Classic Vespa
BGM Pro Clutch Gear - Pro Superstrong Z 22 for 64/65 Tooth Cush Drive Gear Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Developed for the high performance and torque of today's engines, they are made of highly alloyed steel (SCM415/15 CrMo 5), in compliance with the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) is a reliable foundation for the production of BGM sprockets.
The production meets the high standards in place for Honda gear manufacturing. Each individual piece is accompanied by a test report, allowing BGM to have continuous and lasting quality assurance.
High-quality material 15 CrMo 5
Precise production according to Honda standards
Continuous quality controls
Compatible with COSA2 clutches
Available with 22, 23, and 24 teeth
Compatible with the original primary of all 200 c.c. engines
Compatible with engines with original primary retrofitted with 65 teeth or with BGM primary with 64/65 teeth
Elegant metal box.
Optical group with lamp holder for Vespa 80/125/150/200 PX-PE-Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa P 150 X
Vespa PX 150 E
Vespa PX 150 E Arcobaleno
Vespa P 200 E
Vespa PX 200 E
Vespa PX 200 E Arcobaleno
3-Light Lamp Holder
Transparent Plastic
Diameter: 140 mm
DAYCO belt for PK 50/125 AUTOMATIC from 1984 to 1989 o.e. 198780
PK 50/125 AUTOMATIC from 1984 to 1989 o.e. 198780
Shift selector rod for Vespa PX80-200 E Lusso 2° /`98/MY/`11/T5/Cosa
Vespa 125 PX VNX2T 232053>Vespa 150 PX 624302>Vespa 200 PE VSX1T 315267>Vespa 200 Cosa VSR1T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Full of commands
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T >763500
Vespa 50 S V5SA1T
Vespa 50 Revival V5R1T
Vespa 50 Special V5A2T >60910
Vespa 50 Special V5B3T (A) GB)
Vespa 50 SS V5SS1T
Vespa 50 Sprinter V5SS2T
Hole center distance--> 58 mm
Anti-emulsion washer PHBH for Vespa 125/150 VNB-GT-GTR-TS-Sprint-Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Vespa 180 Rally
Vespa 200 PX
Pair of original SIEM luminous bodies (right and left) for Vespa 50/125 PK XL-N-Plurimatic-FL2-Rush
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa PK 50 N Speedmatic (FL1) from 1989
Vespa PK 50 FL2 from 1990
Vespa PK 50 Rush
Vespa 125 PK XL
Orange
Original SIEM
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK XL Rush
BFA threaded type cross for Vespa 125/150/200 Sprint v-TS-PX-PE-Rally engines
Vespa 125 GT VNL1>2T 78301>
Vespa 125 GTR VNL2T 124014>
Vespa 125 TS VNL3T
Vespa 125 PX VNX1T>2T > 232052
Vespa 150 Super VBC1T 181687>
Vespa 150 Sprint VLB1T 1.170240>
Vespa 150 Sprint Veloce VLB1T 0169301>
Vespa 150 PX VLX1T > 624301
Vespa 180 Rally VSD1T 0026849>
Vespa 200 Rally VSE1T 004476>
Vespa 200 PE VSX1T > 315266
Vespa 125 PX VNX2T 232053>
Vespa 150 PX 624302>
Vespa 200 PE VSX1T 315267>
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa 2 VLR2T
Vespa 200 Cosa 2 VSR1T
DRT Carburetor for SIP 26/26 MIX for Vespa 180 Rally/P80-150X/PX80-150 E/Lusso/'98/MY/T5/200
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200
Racing Version
Models with mixer
Vespa PX Millennium
Vespa PX Disc Brake
Diameter: 22 mm
Adaptable to all PX models
Complete thermal group FRT BFA lamellar to the cylinder 58x56.7 (150 cc)
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Biella 110
race 56.7
Expansion dedicated to thermal group FRT BFA reed valve on the cylinder 58x56.7 (150 cc)
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Carter BFA dedicated to FRT lamellar thermal group at cylinder 58x56.7 (150 cc)
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Black color. With HYDROSCUD® system, the registered Tucano Urbano system that ensures waterproofness and breathability. Equipped with touch screen compatibility, Barone gloves are made of genuine leather and are CE and Moto CE certified, equipped with CE D30 protections and have a thermal class of 4°.
