Malossi
Complete thermal group gasket kit Malossi Ø 63 in Aluminum for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Malossi Piston Ø 63.4 mm with two rectangular rings for Vespa 125 GTR 2°/TS/150 Sprint 2°/V/Super 2°/PX125-150/PE/Lusso/Cosa
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Ø 63.4mm
2 piston ring(s)
piston pin Ø 15mm
Vespa 50/90/125/150/200
Filter dimensions: 94x103mm
Mounting diameter: 32/38 mm, offset clamp fastening
X SPECIAL belt for variator 13x6.5x1143 mm - 34° angle for Piaggio SI-Bravo
Piaggio SI-Bravo
Malossi thermal group base+CVF Ø43 65cc in cast iron pin Ø12 for Piaggio Bravo-Boxer-SI
Yes-Bravo-Boxer
Have fun without complications
(6 transfers - 2-segment piston)
Malossi cast iron thermal units, the first and simplest step to modify your moped's engine, are the optimal choice to continue using a standard or approved exhaust system.
Ape 50
Piaggio Ciao, Yes, Bravo
Pre-tempered carbon steel springs with high yield strength,
protected by a coating in various colors with high thermal resistance.
The different coloring highlights the load of each series of springs.
Variator contrast spring yellow (OUTER Ø 53.50X115 MM - WIRE Ø 3.7 MM - K 3.8) for Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Pivot shaft 119.6mm with Ø 23 fitting for PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
PIAGGIO CIAO/PX/SC/SI/Boxer/Bravo/Superbravo 50ccm 2T AC
The pivot shaft rotates, the completion of the famous primary gears, has been designed and manufactured to be perfectly housed in the original gearbox without requiring any modification.
Malossi technicians have worked to increase the rigidity and robustness of the shaft itself.
Ideal pairing: Malossi gears, for exaggerated performance!
Note: For maximum operational precision, the gear wheel is mounted with a slight interference on the wheel shaft.
Technical data
Shaft diameter: Ø 23.
Total length: 119.6 mm.
Material: special trilayer steel made to our specifications, case-hardened and tempered.
Manufactured on high-precision machine tools.
Individually checked to ensure exact operational clearance.
Completely ground.
Kit composed of 2 M6x30 screws with 10mm wrench
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Malossi Vespower variable advance electronic ignition with electric start cone 20, 1.2 kg for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Lightened flywheel with external provision for additional masses (not included in the kit), 4-pole 12 V stator (90 Watts) with output for battery charging, red plastic fan with advanced secondary cooling booster blades
(optimized fan profile, optimized absorption distribution)
Vespa 125 GT R VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa P 150 X VLX1T
Vespa PX 150 E VLX1T
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 200 Rally VSE1T 33997>
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Lightened flywheel with external provision for additional masses (not
provided in the kit), 4-pole 12 V stator (90 Watt) with output for
battery charging, red plastic fan with
advanced cooling booster secondary fins
(optimized fan profile, optimized absorption distribution)
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK S/XL, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PK S/XL
Lightened flywheel with external provision for additional masses (not
included in the kit), 4-pole stator 12 V (90 Watt) with output for
battery charging, red plastic fan with
advanced cooling booster secondary fins
(optimized fan profile, distribution absorption)
Vespa 50
Vespa 50 PK
Vespa 125 PK/S/XL/
Vespa 125 ET3
Vespa 125 GT/TS
Vespa 150 GL/Super
Vespa 180/200 Rally
Vespa PX/PE/T5/Cosa
Specific for VESPOWER electronic ignition
Vespa 125 GT R VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa P 150 X VLX1T
Vespa PX 150 E VLX1T
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 200 Rally VSE1T 33997>
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Lightened flywheel with external provision for additional masses (not
included in the kit), 4-pole 12 V stator (90 Watt) with output for
battery charging, red plastic fan with
advanced cooling booster secondary fins
(optimized fan profile, optimized absorption distribution)
Electronic ignition with internal rotor Malossi MHR II cone Ø 20 for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Manages multiple maps simultaneously without having to resort to handheld devices, with a simple click. Allows you to translate the selected map by moving the OFFSET (+ or - 2°).
