Classic Vespa
Fast Gas FRT for SHB-SHBC carburetor for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3-PK
Polini intake manifold fixing bolt M6x48mm for Vespa 50/125 N-L-R/Special/PK-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Fabbri Racing "MOWER" crankshaft with Primatist rod, full cheeks 83mm, taper 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
The use of a crankshaft with 83 mm shoulders does not require boring of the engine cases.
Fabbri Racing recommends using a 6204 bearing instead of the 6303 on the transmission side, paired with a specific oil seal with dimensions of 27x47x6 mm.
Bearings and oil seals are not included in the kit and must be purchased separately.
The recommended balance factor for pistons with a diameter between 57 and 60 mm is between 45 and 50.
Technical specifications:
Flywheel side bearing seat diameter: 20 mm
Clutch side bearing seat diameter: 20 mm
Flywheel side oil seal seat diameter: 20 mm
Clutch side oil seal seat diameter: 27 mm
Weight: approximately 1.4 kg
Driven clutch disc 2mm for Vespa PX125/150/200 '95->/'98/โMY/โ'11/โCosa 2
Vespa PX125/150/200 '95->/โ'98/โMY/โ'11/โCosa 2
ร 108 mm
18 teeth
thickness 2.0mm
VESPA PX 125/150 (2011-2017)
12-coil stator, round 4-wire connector.
Evok LED headlight/lamp holder for Vespa 50 PK S/Elestart/Automatica
Vespa PK 50
Vespa PK 50 S
Vespa PK 50 S Automatic
Vespa badge for Vespa PX '98/โMY side panel for Vespa ET2/โET4 50-150ccm
Vespa PX disc brake
In aluminum, fastening with 2 pegs
177x60 mm
hole spacing: 137mm
Vespa Badge for Vespa 150 Sprint/โV VLB1T -> 0172650/โSuper VBC1T -> 216812/โ180 Rally/Vespa 125 VNB6T 3350 ->
Vespa 125 VNB6T 3350>
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 Rally VSD1T
Polished
Aluminum
Hole center distance: 107mm
LML 125-150-200 Start 4T
Height: 44 mm
Shock absorber mount M9
Frame mount M10
BOSCH BATTERY FA1030 Factory Activated (AGM) 12V 9AH YB9-B for Vespa 125/150/200 PX-PE-Arcobaleno
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa PX disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Dimensions-->132x72x138 mm
Battery Bosch FA1030, code YB9-B.
.
BOSCH BATTERY M4 F25 12V 9AH YB9-B STARTING POWER 85A Vespa 125/150/200 PX-PE-Arcobaleno
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa PX disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Dimensions-->132x72x138 mm
Battery Bosch M4F25, code YB9-B.
The battery is supplied with a device containing pre-dosed acid for safe initial filling: it is therefore quickly ready for use and everything is included.
BOSCH Battery B49-6 complete with acid for Vespa GS 160-180 SS -150 VL2T
Vespa GS 160 VSB1T Vespa180 SS VSC1T Vespa 150 VL2T
Dimensions: 80x90xh160(mm)
Symmetrical dual-light lamp (KRYPTON GAS) intense white light 12V 35/35W base: BA20d
Base: ba20d
Intense white light
SIP tool for disassembly/assembly of gear shaft ring for Vespa 150 VB1T/GS VS1>5T
SIP tool for disassembly/reassembly of gear shaft ring for Vespa125 V1>15/โV30>33T/โHoffmann HA/โHB/โVM/โVN/โ150VL1-APE A1-15T/โAB1-2T
Vespa125 V1>15/โV30>33T/โHoffmann HA/โHB/โVM/โVN/โ150VL1-APE A1-15T/โAB1-2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 GL VGL1T
Vespa 150 GS VS1>5T
APE 150 AB2M 18999>
AB3T
AB4T
AC1T> AC3T
AC4M> 29023
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 200 Cosa VSR1T
Pair of footrests for Vespa 125 VNA/VNB1-2T ->09000/150 VL3/VB/VBA/VBB1T->17450/GS VS2-5
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1>2T > 09000
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T> 17450
Vespa 150 GS VS2T > VS5T
In rubber
Bronze bushing gear selector shaft SIP 32x27.5x8.9 mm for Vespa 125 VN/150 GS VS1-5/VL/VB/GL/VGL/ACMA GL
Vespa 125 VN/โ150 GS VS1-5/โVL/โVB/โGL/โVGL/โACMA GL
VN1T 06001 ->
standard nominal dimensions, plug and play in combination with a NEW crankshaft
Vespa 150 GS VS1T
Vespa 150 GS VS2T
Vespa 150 GS VS3T
Vespa 150 GS VS4T
Vespa 150 GS VS5T
Length-->53 cm
Vespa 125 VNA1>2T
Rear drum brake flange Sip "road" for Vespa 125 VNB3-6T/โ150 VBB1T 71001-
Vespa 125 VNB3T
Vespa 125 VNB4T
Vespa 125 VNB5T
Vespa 125 VNB6T
Vespa 150 VBB1 71001>
Vespa 150 VBB2T
M10x16mm
4 holes
toothing: coarse
Drum door flange Sip "sport" rear for Vespa 125 VNB3-6T/โ150 VBB1T 71001-VBB2T
Vespa 125 VNB3T
Vespa 125 VNB4T
Vespa 125 VNB5T
Vespa 125 VNB6T
Vespa 150 VBB1 71001>
Vespa 150 VBB2T
M10x21.5mm
4 holes
toothing: coarse
Vespa 160 GS VSB1T > 0055506
Ignition coil support plate / CDI / voltage regulator -BGM Pro with helmet hook for Vespa 50-125/โPV/โET3
Vespa 50 N/L/R-Special
Vespa 125 Primavera-ET3
Vespa โPK50-125/โS/โXL/โXL2
Complete clutch assembly Z23 on 65 for Vespa PX150 E '95/'98/MY/Cosa 2
Vespa 125 PX VNX2T from 1995
Vespa 125 PX ZAPM74100 2T AC `11
Vespa 125 PX Cat ZAPM50100 2T AC `07
Vespa 150 PX ZAPM74200 2T AC `11
Vespa 150 PX Millenium VLX1T 2T AC `98
Composed of 4 cork discs + 3 steel discs
Helical Teeth: No. 23
Adaptable to all "3 button" helmets
Adaptable to all "3 button" helmets
Original Complete Headlight Group TRIOM for Vespa 125/150/200 PX New Model
Vespa 125/150 PX New Model
Brand: TRIOM
Mounts H$ bulb (not included)
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T (adaptable)
Vespa 150 VL1>3T
Fastening with screws
Accessory NOT standard
All models registered until December 1998
In Metal, dimensions 170x170 mm
Rectangular chrome headlight frame for Vespa 50 Special/Elestart
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 125 VNB1>5T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VGLA1T
Vespa 150 GL VGLB1T
Vespa 150 GL VLA1T
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX
Vespa PX Arcobaleno series
Economy Version
l=230 mm
l=150 mm
a=140 mm
black
Vespa 125 VNA1>2T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
By clicking on purchase, all available sizes will be displayed
Length-->80.5mm
Pin-->16x54x11mm
Compression-->42.5
SIP Classic spare wheel bag in brown beige RAL 1011 for 10'' open rim and 8'' closed spare wheels
Practical multi-pocket bag
Mounting on spare wheel for 8 and 10 inch wheels
Vespa 125 VNB3>6T
Vespa 150 VBB1T 71001>
Vespa 150 VBB2T