Classic Vespa
Ape 50 FL2-FL3-RST-MIX
Prisoner intake manifold fastening M6x30 for Vespa 50/125 N-L-R/Special/PK-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Including Cylinder Fitting
All models / Tutti i modelli
chrome
l=85 mm
Ø internal 21mm
Complete thermal group BGM PRO 177/187 cc (also for Elestart/electric start) side spark plug for Vespa 125/150 Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
The BGM PRO 177cc is an improved and more powerful version of the proven BGM177 cylinder for Vespa PX125/150, now also compatible with models equipped with electric start.
Everyday Performance
The BGM177 cylinder is designed to offer high performance, durability, and reliability for daily use. By replacing the original cylinder, it is possible to double the power of the standard 125cc engine, with generous torque that allows for smooth riding. The cylinder can also be configured to reach over 20 HP, provided it is paired with the right carburetor, exhaust, and crankshaft. It is therefore an ideal solution for beginners who want to expand performance in the future.
With a displacement of 177cc, the BGM PRO 177 cylinder ensures a safe and relaxed riding experience, maintaining the same reliability and durability as a 200cc engine, operating in the same RPM range as a standard engine. It also offers low fuel consumption and good range. It is compatible with standard components, requiring only a small adjustment of the carburetor jet and spark plug.
Main Features
Material:
SIP Tubeless full wheel rim in black (3.50/8) for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Includes nuts and washers
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
VMC EXPLORER 244cc Thermal Group Ø 72mm CENTRAL SPARK PLUG
Conversion kit for engines: Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
7-port aluminum cylinder, shell moulding technology, nickel-silicon treated liner
Bore 72 mm, Stroke 60mm, Connecting rod 126mm (quattrini shafts) or 127mm (Sip shafts)
Total displacement 244 cc, Main Transfer Phases: ~ 120° Exhaust: ~ 178°
Recessed head with silicone Oring gasket and 8 fastening points to the cylinder
Steel exhaust manifold with silicone Oring gasket fixed to the cylinder with specific bracket and 4 screws
The cylinder features a sleeve of about 8mm that allows proper guidance to the piston even if mounted with a stroke of 62 and 64 mm
The sleeve has a larger external diameter compared to the original cylinders
and requires boring the crankcase inlet to 76mm for 8mm of
depth.
To perform this task manually, a steel base/guide is provided to be screwed to the crankcases <
VMC Ranger thermal group d.69 mm 213/225cc stroke 57-60 in Aluminum for Vespa 200 Rally/P200E/PX200 E/'98/MY/Cosa
Vespa 200 Rally/P200E/PX200 E/'98/MY/Cosa
VMC RANGER Thermal Group Ø69mm 210/225cc stroke 57mm and 60mm for Vespa large frame 200cc engine cases
Entirely produced in Italy, this VMC kit is the result of a constant commitment to research cutting-edge technical solutions and top-quality materials to meet the needs of the most demanding Vespa enthusiasts
Aluminum cylinder with Nikasil coating by Gilardoni
Bore diameter 69mm, 7 ports, fits both 57mm and 60mm stroke with the included spacers
Phases: intake ~118°, exhaust ~176°
Two-ring aluminum alloy piston with bi-conical pin
Aluminum head with radial fins for better cooling, with recessed squish band and 8 fixing points plus Viton O-ring
Central spark plug for better combustion
Cylinder gasket kit in complete paper with various aluminum spacers for head and cylinder base to mount the cylinder in both 57 and 60mm stroke and choose the best timing for your engine
Zinc-plated steel exhaust manifold screwed to the cylinder with Viton O-ring gasket.
The cylinder
Complete thermal group Quattrini M1L 60 version S 60x51 for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Kit screws and washers for fixing the headlight frame for Vespa 125 VNA/VNB-150 VBA/VBB/GL-160 GS/180 SS
Vespa 125 VN2T
Vespa 125 VNA1T>VNA2T
VESPA 125 VNB1T>VNB6T
Vespa 125 GT VNL1>2T
VESPA 150 VL2T 48301>
VESPA 150 VL3T
VESPA 150 VB1T
VESPA 150 VBA1T
VESPA 150 VBB1T>VBB2T
VESPA 150 GL VLA1T
VESPA 150 GS VS1T>5T
Vespa 150 Sprint VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Finish: Nickel-plated
Complete Corteco oil seal kit cone 20 for Vespa 50/125 PK-XL-N-HP-FL
Vespa 50/125 PK
Ape 50
Including OR'ing, cone 20 mm
Spark plug cap for Vespa V1/V15/V30/VM/VN/VL/VB1T/VNB/VBB/GL/PX/Sprint/Rally
Vespa 98
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Vespa PX
Vespa PE
Battery support pad for Vespa 125 VNA/VNB/GTR/Super/TS/150 VBA/VBB/VL/VB/GL/VGLA/Sprint/V/Super/GS/180 Rally/180-200 Rally also suitable for Vespa P125-150X/P200E/PX125-200E
Vespa 125 VNB1T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 GL VLA1T
DELL'ORTO air/fuel mixture screw for UB23 S carburetor Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
DELL'ORTO E21 floating needle for UB23 S carburetor Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
Cone pin clip of Orto MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Mounting and dismounting tool cross -BGM PRO- for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The BGM PRO ball crimping tool is an intelligently designed tool. It can be used to easily and conveniently install the gear balls with the spring in the main shaft of Vespa Smallframe engines.
Easy disassembly/assembly of gear balls
The gear balls are held firmly in place
The main shaft is held by the tool - both hands free to mount the gear lever
100% made in Germany
Without this tool, assembling the gear claw is a real game of patience. How do you position and sufficiently preload the balls on both sides at the same time without the gear spring shooting them into the infinite expanse of the workshop? It's not uncommon for the balls to simply disappear and you need new ones, of course exactly on a weekend...