Malossi ignitions concentrate the maximum technology applied to competitions. The new internal rotor ignitions are born from the need to overcome the technical limitations of the original flywheel-ignition groups, which beyond 10,000 rpm do not guarantee consistent performance, causing significant and sometimes insurmountable tuning problems.
We have made the control unit even more immune to interference by developing a microprocessor based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS to ensure much greater spark precision compared to the previous version!
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows you to shift the selected map + or - 2°
the third (LIM) particularly indicated for 4-stroke engines, allows you to vary the intervention
Vespa 50/90/125/150/200
Additional flywheel weights: allow you to customize the ignition to your vehicle based on the vehicle's preparation, further increasing the moment of inertia.
Dimensions--> Ø 134x105x18
Moment of inertia--> 19 Kg/cm2
WARNING--> Not compatible with Malossi items: 5516956 and item 5517175
Vespa 50/90/125/150/200
Additional flywheel masses: allow you to customize the ignition of your vehicle according to the vehicle's setup, further increasing the moment of inertia.
Dimensions--> Ø 134x105x18
Moment of inertia--> 19 Kg/cm2
WARNING--> Not compatible with Malossi items: 5516956 and item 5517175
Malossi four-speed gear shaft (Z 10-14-17-20) for Vespa 50/125 Special-Primavera-ET3
Vespa 50 S V5SA1T 15325>22444
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 50 Sprinter V5SS1T> V5SS2T
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 Revival V5R1T
Vespa PK 80
Secondary gears Malossi HTQ z55/55 with forced fitting Ø 17 for Vespa 50 Primavera-Sprint 3V-Liberty
Vespa 50 Primavera 3V Euro4 ZAPCA0100 4T AC `17-'18
Vespa 50 Sprint 3V Euro4 ZAPCA0101 4T AC `17
Transmission gears in special straight-toothed steel with a
recalculated ratio. They completely eliminate any axial thrust, reducing the
stress on the bearings. Manufactured with high-precision machines, case-hardened, tempered, and ground to provide high characteristics of quietness and
durability.
Quadruple gear Malossi 4-speed racing gearbox shaft (Z 10-15-18-20)
Vespa 50 S V5SA1T 15325>22444
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 50 Sprinter V5SS1T> V5SS2T
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 50 Revival V5R1T
Vespa PK 80
Multiple gear pivot for Vespa P125-150X 2° /P150S 2°/P200E 2°/PX125 -200E/Lusso/'98/MY/'11/T5 /Cosa
Vespa 125/150/200 Cosa
Vespa 125 PX VNX1T146314>
Vespa 125 PX ZAPM74100 2T AC `11
Vespa 125 PX Cat ZAPM50100 2T AC `07
Vespa 125 PX VNX2T 2T AC `81-`83
Vespa 125 T5 VNX5T
Vespa 125 PX Millennium VNX1T 2T AC `98-`05
Vespa 125 PX Rainbow VNX2T 2T AC `83-`97
Vespa 150 PX ZAPM74200 2T AC `11
Vespa 150 PX Millennium VLX1T 2T AC `98
Vespa 150 PX Rainbow VLX1T
Vespa 150 PX VBX1
Length: 121mm
Bearing seat 15mm, bushing seat 13mm
Complete 4-speed Malossi RACE gearbox for Vespa 50, 90, 125 ET3 Primavera, PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Cluster--> 10-15-18-20
Primary Tree--> 46-49-54-58
Gruppo trasmissione completo over range per Piaggio Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Gruppo trasmissione completo over range
Quando il motore Big Deps e il carter motore Malossi spingono forte, la trasmissione deve stare al passo. Ecco perché è nato l’Over Range Malossi, un sistema completo progettato per supportare prestazioni costantemente in aumento.
