Classic Vespa
Crimaz clutch bell with double spring seat for Vespa 50/90/125 Primavera ET3-PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Born for drag racing, it optimizes the clutch operation both in release and grip.
The 2 support planes for the springs ensure that the clutch plates descend performing the correct movement.
Completely reinforced at critical points, it is made from solid high-strength steel. Designed for central spring clutches/double central spring.
Compatible with original clutch and extractor.
Crimaz intake closure cap on Quattrini Vespa V50/V90/SS50/SS90/125- ET3/PK S/PK XL engine casing
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The suction cap is made of stainless steel with a thickness of 1mm. It is manufactured through laser cutting and subsequent laser marking. Useful for protecting the luggage compartment from dirt when not in use. Included are no. 4 white zinc plated T.B.E.I M6x6 screws with locking coating.
Extra short intake manifold for GT reed valve Quattrini or DEA Racing for Vespa 50/125 Special-N-L-R-ET3
The intake manifold, machined from solid, is provided already worked and ready to be installed. The reduced length and the particular taper of the duct improve the engine's response across the entire power range. Ideal for VHSB 34 LD carburetor or alternatively carburetors with a 44mm diameter connection. Compatible with all QUATTRINI reed valve cylinders for Vespa Smallframe.
Born for the track, it anchors to the engine casing on the engine pillar.
It comes with 2 anti-vibration mounts to be fixed on the bracket slots, and 2
raw sheet metal plates to be welded onto the exhaust in the ideal position.
Its total adjustability allows the exhaust to be positioned without tension, preventing it from breaking. Made of galvanized steel.
Rear caliper replacement Crimaz (caliper only) for Vespa 50/90/125 Primavera ET3/PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Rear brake disc Crimaz complete with screws (disc only) for Vespa 50/90/125 Primavera ET3/PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Diameter 155mm
Crimaz gold brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/ยด98 /MY/ยด11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/ยด98/MY/ยด11/T5
Crimaz black brake pads replacement for Vespa 50Special-125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/ยด98 /MY/ยด11/T5
Vespa 50 Special-N-L-R
Vespa 125 ET3/GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/ยด98/MY/ยด11/T5
Complete clutch Cm Easy4r for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Withstands +20hp
Supplied with CRIMAZ multispring
Multi spring 8 springs Crimaz for Vespa 50/90/125 Specia-N-L-R-Primavera ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Compatible with original small frame clutches, CM EASY clutch, CM4, CM5
Crimaz type cross with thread for Vespa VNB - VBB - TS - GL - GT - SPRINT - SPRINT V
Vespa 125 VNB1>5T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 VBB2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Crimaz clutch gear Z23/63 without plate for Malossi 63/24 ratios Vespa 200 Rally/PE
Vespa 200 Rally/PE
Reinforced Crimaz key kits for Vespa 125/150/180/200 VM/VN/VL/VB1T/VNB/VBB/GT/GL/GTR/Sprint/TS/PX/PE/Cosa/Rally
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VU1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 ts VNL3T
Vespa 125 PX VNX1T> 2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa
Measurements: 4x15.4 mm
Crimaz reinforced square section shock absorber spring for Vespa 25 GT/GTR/Super VNC1T 11001-
Vespa 25 GT/GTR/Super VNC1T 11001->/TS/150 GL /Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso /Cosa/T5
dimensions--> d. 12mm x L. 32mm
Clutch disc driven Crimaz in metal for Vespa 180 Rally-200 PX/PE/Rally/Cosa
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1T
Thickness: 2 mm, tempered material
Crimaz rear disc brake kit for Vespa Vespa 125 GT/GTR/TS/150 Sprint/V/GL/P150S /Rally/PX80-200/PE/Lusso/ยด98 /MY/ยด11/T5
Vespa 125 GT/GTR/Super/TS/150 GL/Sprint/V/Super/P150S/Rally/PX80-200/PE/Lusso/ยด98/MY/ยด11/T5
Primary transmission gear pinion 28 Teeth (28-69) for Vespa 50-90-125 Primavera/ET3/PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Fits perfectly on bell 27-69, complete with washer and nut
Complete clutch Crimaz CMX Vespa 125/150/200 Sprint-S.Veloce-GT-GTR-TS-PX-PE
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
The CMX is defined as a turned clutch because the basket is integral with the gear (pinion). This technical choice allows the basket (commonly known as the
bell) to remain stationary when the clutch is pulled (clutch disengagement).
Thanks to this reversal of moving parts, the clutch
becomes much more progressive in the initial thrust phase of the Vespa
minimizing any annoying jerks at start-up
(a problem known to old-design clutches). This precaution,
together with the significant contact points of the lined discs and conducting discs,
makes the CMX an ideal clutch for engines with power
greater than 15 hp, avoiding premature wear caused by the
hammering of the contact parts.
Vespa 125 VNB1T > VNB6T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 PX
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
In laser-cut steel
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
In galvanized metal.
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Silent Blocks specifically created to eliminate the elastic effect that we feel on traditional models, all supported by 2 bearings held in place by an acetal resin bushing.
The attachment to the frame is done with two M10 bolts.
Vespa 125 PX VNX2T 232053>
Vespa 150 PX 624302>
Vespa 200 PE VSX1T 315267>
Crimaz CM EASY Clutch (20hp) for Vespa 50 N/L/R-Special-125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Carbon look gear selector cover for Vespa 125 GTR 2ยฐ/150 Sprint V 2ยฐ/Super 2ยฐ/200 Rally 2ยฐ/PX80-200/PE/Lusso/Cosa
Vespa 125 GTR 151593>
Vespa 125 PX from 1982
Vespa 150 Super 544507>
Vespa 150 Sprint Veloce 0367322>
Vespa 150 PX from 1982
Vespa 200 Rally 041648>
Vespa 200 PE from 1982
Glossy finish
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Single seat, spring base, without lock
100% MADE IN ITALY
Economy version
Gear without specific pressure plate for Crimaz CMX Z22 clutches on 67/68 for Vespa P80-150X/PX80-150 E/Lusso/'98/MY/'11/Cosa 125
Vespa P80-150X/โPX80-150 E/โLusso/โ'98/โMY/โ'11/โCosa 125-200/โT5
125/150/200 PX My
Vespa 80/125/150/200 PX PE All
Manufacturer: FACO
Vespa 50 V5A2T > V5A3T
Vespa 50 V5B1T> 38699
Vespa 50 V5B2T> 1868
In polished aluminum, rung spacing-->16mm
Vespa PE 200
Vespa 200 Rally VSE1T
Vespa 200 Cosa
Malossi power exhaust has been redesigned, increasing the power
compared to previous models by about 5%, thanks to an in-depth
study that involved the internal surfaces of the sheet metal with which the
expansion is made.
Painted in black
White rubber mat for Vespa 80/125/150/200 PX-PE-Arcobaleno
Vespa PX
Vespa PE
Vespa 125 VNB3T>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 VBB1>2T
Vespa 150 PX VLX1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Very spacious (about 9.5 liters)
Raw finish
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 V1>15T
Complete fuel tap for Vespa V98T 8200> - V1T - V11T - V12T - V13T - V14T - V15T
Vespa V98T 8200> - V1T - V11T - V12T - V13T - V14T - V15T
Body to be welded to the tank
Viton rubber kit
Chromed rod
Brass spacers
Attachment assembly instructions
Collection of 8 assorted adhesive labels with Vespa communication logos and images.
Vespa 50/90/125/150/160/180/200