Polini
Polini 0.3mm lamella petal for Polini monolamellar collectors
for Polini laminated pack 213.0044
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Dimensions--> 58.5x70mm, thickness 0.5 mm
Complete Polini piston (75cc) with a diameter of ø 47.00 for Vespa 50 Special-N-L-R-PK
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Polini Clutch Kit modification with 4 discs for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 90 V9A1T
Vespa 125 VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK
Racing clutch disc series with 4 discs and reinforced spring. The clutch discs have been improved with a new material that increases the friction coefficient to enhance grip under stress.
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
By clicking on purchase, all available sizes will be displayed
Thickness--> 1.5 mm
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
By clicking on purchase, all available sizes will be displayed
Thickness--> 1.5 mm
Polini intake manifold with 3 holes d.30mm for Vespa 125 PK XL/N/HP/FL
Vespa 50 PK XL/N/HP
Vespa 125 PK XL/N/HP
Vespa 125 PK ETS VMS1T
Sleeve attack (diameter 34mm)
For carburetors PHBL PHBH -22 - 24 - 25 - 28
Vespa 50/125 PK /XL/N
In Aluminum, 3 Holes
Complete with sleeve, clamps, and studs
Polini head gasket 208/210/221 cc thickness 0.25 mm for Vespa 200 PX/PE/Rally/Cosa
Vespa 200 PX/PE/Rally/Cosa
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Vespa 125 Primavera, Vespa 125 Primavera ET3
Polini starter cable tie rod kit for Dell'orto VHST carburetor
VHST Carburetors
Ape 50
Polini Racing Exhaust for Vespa 125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
With the RS Racing, Polini has added a sporty version to the already available "original" version.
The modified manifold makes the system suitable for large
displacement cylinders and higher regimes, which is also reflected in the
larger diameter of the exhaust terminal. The RS Racing is obviously noisier than the standard version. It is suitable, for example, for the Polini 133 Alu or even the EVO.
POLINI RS RACING FEATURES
Larger manifold (Ø29 mm)
Modified cone
Larger exhaust pipe
Also suitable for wide 3.50-10 tires
Pleasant sound emission
Available for Vespa PV/ET3
The wonderfully antique look, with the exhaust pipe exiting
sideways like the well-known "banana", perfectly hides the
elaborate internal construction, including sound insulation. The
only external clues to the modern design are the elastic suspension
of the exhaust through a silent rubber on the crossbar and the
two-part, spring-loaded
Thickness POLINI tray for carburetor SI 20:20-24:24-26:26 for Vespa 125/150/200
Vespa 125/150/200
For SI carburetors
Polini thermal group 4 studs d47 sp12 for Piaggio Ciao-SI-Bravo-Boxer-Grillo
Piaggio Ciao-SI-Bravo-Boxer-Grillo
(on Polini 4 bolt engine case)
Polini ignition only for Piaggio mopeds originally equipped with electronic ignition
Yes-Hello-Good (only for models originally equipped with electronic ignition)
Yes Hello Good Boxer
Racing exhaust POLINI for Vespa 125 VNA/VNB/GT 1°/GTR 1°/Super/150 VBA/VBB/VGLA/B/GL/Sprint 1°/V 1°/Super 1°/
Vespa 125 GT 1°/GTR 1°/Super/150 VGLA/B/GL/Sprint 1°/V 1°/Super 1°/
Complete piston POLINI D.60 SELECTION A (59.935) 144/153/154 cc for ROTAX 123/ GT FALC V0012 "R"/V0013D/V0012D
Ø 60mm
2 Segments
piston pin Ø 15mm
2-hole reed valve intake manifold d.24/30 for Vespa 50/90/125 Special-N-L-R-Primavera-Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special
Vespa 125 Primavera VMA2T
Vespa 125 Primavera VMB1T
Sleeve attack (diameter 35mm)
For PWK 28mm carburetors
For PWK/PHBL/VHST carburetors
Vespa P 200 E
Vespa 50/90/125/150/200
Internal diameter SX: 21mm
Internal diameter DX: 23mm
Includes lever guards
Polini Cross (Flat Type) for Vespa PX80-200 E Lusso 2°/'98/MY/'11/T5/Cosa
Vespa 125 PX VNX2T 232053>
Vespa 150 PX 624302>
Vespa 200 PE VSX1T 315267>
Vespa 125/150 Sprint V-TS-PX
Suitable for 177cc Polini thermal groups, thickness 0.2mm in aluminum
Vespa 50/90/125/150/200
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Suitable for Polini thermal groups 208/210/221cc
Diam. 68.5 mm with centering hole
Vespa 50 S V5SA1T
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2T
Vespa 50 Elestart V5A3T
Vespa 50 Special V5B1T
Vespa 50 Elestart V5B2T
Vespa 50 Special V5B3T
Vespa 50 Elestart V5B4T
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Polini intake manifold for PHBL 24 Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Material: Aluminum Application: For Carburetors 24:24
carburetor connection: 28.5mm
2 holes
rotary disc valve
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
All models
3-hole intake manifold (35mm connection) for Vespa 50/125 Special-Primavera
Main feature: 3-hole flange
Suitable for 28 PWK carburetor
Sleeve fitting
Complete piston POLINI D.60 SELEZ.B (59.935) 144/153/154 cc for ROTAX 123/ GT FALC V0012 "R"/V0013D/V0012D
Ø 60mm
2 Segments
piston pin Ø 15mm
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Roller cage included
Note: Advanced
Stroke 57 mm
Cone: 20
Polini exhaust without silencer for Vespa 50 Special/V5A1T N/L/R
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
With Approval D.G.M. 37519 S
Painted in black
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2T
Carburetor inlet--> 23 mm, 2 holes
Vespa 50 Special V5B3T
Diameter: 21.5 mm