Classic Vespa
Black painted wheel hubcap 10" open type - Vespa V50, V90, PV125, ET3, PK, GT, GTR, TS, GL, GS VS5T, Sprint, T4, Rally, PX, T5
All models with wheels 3.00x10/ 3.50x10
Vespa 50 PK V5X1>2T
Vespa 50 PK XL V5X3T
Vespa 50 PK Rush V5X4T
Vespa 50 PK N V5X5T
Vespa 50 PK FL2 V5X5T
Vespa 50 PK HP
Included: cylinder fitting with gasket
Finish: Painted
Carburetor jet reamer tool with 12 reamers (from 0.6 to 1.9 mm)
All models
Switch replacement lever and screw for Vespa 125/150 VNA-VNB-VBA-VB1
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 150 VB1T
Vespa 150 VBA1T> 76049
ROLF engine oil seal KIT for Vespa 125 VNB/GT/GTR/Super-150 VBA/VBB/GL/Sprint/Super
Vespa 125 VNB1T > VNB6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T >145900
Vespa 125 TS VNL3T >18138
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T >294259
Vespa 150 VBB1T > VBB2T
Vespa 150 VBA1T
Vespa 150 GL VLA1T
KIT COMPOSED OF:
N.1 ROLF OIL SEAL 20x62x6.5 CLUTCH SIDE
N.1 ROLF OIL SEAL 20x40x6 FLYWHEEL SIDE
N.1 CORTECO OIL SEAL (27X37X7) REAR WHEEL
+ O-RINGS
Proma exhaust manifold for Vespa 125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
AGM Battery 6V-1.3 Ah for Backup Use Digital Odometer-Various for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/160/180/200
TECHNOLOGY: AGM
VOLTAGE: 6AH 1.3
WEIGHT: 0.32
LENGTH: (MM) 97
WIDTH: (MM) 24
HEIGHT: (MM) 52
TOTAL HEIGHT: 58
TERMINAL: F1
AGM Battery 12V-0.8 Ah for buffer use Digital Odometer-Various for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/160/180/200
TECHNOLOGY: AGM
VOLTAGE: 12AH0.8
WEIGHT: 0.34
LENGTH (MM) 96
WIDTH (MM) 25
HEIGHT (MM) 61
TOTAL HEIGHT 61
TERMINAL: Spec.
Malossi "Vespower" Voltage Regulator 12V AC/DC for Malossi Electronic Ignitions
Complete SURFLEX clutch modification to 4 discs for VESPA 125 150 PX PE
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T > VNX2T
Vespa 150 Super VNC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX 150 E VLX1T > VLX2T
Vespa 200 PE VSX1T
By clicking on purchase, all available sizes will be displayed
Vespa PX 80 E V8X1T
Vespa PX 125 T5 VNX5T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 150 PX VLX1T Millennium '98
Vespa 150 PX 2011 ZAPM74200
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Length--> 165 mm
Original front optical group Piaggio for Vespa 125/150/200 PX Arcobaleno
Vespa 125/150/200 PX Rainbow
Complete starter transmission for Vespa 125 VNB1T/150 VBA1T/VBB1T/160 GS VSB1T/180SS VSC1T
Vespa 125 VNB1T
Vespa 150 VBA1T
Vespa 150 VBB1T >31000
Vespa 160 GS VSB1T
Vespa 180SS VSC1T
Central stand relocation MRP for Vespa PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa PX80-200/PE/Lusso/'98/MY/'11/T5
For all exhausts that obstruct the central stand
Internal luggage rack shield 108 Project for Vespa 98/125/150 V1-15/V30-33/VM/VN/VL
Vespa 98
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 Special Elestart
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Feet
20 mm
Black
All up to the PX model / All Models >PX
Includes Tie Rods and Pads for Fixing
Manufacturer: FACO (100% made in Italy)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Painted in black, Aluminum Silencer
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B3T
Vespa 50 PK S /XL
Vespa 50 SS V5SS1T
Vespa 90 V9A1T
Vespa VNSS1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S /XL
7-disc modification with spring
Transmission lever command for side door opening for Vespa 50/125 PK XL-N-HP-FL
Vespa 50 PK XL/FL/HP/N Automatic
Vespa 125 PK XL/N Automatic
Vespa 98
Vespa 125 from '48 to '65
Vespa 150 from '54 to '66
Size:3.50-8 Load index: 53P TL/TT reinforced-150Km/H
Pinasco "Zuerino" SVR Thermal Group (102cc) for Vespa 50 PK (manifold Ø19-19)
50 HP
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 with a 43mm stroke.
Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to its bigger brother, uses the same RD350 type reed valve pack and the same flow guide, mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a copious engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and stamped mufflers
commonly called "bananas" but can also be used in
more advanced setups.
It does not require special modifications to the engine case, it can be used with
all crankshafts on the market including the original ones, its
installation allows the use of engine
SMC carbon air intake fan cover for Vespa 50 N/L/R-Special-125 Primavera ET3
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Clutch gear group Z21 on primary Z67/68 for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. It is also possible to mount it on primary 65 teeth DRT.
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 125 PX T5 VNXST
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 50/90/125 Primavera ET3
Material: Aluminum
Application: Carburetors 22/24
Total length: 120mm
Screw with spring for air mixture adjustment screw Vespa V50/90/100/125/PV/ET3/PK50/S/SS/XL/125XL/ETS/N/XL2/Elestart
For carburetors SHB 16.10/15/16/F, SHBC19.19/20L
Screw with spring for idle adjustment screw VHSB Vespa V50/90/100/125/PV/ET3/PK50/S/SS/X
For VHSB carburetors
Nickel-plated front suspension spring for Vespa 125 Bacchetta V1-15T
Vespa 125 V1-15T/VU/Hoffmann A/B
Height--> 157 mm
Electric cable with Red silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with Blue silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUIVALENT TO 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with White silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electrical cable with Yellow silicone-rubber coating for stator restoration and various uses.
All models/All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electric cable with Gray silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resistant to temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Electrical cable with Brown silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUALS 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm
Stator wire restoration kit for Vespa 125/150/200 PX-PE without electric start
Vespa 125 PX VNX2T
Vespa 150 VLX1T
Vespa PX 200E VSX1T
Rainbow Series
Silicone-rubber wires resistant to temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm, cut to size: white, red, green, blue, black
Complete kit of: Wires, faston, insulating sheath, and cable tie.
Electric cable with Black silicone-rubber coating for stator restoration and various uses.
All Models
Note: EACH QUANTITY EQUIVALENT TO 0.5 METERS.
Resists temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm