RDV Scootershop

Front brakes for Si, Ciao, and Bravo

If the rear brake helps manage speed, the front brake is crucial for decisive stops and traffic safety. In this section, you will find everything needed to overhaul the front system of your Piaggio Ciao, Si, or Bravo: from pairs of brake shoes (standard or grooved to better discharge dust) to complete cables with sheaths, up to adjusters and handlebar levers. Replacing frayed cables or "glazed" brake pads is the only way to eliminate that feeling of long or spongy braking and return to driving with full control of the vehicle.

Filtri
there are 13 products
chiudi
there are 13 products
You are filtering for:
  • Yes/Hello/Well done
  • Front axle
  • Front brakes
Model
Request more info
I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required
thank you

Your request has been successfully forwarded to the staff, you will be contacted as soon as possible.

Modellino
Parti
    Modellino
    Parti
      Modellino
      Parti
        there are 13 products
        -25% Front brake shoe pair MALOSSI Ø=104x20mm for Piaggio Ciao Si Bravo Boxer (models with alloy wheel)
        Available
        Compatibility

        Piaggio Ciao, Yes, Bravo

        technical specifications

        Note--> For models with alloy wheels

        These brake pads have been designed and tested by our technicians to easily withstand the stress imposed by extreme use and mainly for racing vehicles that require significant deceleration and consistent performance at higher temperatures. For this reason, Malossi brake pads are made from a special magnesium aluminum alloy, with a special friction material containing metallic fibers that enhance resistance properties, asbestos-free according to new EEC standards. The new friction material compounds are environmentally friendly, offering characteristics far superior to the average and excellent noise reduction features, ensuring modular and progressive braking, shorter braking distances, and extremely limited friction material wear. The oblique cuts for dust discharge have been studied and tested over years of competitions.

        Approfondisci
        Shipping time
        24/48 hours
        20,86 € 27,81 €
        17,10 € VAT excluded
        1 point RDV = 2 cents 20 points RDV = 0,40 € cashback
        Front brake shoe pair BGM PRO Ø=104x20mm for Piaggio Ciao Si Bravo Boxer (models with alloy wheels)
        low availability
        Compatibility

        Piaggio Ciao, Yes, Bravo

        technical specifications

        Note--> For models with alloy wheels

        Approfondisci
        18,90 €
        15,49 € VAT excluded
        1 point RDV = 2 cents 18 points RDV = 0,36 € cashback
        BGM PRO brake shoe set Ø=90x18mm for Piaggio Ciao Sì Bravo Boxer (models with spoked wheel)
        Available
        Compatibility

        Piaggio Ciao
        Piaggio Sì
        Piaggio Bravo
        Piaggio Boxer

        technical specifications

        ONLY for models with Spoke Wheels

        QUALITY The BGM Pro brake shoes are exclusively produced for BGM by one of the most renowned Italian brake pad manufacturers. The pad material comes from the German manufacturer Beral. The aluminum brake shoe holder is cast in the original molds, ensuring a perfect fit every time.

        MATERIAL + PERFORMANCE The BGM PRO brake pad compound has a high friction coefficient, averaging over µ=0.54, which is maintained over a wide temperature range. The BGM PRO pad can withstand temperature peaks of up to 350°C and is therefore suitable for even the most demanding applications.

        CONTROL + RESPONSE The braking behavior is powerful from the start, yet easy to predict and control. These good characteristics do not diminish even under heavy loads. With a medium pad hardness of over 71 shore, the pad is not too soft and provides clear feedback on the brake lever.

        ENVIRONMENT The BGM pad material is produced without the use of solvents. It does not contain heavy metal compounds and, of course, is asbestos-free. The BGM PRO brake pads are intentionally unpainted for environmental reasons. They are produced in compliance with ECE R-90 regulations.

