Classic Vespa
Vespa 125/150/160/180/200 All from 1958 /All 1958>
Finish: Galvanized
Ref.orig 08294 (Dell'Orto)
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Muffler with DGM Piaggio 4109S for Vespa 50 S V5SA1T Vespa 90 V9A1T Vespa 125 Primavera VMA1T
Vespa 50 S V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
While supplies last.
Painted/oiled based on supply
MEN's black T-shirt with Go Vespa graphic
Material: 100% Cotton
Weight: 160 gr
Packaged in a transparent PVC tube.
Parmakit CHALLENGER Exhaust - Vespa ET3 Wheels 3.50 - 10 inches
VESPA SPECIAL - ET3 - PRIMAVERA - PK 50-125
Adaptable to thermal groups:
- CHALLENGER Lamellar to the cylinder
- ECV suction to the crankcase
- Wheels 3.50 - 10 inches
Malossi VR-ONE crankcase reed valve for Vespa 125/150 GT-TS-Sprint-GL-PX
Vespa 125/150 GT-TS-Sprint-GL-PX
The V-One is designed for those who want a perfectly
replaceable casing to the original, supplied with all the necessary components
for assembly and that allows maximum interchangeability with the
components available on the market, it does not require any aesthetic modification
of the vehicle and fits all original Piaggio parts
The bearing seats are designed to accept the original crankshaft bearings and seals (not supplied). V-One can be mounted with the
original Dell’Orto Si 24-24 carburetor. It is possible to use
the original crankshaft or our rotary valve crankshaft with a 57mm stroke art. 5316082. Whatever the choice,
the fuel system has been revised and enhanced thanks to our
modern CAD systems that have profiled an optimized intake duct in the casing. Entirely made in ITALY
Chrome wheel hubcap 10" open type - Vespa V50, V90, PV125, ET3, PK, GT, GTR, TS, GL, GS VS5T, Sprint, T4, Rally, PX, T5
All models with wheels 3.00x10/ 3.50x10
Complete light with original SIEM reflector for Vespa 125 PK S / Automatic / Elestart
Vespa PK 80-100-125-125/ S automatic
All models / Tutti i modelli
Useful for regulating voltage fluctuations in light bulbs
Reinforced Clutch Spring for Vespa 50-125/Primavera/ET3/PK50-125/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
HEIGHT mm. 50
Vespa 50 PK XL
Vespa 125 PK XL
Vespa 50 PK N V5X5T
Black
Rubber
Upper steering bearing group Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Vespa 125/150/200 Cosa
Complete
Vespa 80/125/150 PX Rainbow
Composed of 3 cork discs + 2 steel discs
Z 26 to Z 20
User and Maintenance Manual for Vespa 125/150 Super VNC1T-VBC1T from 1965
Vespa 125/150 Super VNC1T-VBC1T from 1965
Vespa GS 150 VS1>5T
In ground steel
Light switch for Vespa 90/125/150/180 Primavera-GT-GTR-VNB-VBB-Sprint-S fast-Rally
Vespa 90 V9A1T
Vespa 90 V9SS1>2T
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 125 GT VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA1T>2T
Vespa 150 VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 SS VSCT (without battery)
Vespa 180 Rally VSD1T
3 positions
Chrome
Only for models without battery
Complete optical group with frame SIEM for Vespa 125/150/180/200 GTR-TS-SPRINT VELOCE-RALLY
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Transparent glass
Original SIEM
Vespa 50 V5A1T 49126 >
With aluminum bezel and Original SIEM luminous body
Gray gasket
SKF wheel drum bearing 15X35X11mm for Vespa PK/S/XL/XL2/PX Lusso/'98/T5/Cosa
Vespa PX 125 VNX2T 1116>
PX 150 VLX1T 346431>
P200E VSX1T 112625>
SKF
15X35X11 mm
SKF shielded wheel drum bearing 15X35X11mm for Vespa PK/S/XL/XL2/PX Lusso/'98/T5/Cosa
Vespa PX 125 VNX2T 1116>
PX 150 VLX1T 346431>
P200E VSX1T 112625>
SKF
15X35X11 mm
Shielded
Pair of right and left side panels for Vespa 160 GS VSB1T
Vespa 160 GS VSB1T
Raw finish
All Models / Tutti i modelli
Vespa 150 GS VS1>5T
Length: 50 cm
Vespa 150 GS VS1>5T
Rubber profile for strips (Kit for a Vespa) for Vespa 125-150 VBA/VBB/GL7TS/GT/GTR/Sprint/160 GS/180SS/Rally-200 Rally
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Pair of plates under the handlebar for Vespa 125/150/180 GTR-Sprint V-Rally
Vespa 125/150/180 GTR-Sprint V-Rally
VNL2T >111248 - VLB1T 124134> - VSD1T >016118
SIP thrust washer clutch group 34.0x15.2x3.4 mm for Vespa 125 GTR 2°/TS 2°/150 Sprint v 2°/Super 2°/Rally-PX-PE-Lusso-T5 without mix
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T 412374>
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 125/150/200 PX
Vespa 125 T5 VNX5T
Measurements:
34.0x15.2x3.4 mm
Vespa PX 80 E V8X1T 3000997>
Vespa 125 PX E Arcobaleno Elestart VNX2T 280359>
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa PX 150 E Arcobaleno Elestart VLX1T 711688>
Vespa 150 Cosa VLR1T
Vespa 150 Cosa 2 VLR2T
Vespa 150 PX VLX1T Millennium '98
Vespa 150 PX 2011 ZAPM74200
Vespa PX 200 E Arcobaleno Elest
For models with inner hub oil seal
Outer diameter: 48 mm
Inner diameter: 32 mm
Bosatta optical group with plastic lens for Vespa 125 PX T5 VNX5T
Vespa 125 PX T5 VNX5T
high beam & low beam bulb holder: P45t
Vespa 50 PK
Vespa 125 PK
Hub oil seal insertion diameter: 27mm
Thing 125 VNR1T
Thing 2 125 VNR2T
Thing 150 VLR1T
Thing 2 150 VLR2T
Thing 200 VSR1T
Hub oil seal fitting diameter: 31.5 mm
Manufacturer: FA ITALIA
Galvanized gear selector cover for Vespa 125 GTR 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Cosa
Vespa 125 GTR 151593>
Vespa 125 PX from 1982
Vespa 150 Super 544507>
Vespa 150 Sprint Veloce 0367322>
Vespa 150 PX from 1982
Vespa 200 Rally 041648>
Vespa 200 PE from 1982
In galvanized metal.
Vespa 125 VNA1>2T
Vespa 125 VNB1>VNB4T
Vespa 150 VBA1T
Vespa 150 GL VGLA1T
In Aluminum, For 3-speed models.
Manufacturer: FA ITALIA
Vespa Cosa CLX 125
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Finishing treatment like the era
Vespa 150 GS VS2T>5T
Finishing treatment as the era
Vespa 150 GS VS1T
Finishing treatment like the era
Bushing on crankcase kickstart sector for Vespa 125 V1-15/V30-33/VM/VN/ACMA/150 VB/VL/VGL/GS also suitable for APE A1-15T/AB1
Vespa 125 V30>33T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 GS VS1T>5T
Vespa 150 GL VGL1T
Material: Steel
Intake manifold gasket for Vespa 50/90/125/Primavera/ET3/PK50/S/SS/80-125/S/Elestart
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera VMA1T>2T