Classic Vespa
Vespa PX until 1983
Vespa PE until 1983
Complete with lamp holder
Vespa 125 V30T > V33T
Vespa 125 VM1T > VM2T
With Buttonholes, non-original color
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Aluminum
frame hole distance: 60mm
"RUSH" Split Rim in Metallic Gray Aluminum 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
O-ring kit for tubeless rim closure
Dimensions: 2.10x10''
Complete Polini piston (75cc) with a diameter of ø 47.00 for Vespa 50 Special-N-L-R-PK
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Vespa 50 V5A1T 49126 >
It mounts in place of the original lamp holder. Red LEDs, no battery needed (works in AC and DC both at 6v and 12v)
Speedometer drive gear 11 teeth square 2.7mm for Vespa 125 VNB5 033017>/VNB6/Super/150 VBB2 216001>/Super
Vespa Super
Various
11-tooth sprocket
Frame (2.7 mm)
Blue
All models
Vespa 180 Rally VSD1T 005256 >
Vespa 150 Sprint Veloce VLB1T 150001>
In rubber, black color
Nickel-plated suspension spring for Vespa 125 V30-33T/VM1T -> 85871/Hoffmann C
Vespa 125 V30>33T
Vespa 125 VM1>085870
L 155 mm
Base: ba15s
Intermittent support for Vespa P80-150X/PX80-200E/P200E/P150S/T5/Cosa
Vespa PX
Vespa PE
Rubber
Rear shock absorber washer (upper) Ø 9.3x37 mm thickness 1.5mm for Vespa 50/125 PK S-XL-N-HP-FL
Vespa 50/125 PK S-XL-N-HP-FL
Piaggio Bearing Crankshaft 25X62X12 mm (C4) for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 V30-TS/150 VL-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa
Flywheel side for Vespa 125 V30-TS 1°/150 VL-Super 1°
Measurements: 25x62x12 mm
Vespa 50 N/L/R V5A1T 49126 >
Vespa PX
Vespa PE
Vespa PX Rainbow
Vespa PE Rainbow
Vespa 50/90/125/150/180/200
M10x1.2 thread
Mirror size: 115x60mm
Pair of screws for air filter box attachment for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/Cosa (1)
Vespa 80 PX V8X1T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 T5 VNX5T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa PX 125 VNX1T> VNX2T> 1115 PX 150 VL1T> 346430 P200E VSX1T> 112624
Kit composed of:
- 01-DH-086-IR
- 01-AC-083-IR
- 01-BI-018-CI
- 01-DH-087-IR
- 07-CL-021-BA
- 01-AC-017-BA
- 01-CL-041-FA
- 01-BI-002-CI
- 01-BI-019-CI (2)
- 01-CL-048-IR
Vespa 150 VL2T
Specification for the Vespa model for long-lasting durability and maximum efficiency. Thanks to the higher number of copper coils, there is substantial support for the lighting system. Winding with DOUBLE FILAMENT.
Output wire colors are faithful to the Vespa system.