Puleggia più grande, controllo totale
Il cuore di questo kit è la nuova puleggia fissa del correttore di coppia Fixed Pulley, con un diametro maggiorato rispetto all’originale che aumenta l’escursione del rapporto di trasmissione.
Risultato? Accelerazione più efficace e prestazioni sempre al top, perché il variatore lavora meglio e sfrutta tutta la potenza disponibile.
E non ci siamo fermati qui. Per garantire resistenza e durata, la puleggia è stata realizzata con materiali speciali e trattata con un processo termochimico particolare, che ne aumenta tantissimo la resistenza all’usura e la resistenza meccanica: in pratica, la rende quasi indistruttibile. Questa puleggia fissa funziona perfettamente accoppiata al correttore di coppia Torque Driver Malossi, che ha il suo stesso diametro.
MULTIVAR MHR 3.0
Un Multivar MHR completa il sistema, con piste per i rulli progettate per un’efficienza massima, molla di contrasto per una risposta più pronta, mozzo – più lungo – per accoppiarsi con una cinghia più potente e ottimizzare i rapporti.
Il Multivar MHR è l’evoluzione delle precedenti generazioni del prodotto e porta nel tuo motore tutta l’esperienza Malossi, acquisita sui circuiti di gara e dalla tecnologia Cad-Cam, per garantirti risultati tecnici ai massimi livelli.
E per sfruttare appieno il range del gruppo correttore di coppia e le potenze oggi sviluppate dai mezzi da competizione, abbiamo progettato una cinghia dentellata Malossi Special Belt (venduta separatamente). Ha una sezione maggiorata e la lunghezza è aggiornata per assicurarti il massimo rendimento in tutte le condizioni di utilizzo.

Attenzione: dopo il montaggio dell’Over Range Malossi non sarà più possibile avviare veicolo a pedale, ti consigliamo di usare il nostro kit avviamento a strappo art. 5019908 (da acquistare separatamente).
Il kit è composta da:
Variatore Multivar MHRPerché adottare il Multivar MHR? Beh, perché in Malossi abbiamo completamente riprogettato questo variatore, a partire dalle piste di scorrimento dei rulli, dal mozzo più lungo e fino alla molla di contrasto.
Torque DriverEcco perché ora è possibile riuscire ad alloggiare un vero correttore di coppia con doppie piste di scorrimento per personalizzare a piacimento la curva di cambiata!
Gruppo puleggia composto da puleggia fissa e mobile con Ø maggiorato da 100 a 110 mm
Puleggia fissa e mobile saldata in un unico pezzo, con boccola appositamente trattata in superficie
Fly ClutchFrizione Ø 107 mm, riprogettata con nuove masse per adattarsi al senso di rotazione inverso rispetto a quello presente nel panorama scooter. L’accoppiamento a molle Malossi consente il funzionamento a un punto di attacco RPM ottimale predefinito. Disponibili come optional 2 serie molle per poter personalizzare il tuo veicolo.
Wing Clutch BellCampana frizione rinforzata con un anello di raffreddamento alettato, perfettamente abbinabile alla frizione Fly Clutch ad alte prestazioni di nuova concezione. Questo è l’unico componente comune allo scooter.
Albero ingranaggio primario
Ci siamo spinti fino alla modifica dell’albero ingranaggio primario per alloggiare un gruppo pulegge e frizione/campana che deriva dal mondo scooter.Diventato l’elemento di connessione tra i componenti di nuova progettazione, questo albero è stato rinforzato con un aumento del Ø del gambo a 13.5 e per essere predisposto ad un eventuale supporto esterno viene fornito con dado, paraolio e guscio a rulli utili per il montaggio.
Special Belt (venduta separatamente)Cinghia a sezione maggiorata, aumentata del 23% (da 13 a 16 mm)
Il gruppo di trasmissione completo Over Range è compatibile con:
PIAGGIO BOSS 50 2T: art. 6118940
PIAGGIO BRAVO 50 2T: art. 6119260
PIAGGIO CIAO PX 50 2T: art. 6119261
PIAGGIO SI 50 2T: art. 6118940

Attenzione: da abbinare esclusivamente alla cinghia Malossi.Attenzione: per poter montare l’albero ingranaggio primario incluso nel kit è necessario aver montato gli ingranaggi primari Malossi art. 6719286 o 67 7021 (6718630 - produzione cessata).
