Sip
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
All models / Tutti i modelli
l (cable)=1885mm
19 turns
Ø 2 mm
Material: stainless steel
SIP Classic Tire 3.00-10 50P TL/TT for Vespa 50/90/125 N-L-R-Special-Primavera-ET3-PK
Vespa 50 V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa PK
Vespa 125 Primavera ET3 VMB1T
Note: Tubeless
up to 150km/h
profile: classic
Ø 10"
Approval: with ECE standard
Vespa 50 S V5SA1T
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 SS V5SS1T
Vespa 50 Sprinter V5SS2T
Vespa 90 V9A1T
Vespa 90 SS V9SS1T
Vespa 90 Racer V9SS2T
Round, Ø 48 mm, - 140 (km/h/mph) / 14,000 (Umin/rpm),
Dial color: black, digital/analog, 19 functions
Vespa 80/125/150/200 PX
Included: Lock (Zadi)
Pair of sport brake and clutch levers for Grimeca brake for Vespa 50/125/150/200 Special-Primavera-GT-TS-VBB-PX-Sprint
Vespa 50/125/150/200 Special-Primavera-GT-TS-VBB-PX-Sprint
Non-standard
Rear brake cable with eyelet SIP for Vespa 50/90/25/Primavera/ET3/PK/XLN/HP/ PX80/125/150/200/PE/'98/MY/'11/LML
Vespa 50 V5A1T 922305>
Vespa 50 Special V5B3T 306418>
Vespa 50 V5SA1T 89172>
Vespa 90 V9B1T 11223>
Vespa 125 Primavera VMA2T 0199799>
Vespa 125 Primavera ET3 VMB1T 76046>
Vespa 125 PX VNX1T 77543>
Vespa 125 PX VNX2T
Vespa 150 VLX1T 139228>
Vespa 200 VSX1T 37723>
Vespa PK 50- 125
without sheath, with eyelet
l (cable)=950mm
19 strands
Ø 3 mm
Material: stainless steel
Sip carburetor gasket kit in Aramid SHB16-16F/16G/16H/16L for Vespa 50 N/L/R/S/Special/SR/SS/90/R/SS/125/PK50
for carburetor SHB16-16F/16G/16H/16L
For carburetor SHB16-16F/16G/16H/16L
SIP PERFORMANCE long stroke crankshaft for Vespa 200 Rally VSE1T 33997 ->/P200E /PX200 E/Lusso/MY/Cosa rotary valve, stroke: 60.0mm, conrod: 127.0mm,
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Forged connecting rod, polished, piston pin Ø 16mm, timing: 125°/-5° at TDC, Balanced, silver-plated connecting rod cage.
Chrome-plated aluminum tubeless SIP rim 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10" with pre-installed valve
Chrome
SIP tubeless aluminum rim in polished aluminum color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10" with pre-installed valve
SIP Tubeless full wheel rim beige patina (3.50/8) for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
2.15 Ø 8"
closed
aluminum
beige patina
4 holes
SIP PERFORMANCE Sport suspension spring in black for Vespa 125/150/180/200 Super-GT-GTR-TS-Super-Sprint-Sprint Veloce-Rally
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T (Adaptable)
Vespa 200 Rally VSE1T (Adaptable)
l=165 mm
black
hardness: M, 25% harder
SIP "Classic" Bag/Suitcase, large for luggage rack in brown color
480x300x270 mm
approx. 35 l
eco-leather
dark brown, grey-brown RAL8019
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Engine type: 125cc, T5
Material: Aluminum
5 transfers
Ø 65.0mm
stroke 60mm
Connecting rod: 115 mm
Piston pin Ø 16mm
1L Package
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Muffler type: Box
Engine type: 125cc, T5
Material: steel
black
Suitable for wide tires
SIP Race Supersport Clutch for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Ø 119 mm
4 SIP Cosa clutch discs
3 metal clutch discs, thickness 1x1.5mm, 2x2.0mm
6 spring(s)
without gear wheel
incl. tool
Vespa 50 PK FL/HP/N/XL2
Vespa 125 PK N/Automatic/XL2
Material: Plastic
SIP tubeless aluminum rim in matte silver 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Size--> 2.10-10" with pre-mounted valve
Gas valve/throttle SIP 4.2 carburetor 24-24 for Vespa 200 PE-Rally
Vespa 200
For SI 24-24 carburetors
CNC machined
The throttle valve limits the air flow to the engine. Its degree of opening is determined by the rotation of the throttle grip. The more open it is, the more air can flow. Some butterflies are equipped with air pockets at the top and cutaways at the bottom. These add extra air to the fuel mixture, reducing its volume. Sliders with a flat bottom do not add extra air and are therefore ideal for compensating for a too lean midsection.