        Approfondisci
        Shipping time
        24/48 hours
        18,90 €
        15,49 € VAT excluded
        1 point RDV = 2 cents 18 points RDV = 0,36 € cashback
        -15% Front disc brake kit version Black 220mm and 104mm hub GP Racing parts for Piaggio Ciao with alloy rim
        Available
        Compatibility

        Piaggio Ciao with alloy wheels

        technical specifications

        PIAGGIO CIAO FRONT BRAKE KIT – STANDARD 220MM (104MM HUBS)

        The Standard Front Brake Kit for Piaggio Ciao offers a hydraulic system with a 220 mm disc, significantly improving braking power compared to the original system, making it precise and safe.

        The version with 104 mm hubs ensures compatibility specifically with alloy wheels.

        The wheel axle, related spacers, and bearings allow the replacement of the original internal system of the front wheel, ensuring greater smoothness, stability, and durability!

        Material and composition of the kit:

        104 mm internal hubs: Aluminum

        220 mm brake disc

        Specific caliper support bracket for Ciao

        DEDICATED brake caliper

        DEDICATED brake lever

        100 cm BRAIDED brake hose

        ERGAL spacers

        SKF wheel bearings

        Stainless steel axle special stainless steel washers

        SHIMMING BETWEEN BRACKET AND BEARING

        COUNTERSUNK SCREW TO BE REPLACED IN THE FORK TO AVOID COLLISIONS WITH

        Approfondisci
        Shipping time
        24/48 hours
        329,00 € 388,80 €
        269,67 € VAT excluded
        1 point RDV = 2 cents 329 points RDV = 6,58 € cashback
        -17% Front disc brake kit GP Racing parts (220 mm disc) for Piaggio SI
        Available
        Compatibility

        Piaggio Ciao with alloy wheels

        technical specifications

        PIAGGIO SI FRONT BRAKE KIT – STANDARD 220MM (104MM HUBS)

        The Standard Front Brake Kit for SI offers a hydraulic system with a 220 mm disc, significantly improving braking power compared to the original system, making it precise and safe.

        The version with 104 mm hubs ensures compatibility specifically with alloy wheels.

        The wheel axle, related spacers, and bearings allow for the replacement of the original internal system of the front wheel, ensuring greater smoothness, stability, and durability!

        Material and composition of the kit:

        104 mm internal hubs: Aluminum

        220 mm brake disc

        Specific caliper support bracket for Ciao

        DEDICATED brake caliper

        DEDICATED brake lever

        100 cm BRAIDED brake hose

        ERGAL spacers

        SKF wheel bearings

        Stainless steel axle special stainless steel washers

        SHIM BETWEEN BRACKET AND BEARING

        COUNTERSUNK SCREW TO REPLACE IN FORK TO AVOID COLLISIONS WITH DISC

        Installation:<

        Approfondisci
        Shipping time
        24/48 hours
        299,00 € 358,80 €
        245,08 € VAT excluded
        1 point RDV = 2 cents 299 points RDV = 5,98 € cashback
        Coppia ganasce freno Newfren pro race per Piaggio Ciao Sì Bravo Boxer (modelli con cerchio a raggi)
        low availability
        Compatibility

        Piaggio Ciao
        Piaggio Sì
        Piaggio Bravo
        Piaggio Boxer

        technical specifications

        SOLO per modelli con Ruote a Raggi

        Approfondisci
        12,00 €
        9,84 € VAT excluded
        1 point RDV = 2 cents 12 points RDV = 0,24 € cashback
        Coppia ganasce freni anteriori Newfren pro race per Piaggio Ciao Si Barvo Boxer (modelli con cerchio in lega)
        Available
        Compatibility

        Piaggio Ciao, Si, Bravo

        technical specifications

        Note--> Per modelli con cerchi in lega

        Approfondisci
        Shipping time
        24/48 hours
        14,00 €
        11,48 € VAT excluded
        1 point RDV = 2 cents 14 points RDV = 0,28 € cashback
        -17% Kit freno a disco anteriore 220mm e mozzo 104mm GP Racing parts per Piaggio Ciao con cerchio in lega
        Available
        Compatibility

        Piaggio Ciao con cerchi in lega

        technical specifications

        KIT FRENO ANTERIORE PIAGGIO CIAO – STANDARD 220MM (MOZZI 104MM)

        Il Kit Freno Anteriore Standard per Piaggio Ciao offre un sistema idraulico con disco da 220 mm, migliorando notevolmente la potenza frenante rispetto all’impianto originale, rendendola precisa e sicura.

