Malossi
Kit 2 bushings D. 11x8.2x10 for Malossi V-ONE and VR-ONE Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE engine case
Malossi V-ONE and VR-ONE engine casing Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa GTS/GTS Super 125/300ccm (2023-)
111.2x36.2/98.0x32.6mm
With the help of all available information on manufacturers and our many years of experience, we have tried to address the issue of brake components as error-free as possible, but unfortunately, this is not possible 100%. Depending on availability at the time of vehicle production, manufacturers may use different combinations of components. In case of doubt, we therefore ask you to verify compatibility with the product photos and specified dimensions before ordering. It goes without saying that items ordered by mistake can be returned with sufficient shipping costs and in like-new/sellable condition within the legal terms. Thank you for your understanding.
MALOSSI Sport brake pads have a special organic compound that combines excellent braking performance with huge safety reserves. The very high thermal stability for an organic pad ensures excellent feedback even in extreme conditions and thus allows precise dosing of the braking force.
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Malossi air filter diameter 35.5 angled at 30° for PHVA/B (12-17.5)-PHBN (17.5)-PHBG-PHBL carburetors
Vespa 50/90/125/150/200
Filter size: 80x80mm
Mount diameter: 35.5 mm
Vespa 50/90/125/150/200
Filter dimensions: 94x103mm
Mounting diameter: 42/50/60 mm, offset clamp fastening
Pair of MALOSSI MHR Synt S52 brake pads (rear) for Vespa 125/150/200/250/300 GTS/GTS Super/GTV/GT 60/GT/GT L
Vespa 125/150/200/250/300 GTS/GTS Super/GTV/GT 60/GT/GT L
Dimensions--> 55.5x49.5x7.2 mm
Approval; e14 mark
SMART BATTERY CHARGER & MAINTAINER 6V/12V 1A for batteries from 2 to 20 Ah
All models
Battery maintenance function during the winter period
Clutch side crankshaft oil seal MALOSSI FKM 31x62x5.8 mm for Vespa PX125/150/180/200 E Arcobaleno 2°/'98'MY'11/T5/Cosa/Rally
Vespa PX 80 E V8X1T 3000997>
Vespa 125 PX E Arcobaleno Elestart VNX2T 280359>
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa PX 150 E Arcobaleno Elestart VLX1T 711688>
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 150 PX VLX1T Millennium '98
Vespa 150 PX 2011 ZAPM74200
Vespa PX 200 E Arcobaleno Elestart VSX1T 3012203>
Vespa 200 PE VSX1T Millennium '98
Vespa
Malossi VR-ONE bare engine casing with reed valve for Vespa 200 PX-PE
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
The V-One is designed for those who want a casing perfectly replaceable with the original, provided with all the components necessary for assembly and allowing maximum interchangeability with components available on the market, it requires no aesthetic modification of the vehicle and fits all original Piaggio parts.
The crankcase seats are designed to accept the original crankshaft bearings and seals (not provided). V-One can be mounted with the original Dell’Orto Si 24-24 carburetor.
It is possible to use the original crankshaft or our rotary valve crankshaft with a 57mm stroke art. 5316082. Whatever the choice, the intake has been reviewed and implemented thanks to our modern
CAD systems that have profiled an optimized intake duct in the casing.
Entirely made in ITALY
------------------------------------------------------------------------------------------------------------
Without mixer
With electric start
Reed valve (Not included)
Complete thermal group Malossi MHR CVF2 crossbar in aluminum (177 cc) for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Bore: 63 mm-Stroke: 57 mm-Long reach spark plug
The thermal group is completely new and designed in every
part to achieve the best result in terms of performance and
durability. Every aspect of the system has been studied to maximize
mechanical resistance, fluid dynamics, and improve combustion: the
result is a top-of-the-range kit for construction quality and technological advancement.
Piston Ø 55 with pin Ø 12 and 2 rectangular segments selection 0 for complete thermal group 102 cc
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore: 55 mm
selection 0
Malossi MHR crankshaft bearing kit for VR-ONE crankcase or original 200 crankcase
Compatible with Malossi VR-ONE engine cases and original Piaggio 200 cases
Elastic band kit Ø 55X1.5 rectangular complete thermal group Malossi in cast iron (102 cc) for Vespa 50 N/L/R-Special-PK
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
2 reed petals 0.35mm MALOSSI VL19 for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
(thickness): 0.35mm
Laminated pack MALOSSI VL19 engine casing VR-ONE for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
(thickness): 0.35mm
Elastic ring piston pin cylindrical section Ø 15X1.2 (2pcs)
Vespa 80/125/150
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millenium '98
Vespa 200 Cosa VSR1T
The V-One is designed for those who want a perfectly replaceable casing to the original, supplied with all the necessary components for assembly and allowing maximum interchangeability with components available on the market, requiring no aesthetic modification of the vehicle and fitting all original Piaggio parts.
The crankcase seats are designed to accept the original crank bearings and seals (not supplied). V-One can be mounted with the original Dell’Orto Si 24-24 carburetor.
It is possible to use the original crankshaft or our rotary valve crankshaft with a 57mm stroke art. 5316082. Whatever the choice, the intake has been revised and implemented thanks to our modern
CAD systems that have profiled an optimized intake duct in the casing.
