DRT
Primary transmission gear 28 Teeth (28-68) for Vespa 50-90-125 Primavera/ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Z 28 on Z68 ratio--> 2.65
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly replacing the original 24-tooth sprocket.
2 mm base clutch cover for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK S/XL/N/HP
Material-> Aluminum, thickness 2 mm
1 mm base clutch cover for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK S/XL/N/HP
Material-> Aluminum, thickness 1 mm
Vespa 125/150
Kit including no. 2 coils at 12 volts and current regulator
Complete DRT shock absorber kit for Vespa 50/90/125 Primavera ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Vespa 50/80/125/150/160/180/200 PX-PE-PK
In aluminum
Modified DRT bearing for ETS crankshaft mounting on original crankcase
Vespa 50/90/125 Primavera ET3
Vespa 50/125 PK S/XL/N
By following the instructions and performing a very simple connection to the casing, it will be possible to install a housing with the 25x38x15 roller bearing inside, allowing the installation of the much more efficient ETS crankshaft.
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Balanced, raised, and treated basket (anti-groove), ground sliding plane, complete with shock absorbers.
Ratio--> 2.54
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. Frequently used for acceleration races.
Note: Correct functioning is not guaranteed with primary Z.67.
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T 412374>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 125/150/200 PX
Vespa 125 T5 VNX5T
Measurements: 34x15x3.8mm
Vespa 50/90/125/150
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Balanced, raised, and treated basket (anti-groove), ground sliding table, complete with shock absorbers.
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (FL) VMX7T
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Balanced, raised, and treated basket (anti-groove), ground sliding surface, complete with shock absorbers.
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
It fits perfectly replacing the original 27-tooth sprocket.
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S/XL/N/HP
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Particularly suitable for those who simply want to install a PK FL2 clutch pack, having a different thickness from the classic one, thanks to this Kit the axial play will be reduced. A detailed diagram is included in the package.