- 100% genuine goat leather
- synthetic sheepskin lining
- microfiber lining on the palm for maximum sensitivity on controls
- HYDROSCUD: 100% waterproof and breathable internal membrane
- rigid inserts on the knuckles
- soft D30 insert on the palm
- padded inserts on the fingers
- long cut on the wrist
- side zipper on the wrist with snap button puller lock
- elastic anti-slip adjustment with snap on the wrist
- visor wiper insert
- touch screen compatibility
- motorcycle certified EN 13594:2015-CE
Teal color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
LAST SIZES AVAILABLE: XS-XL
The 109I is a helmet with minimal dimensions that allow it to
be stored even in reduced under-seat compartments, without compromising
on quality and safety.
LAST SIZES AVAILABLE: XS-XL
Technical Specifications:
Scratch-resistant paint with decal
Rear air extractors
Air Stream Inner perforated interiors
Removable chin guard
Shaped visor with scratch-resistant treatment
Shell with perimeter seal
Average weight size M gr. 920+-50 gr.
Outer shell made of thermoplastic material
Prestige hypoallergenic and antibacterial interiors
Removable and washable cheek pads
Retention system with micrometric buckle
Anti-theft ring on the strap
Gasket between crankcase and air filter box for Vespa 125/150/200 PX with MIX- Rally-COSA
Vespa 125/150/200 PX with Mix/with mix
Vespa 200 Rally VSE1T
Vespa 125/150 200 Cosa
Complete Reed Valve Engine Case 8X 2.0 for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
How many times have you been stranded with your Vespa due to the clutch side oil seal? How many times have you thrown up your hands in surrender because the oil seal slipped out of its seat? How many times have you damaged the bearing seat because of the extremely hard clutch springs and engine performance?
Pinasco, always seeking solutions to the most common problems of modified Vespas, offers a solution to this inconvenience by updating the clutch bank of its engine casing with the new 2.0 model.
Thanks to the new fastening system with 3 steel plates, the specific Pinasco oil seal is locked between the casing and the crankshaft bearing without the possibility of coming out of its seat. The plates ensure perfect registration of the bearing, eliminating the play that often forms between the circlip and bearing, and the safety clips ensure the total locking of the entire system.
The new bearing seat has been further reinforced with the addition of 3 new ribs that guarantee the support and holding of the entire engine bank, and 2 reinforcement ribs have been added on the cluster shaft.
The crank chamber is bored to accommodate crankshafts with increased shoulders.
The die-casting technique used for
Vespa 125 V30T>V33T
Vespa 125 VM1T>VM2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 GS VS1T Adaptable/Adaptable
Vespa 150 GS VS2T>VS5T
Disc brake lever fixing screw for "HENG TONG" brake pump for Vespa 125/150/200 PX disc brake
Vespa PX Arcobaleno disc brake
Vespa 200 PX-PE-Rally
Vespa 125/150 Super
Original complete Piaggio tap for Vespa 125/150/200 PX Arcobaleno-T5
Vespa PX Rainbow
Vespa PE Rainbow
Vespa PX 125 T5 VNX5T
Without reservation
Black and fluorescent yellow color. The Penna gloves are made of breathable fabric, equipped with knuckle protection and compatible with touch screens. The product is CE and Moto CE certified.