Il variatore Pinasco Overdrive per ciclomotore è stato studiato per garantire prestazioni elevatissime, perfetta intercambiabilità ai componenti originali e affidabilità sono caratteristiche che hanno reso il marchio Pinasco famoso nel mondo. La maggiore escursione complessiva consente l’inserimento di un rapporto più corto in accelerazione ed uno più lungo in velocità massima con ovvi vantaggi in termini di resa complessiva
Ingranaggi primari Malossi HTQ a rapporto corto (13:1) per Piaggio Ciao-Si-Bravo con variatore
Si-Ciao-Bravo con variatore
Questi ingranaggi nascono usufruendo della ventennale esperienza della
Malossi nella progettazione e realizzazione di ingranaggi. I nuovi
ingranaggi H.t.q. sono stati studiati e realizzati con denti dritti /
elicoidali per ridurre al minimo le perdite per attrito e le
sollecitazioni sui supporti. Inoltre i nostri ingranaggi ottimizzano la
rapportatura permettendo di sfruttare tutta la potenza erogata dal vostro
mezzo garantendovi un notevole allungo rispetto la condizione originale.
Gruppo termico Malossi base+CVF Ø43 65cc in ghisa spinotto Ø12 per Piaggio Ciao/Ciao PX
Piaggio Ciao/Ciao PX
(6 travasi - pistone a 2 segmenti)
In questi gruppi termici la caratteristica di elevata durabilità della ghisa si unisce agli standard di qualità quasi maniacali di Malossi, una delle pochissime aziende ad esigere il massimo anche da questa classe di gruppi termici.
In quest’ottica si inseriscono le rigidissime selezioni per l’accoppiamento tra cilindro e pistone rigorosamente mantenuto all’interno della fascia dei 20 micron massimi di tolleranza.
KIT Paraoli completo in FKM più PTFE Ø 30 per Vespa 80/125/150/200 PX-PE-Arcobaleno-Elestart
Vespa PX 80 E V8X1T 3000001> 3000996
Vespa PX 125 E VNX2T 87954>
Vespa 125 PX E Arcobaleno VNX2T>280358
Vespa 125 PX E Arcobaleno Elestart VNX2T> 280358
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 Cosa VNR1T
Vespa PX 150 E VLX1T 455340>
Vespa PX 150 E Arcobaleno VLX1T >711687
Vespa PX 150 E Arcobaleno Elestart VLX1T >711687
Vespa 150 Cosa VLR1T
Vespa P 200 E VSX1T 153348>
Vespa PX 200 E VSX1T 153348>
Vespa PX 200 E Arcobaleno VSX1T >3012202
Vespa PX 200 E Arcobaleno Elestart VSX1T >390401
Vespa 200 Cosa VSR1T
Paraoli con caratteristiche speciali, ad alta qualità
Basso attrito radente e con durata pressoché illimitata.
Gli anelli di tenuta olio FKM più PTFE vantano l'utilizzo dei materiali più
nobili e delle tecnologie più avanzate, nonché la qualità della produzione
che, da sempre, è la forza e l'orgoglio della Malossi.