With the BGM PRO tool, the job is done in no time. The whole process is so enjoyable that you want to do it over and over again. Simply because it is so nice... Indispensable in every Vespa workshop.
BGM Pro RACING full circle crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm
Stroke 51 rod 97
flywheel side bearing: 25mm
flywheel side oil seal: 24mm
flywheels:
87mm flywheel side
86mm pinion side
cases to be bored
Trolley extension for motorcycle mover (rear wheel) -BGM PRO- Vespa Smallframe/Largeframe/Wideframe V50-V90-ET3-PK-PX-T5-Rally-Sprint-GT-GTR-SS180-GL-Super-GS160-VNA-VNB-VBA-VBB-V1-V15-V30-V33
Vespa Smallframe, largeframe, wideframe
Brilliant extension for maneuvering assistance by BGM PRO for all classic
Vespa and Lambretta scooters. With the addition for the rear wheel, the
vehicle can be turned on the spot. This way, the scooter can be stored
well and safely even in the smallest corner and can be easily removed
again. All this without any effort.
Grease Gun -NORMFEST- Lever grease gun for 400g or 500g cartridges and bulk grease
Vespa PX (all)
Vespa PE (all)
In black rubber Fixing: Adhesive
Complete clutch assembly for Vespa 50/90/125 Primavera ET3-PK/S/XL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Vespa 125 PK ETS VMS1T
Composed of 3 cork discs + 2 steel discs
Complete clutch (7-disc modification) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa 50 FL/FL2/HP/N
Vespa 125 FL/FL2/HP/N
4 Cork discs + 3 in steel
Complete silent block with steel tube for Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Vespa PX (1983), Rally, TS, Sprint, Sprint Veloce, GT, GTR, Super, GL, V50, PV, ET3
Silent block--> 35x30x14mm
Tube--> 44x15x9.3mm
Tool for assembling cruciform gear selector balls for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50/90/125 Primavera ET3
Elastic support for shock absorber for Vespa 50/90/125/150/200 PX-PE-Sprint-GT-GTR-TS
Vespa 50, Vespa 90, Vespa 125 from 1958, Vespa 150 from 1958 (excluding Vespa 150 GS), Vespa 160, Vespa 180, Vespa 200
Rear wheel drum RMS Classic for Vespa 50 Special V5B1>4T/125 Primavera ET3
Vespa 50 Special V5B1T>3T
Vespa 90 SS V9SS1T>2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Complete electrical system from stator to bt socket (7-wire version) for Vespa 125/150/200 PX Arcobaleno with electric start
Vespa 125/150/200/PX Arcobaleno With electric start
Vespa 50/90/125 Primavera ET3
a=12.0mm
2 notches
Ø (internal) 25mm, (external) 34mm, left-hand thread
Rivet setting tool set Ø=2mm, 3mm, 4mm, 5mm, 6mm for rivets according to DIN 660
Cable grommet on the body side glove box/left hood for Vespa 125 Primavera ET3/PX-150 PX-200PE-Arcobaleno
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK XL-RUSH
Engine wheel oil seal kit ø 27 in FKM plus PTFE for Vespa 125/150/200 PX-TS-GTR-Sprint Veloce
Vespa PX 80 E V8X1T >100000
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139 >
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >87953
Vespa 150 Super 412374 >
Vespa 150 PX VLX1T >455339
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 200 RALLY 0033997 >
Vespa 200 PE >153347
Rear hub oil seal: 27
Gasket between the rear right/left indicator and light body for Vespa 80/125/150/200 PX-PE
Vespa PX 80 E Rainbow
Vespa PX 80
Vespa PX 100
Vespa PX 100 E Rainbow
Vespa P 125 X
Vespa P 125 X E
Vespa PX 125 E Rainbow
Vespa P 125/ETS
Vespa PX 125/TS
Vespa P 150 X
Vespa PX 150 E
Vespa PX 150 E Rainbow
Vespa P 200 E
Vespa PX 200 E
Vespa PX 200 E Rainbow
Front gasket 108 Project between indicator and light body DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Vespa 125 PK S VAM1T Automatic
Front Siem gasket between indicator and shield DX/SX for Vespa PX80-200/PE/Lusso/T5 Classic
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Vespa 125 PK S VAM1T Automatic
Electronic ignition EVOK flywheel made from solid (cone 20 kg.1.4) for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance Ø20mm cone. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the weights of the same are made from solid material and are perfectly balanced and galvanized. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - 1400g flywheel - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit 7 plus sales - Plug and play, everything necessary for assembly is included - Excellent quality and long-term reliability - Return and extended warranty to 24 months - 24-hour WhatsApp toll-free number for assistance and consultation for specific adjustments on request - Fan color gray as original to avoid problems during revision or historical register registration - Inclination notches for advance registration - Rotor approximately 1.4kg, for +30% extension.
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Electronic ignition EVOK cone 17 for Vespa 125/150 VBA-VBB-VNB-Sprint-GT-GTR-
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Each kit is equipped with everything necessary for assembly - 1400g flywheel - Upgraded cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil mounting plate - Spark plug cap - Small parts kit
Vespa 50 V5A1T 236001>283299
Vespa 50 V5A1T 580001>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>2T
Vespa 50 Special V5B3T>207316
Vespa 50 Special V5B4T
Vespa 50 V5SA1T 34201> V5SS2T
Vespa 90 V9A1T 31301>
Vespa 90 V9SS2T
Vespa 125 GT 62685>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA2T 028960>
Vespa 125 Primavera ET3 VMB1T > 44965
Vespa 150 Super VBC1T 73780>
Vespa 150 Sprint VLB1T 077175
Long model with 4 mm guide
Brand: Zadi
Metal keys