- Palm in synthetic suede fabric
- Back in stretch fabric with mesh inserts for greater ventilation
- Rigid inserts on the knuckles
- Padded inserts on the fingers
- Soft and abrasion-resistant inserts on the palm
- Elasticated inner fingers with mesh inserts for greater ventilation
- Silicone print on the back
- Neoprene cuff, with velcro adjustment and lycra gusset
- Motorcycle certified EN 13594:2015-CE
Black color. With HYDROSCUD® system, the registered Tucano Urbano system that ensures waterproofness and breathability. Equipped with touchscreen compatibility, the Baronessa gloves are made of genuine leather and are CE and Moto CE certified, equipped with CE D30 protections and have a thermal rating of class 4°.
- 100% genuine goat leather
- synthetic sheepskin lining
- microfiber lining on the palm for maximum sensitivity on controls
- HYDROSCUD: 100% waterproof and breathable inner membrane
- rigid inserts on the knuckles
- soft D30 insert on the palm
- padded inserts on fingers
- long cut on the wrist
- side zipper on the wrist with snap button pull-tab lock
- elastic anti-slip adjustment with snap on the wrist
- visor wiper insert
- touchscreen compatibility
- motorcycle certified EN 13594:2015-CE
Black color. Equipped with touchscreen compatibility and breathable fabric, the Gig gloves are CE and Moto CE certified and feature CE D30 protections.
- 100% genuine goat leather
- Soft D30 inserts on knuckles and palm
- Short cut on the wrist
- Velcro adjustment on the wrist
- Touchscreen compatibility
Burgundy red color. Equipped with touchscreen compatibility and breathable fabric, the Gig gloves are CE and Moto CE certified and come with CE D30 protections.
- 100% genuine goat leather
- Soft D30 inserts on knuckles and palm
- Short cut on the wrist
- Velcro adjustment on the wrist
- Touchscreen compatibility
Black color. Equipped with touchscreen compatibility and breathable fabric, the Miky gloves are CE and Moto CE certified.
- Synthetic suede palm
- Back in cotton-feel stretch fabric
- Padded inserts on fingers, knuckles, and back
- Abrasion-resistant insert on the palm
- Silicone print on the back
- Neoprene cuff
- Elastic adjustment with velcro on the wrist
- Touchscreen compatibility
- Motorcycle certificate EN 13594:2015-CE
Black color. Equipped with touchscreen compatibility, the Andrew gloves are made of genuine leather, CE certified and Moto CE.
- 100% genuine goat leather, perforated on the palm
- Perforated palm for maximum ventilation
- Soft protection on the palm
- Genuine goat leather inserts, perforated on the back and fingers
- Padded inserts on the back and fingers
- Accordion panels above the knuckles and on the back
- Elasticized inner fingers for maximum comfort
- Velcro adjustment on the wrist
- Motorcycle certificate EN 13594:2015-CE
Black color. Equipped with knuckle protection, comfort protection system, and touch screen compatibility. The Andrew gloves are made of genuine leather, are CE and Moto CE certified, and have a thermal class of 1°.
- Palm made of genuine goatskin leather, with micro holes and anti-abrasion inserts
- Back made of genuine goatskin leather, with cotton-like stretch fabric inserts
- Laminated interior with jersey
- Soft CPS homologated protection on knuckles
- Padded inserts on fingers
- Accordion panels above the phalanges and below the knuckles for maximum comfort
- Velcro adjustment on the wrist
- Perforated leather cuff
- Touch screen compatibility
- Motorcycle certified EN 13594:2015-CE
CE summer glove "LADY PENNA" black and red, synthetic suede palm
Black and red color. The Lady Penna gloves are made of breathable fabric, equipped with knuckle protection and touch screen compatible. The product is CE and Moto CE certified.
- Palm in synthetic suede fabric
- Back in stretch fabric with mesh inserts for better ventilation
- Rigid inserts on the knuckles
- Padded inserts on the fingers
- Soft and abrasion-resistant inserts on the palm
- Elasticated finger interior with mesh inserts for better ventilation
- Silicone print on the back
- Neoprene cuff, with velcro adjustment and lycra gusset
- Shaping on the back
- Motorcycle certified EN 13594:2015-CE