Entirely made in ITALY
Starter cable and throttle cable MALOSSI complete with sheath for Vespa 125/150 VNB-GT-GTR-TS-Sprint-Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Thermal group without head Malossi sport CVF2 in aluminum (210 cc)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Bore: 68.5 mm
Stroke: 57 mm
Long reach spark plug
Power range: 16>23 hp
7 ports
Malossi clutch spring kit for Vespa PX125-200 E Lusso `95-< /`98/MY/`11/Cosa 2
Vespa 125 Cosa VNR1T
Vespa 150 Cosa 2 VLR1T
Vespa 200 Cosa 2 VSR1T
Vespa 125 PX 2011 ZAPM74100
Vespa 150 PX 2011 ZAPM74200
Vespa 125 PX VNX1T Millennium
Vespa 150 PX VLX1T Millennium
Pair of MHR SYNT brake pads for Vespa 125/150/200/250/300 GTS/GTS Super/GTV/GT 60/GT/GT L/Primavera/Sprint
Vespa 125/150/200/250/300 GTS/GTS Super/GTV/GT 60/GT/GT L/Primavera/Sprint
Dimensions--> 97x41x9.0 mm 77x41x9.0 mm, hole distance 25mm
Vespa 50/90/125
Malossi intake manifold d.25 to the crankcase for Vespa 50 PK S-125 PK S
Vespa 50 PK S-125 PK S
Ape 50 FL/FL2
Malossi clutch disc kit (3 discs) for Vespa 50/90/125 Primavera ET3
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Complete with spring and metal discs
PHBE Ø 36 AS carburetor with elastic attachment for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
All models / Tutti i modelli
High-performance gearbox lubricant specifically designed for the Vespa world, its formula protects the gears from wear by reducing drag due to viscosity, while ensuring precise and silent gear changes. Also tested on all types of clutches with excellent results.
Package of 0.250 L
Vespa PX disc brake from 2000
The pads with sintered friction material have the highest coefficient of friction and therefore ensure shorter stopping distances with breathtaking decelerations. Their peculiarity is the ability to maintain consistent performance regardless of temperature and weather conditions.
Dimensions--> 48.8x35.3x6.9 mm
For installation on the original caliper, it is necessary to trim the pads laterally.
Multivar Variator Rollers Malossi HTRoll 20X17 gr. 15 for Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 200-300ccm
Vespa GTS/GTS Super/GTV/GT 60/GT/GT L 200-300cc
20x17 mm
15.0 g
PHBH Ø 30 B elastic mount carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Malossi gasket kit for thermal unit d.68.5mm (210 cc) for Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Bore: 68.5 mm
Stroke: 57 mm
Long thread spark plug
Power range: 23>30 hp
7 transfers
MHR Version: The MHR version differs from the SPORT one not only in the exhaust port, but also in the decidedly racing transfer diagrams.
Piaggio Ciao, Yes, Bravo, Boxer
Rubber intake manifold for PHBH 26 B carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Malossi power exhaust black sound muffler for Vespa 125/150 PX-LML
Vespa 125/150 PX
LML 125/150
Malossi power exhaust has been redesigned, increasing the power compared to previous models by about 5%, thanks to an in-depth study that involved the internal surfaces of the sheet metal with which the expansion is made.
Painted in black
Pair of fluorescent yellow grips with Malossi MHR YELLOW logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-safety-comfort.
Every detail has been designed and defined according to these three essential elements for an aggressive design, secure grip, and comfort while riding.
In particular, the design promotes vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR FLUO grips are made from a particularly soft PVC, the result of extensive research aimed at selecting special polymers with high elasticity, whose soft touch conveys a sense of pleasure and comfort to the user. This PVC lends itself to the most sophisticated colors and possesses excellent degrees of brightness. The aesthetic result of the MHR FLUO grips is extremely attractive and combines with high durability characteristics.
Piaggio Ciao-SI-Bravo
TECHNICAL FEATURES
Half-shaft material: 18 Ni Cr Mo5.
Monolithic forged half-shafts and rotating masses.
Machining on high-precision machine tools.
Five heat treatments on all components.
High surface finish to improve reliability.
Dynamic balancing up to 16,000 rpm.
Forged rod in copper-plated 18 Ni Cr Mo5, coupled to the shaft with a precision roller bearing for high speeds.
Pair of fluorescent orange grips with Malossi MHR ORANGE logo for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The new Malossi MHR grips aim for a trio of elements: design-safety-comfort.
Every detail has been designed and defined according to these three elements, essential for an aggressive design, grip safety, and comfort during riding.
In particular, the design favors vibration absorption, the dimensions make the grip secure and manageable, and the ergonomic structure allows the palm to rest without inflaming the forearm.
The Malossi MHR FLUO grips are made from a particularly soft PVC, the result of extensive research aimed at selecting special polymers with high elasticity, whose soft touch provides a pleasant and comfortable sensation to the user. This PVC lends itself to the most sophisticated colorations and possesses excellent degrees of gloss. The aesthetic appeal of the MHR FLUO grips is extremely captivating and is combined with high durability characteristics.
Malossi BIG DEPS Ø47 aluminum thermal group with Ø12 pin for Piaggio Ciao-CiaoPX
Hello/Hello PX
The only cylinders on the market for CIAO/SI with split exhaust and symmetrical transfers!
The exhaust fitting is screwed on and offers two great advantages: Extreme resistance and the possibility of replacement in case of breakage Possibility to enlarge the exhaust outlet, further increasing performance These results have been made possible by the decompression valve provided in the kit, which is smaller than the original Piaggio one.
The most important innovation is represented by the completely redesigned internal transfer system, specifically studied to achieve cylinder washing while maximizing power at the correct usage regime.
Attention: On original Piaggio crankcases, it is necessary to bore.