Sliders with two additional air pockets are mounted on the SI carburetors currently supplied to meet the exhaust values required by the new PX. However, these slides reduce the mixture to such an extent that tuned engines may experience problems ranging from partial load ringing to piston sticking. The solution to the problem: simply replace the installed throttle valve with a
Vespa 50/90/125/150/200 PX-Special
SIP puller for flywheel side crankshaft bearings for Vespa 50 1° V5A1T -> 92876/S 1° V5SA1T -> 15324/90 1° V9A1T -> 25000
Vespa 50 1° V5A1T -> 92876/S 1° V5SA1T -> 15324/90 1° V9A1T -> 25000
Sip speedometer scaled to 140 Km/h for Vespa 50 Special V5A2>3T/V5B1>4T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Black background, scaled to 160 KM/H
SIP extractor for flywheel side crankshaft bearing/gear selector shaft bearing for Vespa PX80-200/PE/Lusso/Cosa
29/40 mm
1 extractor, 4 parts, S45C
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera ET3
Vespa 125 PK
Vespa 125/150/200 PE
In Galvanized Steel
l=301 mm
Ø 22/24 mm
Spacer between joint and brake shoe plate for Vespa 80/125/150/200 PX-PE 1st series pin Ø 16 mm
Vespa 80/125/150/200 PX-PE 1st series pin Ø 16 mm
Vespa 125 PX E VNX2T >1115
Vespa 150 PX E VLX1T >346430
Vespa 200 PX E VSX1T >112624
Ref.Orig: 174035
Vespa 50 ET2 ZAPC1600
Vespa 50 ET2 ZAPC3810
Vespa 50 Primavera ZAPC5320
Vespa 50 S ZAPC38103
Vespa 50 S 2V ZAPC38901
Vespa 50 Sprint ZAPC53201
Dimensions-->112x68x89 mm
Orig.Ref : 497408
25% more starting power
Racing Exhaust SIP Road 2.0 for Vespa 125/150 VNB-GT-GTR-TS-Sprint-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black
Fork bearing dust cover washer SIP lower frame 26383 - 26383 for Vespa 125 VNA/VNB/150 VBA/VBB/T4
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
In galvanized metal
SIP Double-Layer Air Filter Sponge for Vespa LX (Vietnam)/S (Vietnam)/ Primavera/Sprint 3V i.e.125-150ccm
Vespa LX (Vietnam)/S (Vietnam)/ Primavera/Sprint 3V i.e.125-150ccm
a=15 mm
red/black
Vespa 50/90/125/150/160/180/200
KOSO signal filter for reliable RPM detection directly on the HT cable — universally applicable and ideal in cases of inaccurate RPM readings.
If the RPM signal is inaccurate, the KOSO RPM signal filter can help.
Improved signal at the tachometer input
Universal application
Sometimes, an electronic tachometer may have difficulty displaying the RPM accurately. If the signal is detected directly from the HT cable, the cause may be a "distorted" pulse. The voltage peaks generated by each ignition pulse are not then detected or counted with sufficient precision by the tachometer.
The KOSO signal filter helps to filter the individual ignition pulses more cleanly, thus allowing for a more reliable display of the RPM.
Connection to the SIP speedometer/tachometer
Red = positive 12 V DC
Green = Ground
Brown = brown wire of the SIP tachometer
Place the clamp on the HT cable and set it to 1 pulse in the adjustment menu.
Technical details
Operating voltage: 12 V
Engine gasket and oil seal kit for PIAGGIO CIAO/PX/SC/SI/Bravo/Superbravo/Grillo/Boss 50ccm 2T AC with variator
Piaggio Ciao, Bravo, SI
For models WITH Variator
Premium gaskets in aramid
Vespa 150 GS VS2T > VS5T
SIP PERFORMANCE electronic ignition by VAPE Road (fixed advance) 12 V AC for Vespa 150 GS VS1>5T
Vespa 150 GS VS1T
Vespa 150 GS VS2T
Vespa 150 GS VS3T
Vespa 150 GS VS4T
Vespa 150 GS VS5T
-Without Flywheel Fan (mounts the original)
-Flywheel: 1250g
-12 magnets and 9 coils
-110 watts
-Static ignition point
SIP Performance crankshaft with Primatist connecting rod for Vespa 150 GS VS1>5T
Vespa 150 GS VS1>5T
stroke: 57.0mm
connecting rod: 105.0mm
piston pin Ø 15mm
needle cage included
Excellent also on tuned engines
Vespa 150 GS VS1>5T
stroke: 57.0mm
connecting rod: 105.0mm
piston pin Ø 15mm
needle cage included
Also excellent on modified engines
Vespa 50/90/125 Primavera ET3 / PK
- increased wall thickness for greater resistance to mechanical stress
- a very wide cylinder support base and a lot of material underneath that allows for the creation of very generous transfer ports
- Bearing seat on the flywheel side with a seat diameter of 47 as on the Piaggio 50 Special and 125 Primavera ET3 versions
Carburetor-air filter, crankcase-air filter gasket pair in aramid for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
In aramid
2 Pcs.
Vespa 50/125/150/200/250/300