        La versione con mozzi da 104 mm garantisce compatibilità specificatamente con i cerchi in lega.

        L’asse ruota, i relativi distanziali e i cuscinetti permettono di sostituire il sistema originale interno del cerchio anteriore garantendo maggiore fluidità, stabilità e durabilità!

        Materiale e composizione del kit:

        Mozzi interni da 104 mm: Alluminio

        Disco freno 220 mm

        Staffa supporto pinza specifica per Ciao

        Pinza freno DEDICATA

        Leva freno DEDICATA

        Tubo freno 100 cm TRECCIA

        distanziali ERGAL

        Cuscinetti ruota SKF

        ASSE inox rondelle speciali inox

        RASAMENTO TRA STAFFA E CUSCINETTO

        VITE SVASASATA DA SOSTITUIRE NELLA FORCELLA PER EVITARE COLLISIONI CON DISCO

        Compatibilità e versioni:

        Compatibile con Piaggio Ciao con mozzi da 104mm.

        Installazione:

        Sistema plug & play, senza modifiche strutturali.

        Approfondisci
        Shipping time
        24/48 hours
        299,00 € 358,80 €
        245,08 € VAT excluded
        1 point RDV = 2 cents 299 points RDV = 5,98 € cashback
        Brake Jaw Pair for Piaggio Bravo
        Available
        Available
        01-BQ-038-CI
        01-BQ-038-CI

        Brake Jaw Pair for Piaggio Bravo

        Compatibility

        Piaggio Bravo

        technical specifications

        ONLY for models with Alloy Wheels hub mm. 90

        Approfondisci
        Shipping time
        24/48 hours
        8,40 €
        6,89 € VAT excluded
        1 point RDV = 2 cents 8 points RDV = 0,16 € cashback
        Pair of front brake shoes for Piaggio Ciao Si Bravo Boxer (models with alloy wheels)
        Available
        Compatibility

        Piaggio Ciao, Yes, Bravo

        technical specifications

        Note--> For models with alloy wheels

        Approfondisci
        Shipping time
        24/48 hours
        11,90 €
        9,75 € VAT excluded
        1 point RDV = 2 cents 11 points RDV = 0,22 € cashback
        Brake Shoe Set for Piaggio Ciao Sì Bravo Boxer (models with spoke wheels)
        Available
        Compatibility

        Piaggio Ciao
        Piaggio Yes
        Piaggio Bravo
        Piaggio Boxer

        technical specifications

        ONLY for models with Spoked Wheels

        Approfondisci
        Shipping time
        24/48 hours
        8,56 €
        7,02 € VAT excluded
        1 point RDV = 2 cents 8 points RDV = 0,16 € cashback
        -11% Front plate machined from solid GR Racing parts for Piaggio Ciao with 16-inch alloy wheels
        Available
        technical specifications

        Front plate machined from solid, Plug and Play, designed to mount 16-inch alloy wheels on Piaggio Ciao.

        Compatible with the original fork.

        Material: T6 6082 aluminum
        Diameter: 104 mm

        Approfondisci
        Shipping time
        24/48 hours
        70,00 € 78,40 €
        57,38 € VAT excluded
        1 point RDV = 2 cents 70 points RDV = 1,40 € cashback
        complete front&#x2F;rear cable clamp kit
        Available
        Available
        01-CI-011-OL
        01-CI-011-OL

        complete front/rear cable clamp kit

        Compatibility

        Piaggio Ciao/Si/Bravo/Boxer/

        Approfondisci
        Shipping time
        24/48 hours
        2,30 €
        1,89 € VAT excluded
        1 point RDV = 2 cents 2 points RDV = 0,04 € cashback

        Hai visualizzato 13 di 13 prodotti