Disco freno Brake power MHR per 50/125/150/200 ET2-LX-ET4-PX-Zip-Sfera
Vespa 50 ET2
Vespa 50 LX 2T/4T
Vespa 125 ET4
Vespa 125 LX
Vespa 125 PX 1998>
Vespa 150 PX 1998>
Zip
Sfera
Diametro: 200 mm
Spessore: 4 mm
Carter motore Malossi V-ONE valvola rotante per Vespa 125/150 GT-TS-Sprint-GL-PX
Vespa 125/150 GT-TS-Sprint-GL-PX
Il V-One è stato pensato per chi desidera un carter perfettamente
sostituibile all’originale, fornito con tutta la componentistica
necessaria al montaggio e che consenta la massima intercambiabilità con i
componenti presenti sul mercato,non richiede alcuna modifica estetica
del veicolo e si adatta a tutte le parti originali Piaggio
Le sedi di banco sono progettate per accettare i cuscinetti e i paraoli
manovella originali (non forniti). V-One può essere montato con il
carburatore originale Dell’Orto Si 24-24È possibile l’utilizzo
dell’albero motore originale oppure del nostro albero motore a valvola
rotante con corsa 57mm art. 5316082. Quale che sia la scelta,
l’alimentazione è comunque stata rivista e implementata grazie ai nostri
modernisistemi CAD che hanno profilato un condotto di immissione nel carter ottimizzato.Realizzati interamente in ITALIA
Vespa 200 PX/PE
Corsa 57 biella 110
Fase di aspirazione ricavata all'interno della semispalla, nella struttura a messe circolari stessa.Tale lavorazione porta ad una notevole asolatura rivolta verso l'interno, pur mantenendo un profilo esterno regolare.
Vespa 125/150/160/180/200
Porta candela creato in PLA e stampato in 3D.
Molla di contrasto variatore bianca 73x96 mm - Ø filo 6 mm - k 14,1 per Ciao/Si/Bravo/Boxer
Piaggio Ciao/Si/Bravo/Boxer
Pistone Malossi ø 68,5 2 segmenti trapeziodali cromati selezione 0 (215 cc) per Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millenium '98
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
The V-One is designed for those who want a perfectly replaceable casing for the original, provided with all the necessary components for assembly and allowing maximum interchangeability with components available on the market, without requiring any aesthetic modification of the vehicle and adapting to all original Piaggio parts.
The crankcase seats are designed to accept the original crankshaft bearings and seals (not supplied). V-One can be mounted with the original Dell'Orto Si 24-24 carburetor.
It is possible to use the original crankshaft or our rotary valve crankshaft with a 57mm stroke, item no. 5316082. Whatever the choice, the intake has been revised and implemented thanks to our modern
CAD systems that have profiled an optimized intake duct in the casing.
Entirely made in ITALY
Primary Malossi HTQ long ratio gears (9:1) for Piaggio Ciao-Si-Bravo with variator
Yes-Hello-Good with variator
These gears are born from the twenty-year experience of
Malossi in the design and production of gears. The new
H.t.q. gears have been studied and made with straight /
helical teeth to minimize friction losses and
stress on the supports. Moreover, our gears optimize the
gearing, allowing you to exploit all the power delivered by your
vehicle, ensuring a significant extension compared to the original condition.
Malossi MP-ONE reed valve engine casing for models with Ciao-SI-Bravo-Boxer electronics
Piaggio Ciao/Si/Bravo/Boxer
Pair of shot-blasted silicon aluminum alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal group, exhaust system, crankshaft, and
intake system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific intake system has been created with a 19 mm carburetor and E12 type air filter, complete with all components for
installation.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great commitment of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of installation, excellent operating result
without modifications (everything connects as in the original engine).
The large 4-petal composite fiber reed valve ensures a
Malossi MP-ONE reed valve engine casing for models with points ignition Ciao-SI-Bravo-Boxer
Piaggio Ciao/Si/Bravo/boxer
Pair of shot-blasted aluminum-silicon alloy die-cast crankcases.
Integral Malossi project with reed valve intake, controlled by a large
4-petal valve.
They can be used with any thermal unit, exhaust system, crankshaft, and fuel system.
The Malossi reed valve crankcases are perfectly interchangeable with the
original ones and are equipped with a special intake manifold for the
original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburetor and E12 type air filter, complete with all the components for mounting.
Given the very limited insertion spaces in Piaggio frames, it was
necessary to create a super compact engine, and the great effort of
our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, robustness,
simplicity, ease of assembly, excellent operating result
without modifications (everything connects like in the original engine).
The large 4-petal composite fiber reed valve ensures a