Hole diameter mm 5.2
Hole distance mm 43
Thickness mm 13
Length mm 72
Technical characteristics:
Yellow wire
Bare ground wire
Complete Dell'orto clamp for carburetor fixing (Diameter 37 mm) for SHB 19.19 for Vespa 50 SR/100/S/125 PV/ET3/PK80/100/125/S/XL
For SHBC 19 E carburetors
Galvanized
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
In aluminum For Carburetors 19/19
Vespa 125 PX T5
Malossi intake manifold d.25 to the crankcase for Vespa 50 PK S-125 PK S
Vespa 50 PK S-125 PK S
Inner tunnel sheet metal from warehouse stock for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5
Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5
Clutch disc kit + Newfren springs for Vespa 50/125 PK FL-HP-N-Ape 50 FL2
Vespa PK 50 FL
Vespa PK 50 FL2
Vespa PK 50 HP
Ape 50 FL2
Composed of 4 cork discs + 3 steel discs + 6 reinforced springs
SIP right brake lever for Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150 VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
Vespa 50-125/PV/ET3/PK/S/XL/125 VNA–TS/150VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso
CNC aluminum
silver anodized
ATHENA Classic Engine Gasket Kit for Vespa 50/90/125 Primavera ET3-Special
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Grease nipple joint spring M8x1.25 mm for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/P150S
for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/P150S
suitable also for Vespa 125 V1-TS/150 VL-Super/180-200 Rally
a=15mm mm
steel, galvanized
fork M8
Stainless steel polished glove box door for Vespa 125/150/200 PX Arcobaleno-T5-Millenium-Disc brake
Vespa PX Rainbow
Vespa PE Rainbow
Ref.Orig: 6732315
WURTH sealant based on silicone Super RTV with high torque capacity - 200ml
Content: 200 ml
Chemical base: Neutral curing silicones, oxime base
Odor/fragrance: Characteristic
Skinning time min: 5 min
Conditions for skinning time: compliant with ASTM D-4678
Full cure rate: 2 mm/g
Conditions for full cure: 23°C and 50% relative humidity
Shore A hardness: 40
Tensile strength min.: 2.2 N/mm²
Conditions for tensile strength: compliant with ASTM D-412
Conditions for maximum elongation at break: 300% / compliant with ASTM D-412
Thermal conductivity λ: 0.2 J/(m*s*K)
Conditions for thermal conductivity λ: in compliance with ASTM D-2214/70
Coefficient of thermal expansion: 0.0002 1/K
Conditions for coefficient of thermal expansion: compliant with ASTM EB-31
Dielectric strength: 16 kV/mm
Conditions for dielectric strength: compliant with ASTM D-149
Dielectric constant: 2.8
Conditions for dielectric constant: 1 MHz, ASTM D-150
Dissipation factor
Universal smartphone holder for Vespa complete with USB charging cable
Adjustable for all smartphone brands, CNC machined forged aluminum, black anodized
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5B1>2T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
450x110x240 mm
metal/plastic
gray
round, narrow
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 90 V9A1T Vespa 125 Primavera VMA1T>2T Vespa 125 Primavera ET3 VMB1T
Tameni crankshaft cone 19 full shoulders (87) stroke 54 rod 97 for Vespa 125 Primavera ET3/PK/ETS
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Polini Clutch Kit modification with 4 discs for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 90 V9A1T
Vespa 125 VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 50/125 PK
Racing clutch disc series with 4 discs and reinforced spring. The clutch discs have been improved with a new material that increases the friction coefficient to enhance grip under stress.
Odometer transmission with LML sheath for LML Star 125-200 2T/4T/ Star Deluxe 125/II/4T Automatic/CVT
for LML Star 125-200 2T/4T/ Star Deluxe 125/II/4T Automatic/CVT
suitable also for Vespa P80-150X/PX80-200E/P200E
Only for odometers with ring mounting
l=1028 mm/ 999 mm
connection (top) 2.7mm, connection (bottom) 2.7mm
Black metal fan cover for Vespa 50 N/L/R-Special-125 Primavera ET3
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
In metal, black color.
Original Piaggio electrical system for Vespa PX'98/MY/'11
VNX2T-FD 6000001> - ZAP M093 EURO1 2004 - ZAP M093 EURO2 2004 - ZAP M741 EURO3 2011 - VLX1T-FD 6000001> - ZAP M094 EURO1 2004 - ZAP M094 EURO2 2004 - ZAP M094 EURO2 2007 - ZAP M742 EURO3 2011 - VSX1T-FD 6000001>. , SYSTEM WITH CONNECTOR TO THE ENGINE WITH N 2 WIRES + GREEN WIRE.
with battery
arrows at 4
from 1998 >2017 .connector to the engine with 2 cables...and green cable to the control unit
Vespa 160 GS 1°, VSB1M -> 0036097
Direct input, full shoulder
stroke: 60.0mm
connecting rod: 110.0mm
with bushing
piston pin Ø 15mm