Classic Vespa
Preloaded M8 Washers MD Racing (4pcs) for Vespa 200 PE-Rally-Cosa Studs
Vespa 200 PE-Rally-Thing
Special kit of harmonic steel washers with preload
specifically to compensate for the play due to thermal excursions of Vespa cylinder studs.
These washers are fully compressed at 2 kgm (20 N/m)
(tightening of Vespa studs) which usually falls within the
Piaggio guidelines between 1.7 and 2.2 Kgm
and compensates for the loosening of the studs subjected to heating and elongation.
Dimensions:
internal diameter 8.4 mm
external diameter 18 mm
thickness 2 mm
washer height at rest on average 2.4 mm
average excursion 0.4 mm
Proma enlarged exhaust manifold MD RACING 32mm for Vespa 125 Nuova VMA1T/125 Primavera VMA2T/ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
Enlarged 32mm collector specific for mounting on PROMA exhaust.
N.B. 32mm actual internal from the exhaust flange then increasing up to the socket!!
Technical features:
Socket made on a lathe from solid material with double attachment ring (see photo) to ensure absolute precision of insertion and better gas sealing compared to the original.
Exhaust flange with a 32mm internal hole perfectly matched, laser cut in 6mm thickness, stable and rectified after welding to have a flat surface with maximum sealing.
Given the generous diameter of the collector and the tight curvature radius, the remaining space for fixing the internal screw of the exhaust flange is very limited.
MD racing provides a stud with an internal hex key to be tightened correctly and a special nut with an 11mm hex instead of 13.
Ensure before assembly that the stud, once inserted into the cylinder and tightened, does not hit the internal curve of the collector, otherwise shorten it using an angle grinder.
Dell'orto SHB16-16F/16G/16H/16L carburetor gasket kit for Vespa 50 N/L/R/S/Special/SR/SS/90/R/SS/125/PK50
for carburetor SHB16-16F/16G/16H/16L
kit of 10 PCS.
For carburetor SHB16-16F/16G/16H/16L
Vespa 125 VNB3T> VNB6T
Vespa 150 VBA1T
Vespa 150 VB1T
Vespa 150 VBB1T> VBB2T
Vespa 150 GS VS2T> VS5T
Vespa 160 GS VSB1T
Main feature: Fixing via handlebar tightening bolt
Finish: Chrome
BGM PRO BigBox SPORT V2 (BBS2) Exhaust for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
BGM BigBox Sport V2 for Vespa PX200
Performance like a racing exhaust - appearance like a stock exhaust
The BGM BigBox Sport V2 is a purebred racing exhaust for Vespa, in the unsuspecting design of an original exhaust. It stands as a clear alternative to large and flashy resonance exhaust systems. The high level of performance clearly distinguishes the BBS2 from other exhaust systems. Designed for performance-oriented drivers who appreciate the benefits of a low-profile vehicle.
NEW BBS V2
The basic concept has been maintained and only adapted to the greater requirements due to the increased power and engine displacement. The BGM BBS2 (=Big Box Sport V2) has widened pipe sections both inside the box and in the exhaust area. This effectively prevents the power fade that often occurs with very powerful engines (over 30 HP).
Additionally, the often-criticized ground clearance of the manifold has been modified. The system is now fully suitable for daily use and has the same ground clearance as a comparable resonance exhaust. Like the Big Box Touring V2, the BBS2 is now also equipped with a connection between the manifold and the exhaust body.
REQUIREMENTS
All models /All Models
Diameter: 1.2 mm
Length: 2000 mm
Barrel: 2.8x3 mm
High-speed Pinasco crankshaft bearing kit for Vespa 125/150/200 GTR-TS-PX-Super-Sprint Veloce
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 PE
Flywheel side: 25x38x15
Clutch side: 25x62x12
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Fastening hardware included
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 90 V9A1T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T, Vespa 125 PX, Vespa 150 PX, Vespa 200 PX, Vespa PX Arcobaleno
Rear Shock Absorber Classic Line
ADJUSTMENT
Spring preload with single ring, continuously adjustable, made with the best aluminum alloys available on the market. The radial holes on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Front shock absorber Classic line,
Adjustments: Single ring spring preload, continuously adjustable, made
with the best aluminum alloys available on the market. The radial holes
on the ring allow, using the practical key provided, to quickly and easily modify the set-up.
Premium engine gasket kit for Vespa 125 GTR 2°/TS 2°/150 Super 2°/Sprint V 2°/PX80-200/PE/Lusso/'98/MY/'11/Cosa
Vespa P 80 V8A1T
Vespa PX 80 E V8X1T
Vespa 125 GT R VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa P 125 X VNX1T
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millenium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 294260>
Vespa P 150 X VLX1T
FASIT Material:
This material is a mixture of cellulose and synthetic fibers, asbestos-free, which ensures a very effective seal.
The same material is used to manufacture gaskets for modern engines.
Primary couple with extended Malossi ratio (Z 23/64) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical gears.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
HTQ Malossi gears are made using exclusively materials
that exceed the strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses CNC machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and
resistance.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Paired in pairs to ensure the correct operating clearance, HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Spacer cover purifier (models with mixer) VESPTEC for Vespa P200E/PX200E/Lusso/`98/MY/T5/Cosa 200
Vespa 125 T5 VNX5T
Vespa 125 T5 Elestart VNX5T
Vespa 200 Rally VSE1T
Vespa 200 PX VSX1T
Vespa 200 PX Arcobaleno VSX1T
Vespa 200 Cosa1 VSR1T
Vespa 200 Cosa2 VSR1T
Cylinder base spacer -BGM ORIGINAL Malossi 210 / Polini 207, Polini 210, Polini 221 / Pinasco 213, Pinasco 225 / Original 200 for Vespa Vespa Rally200, PX200, Cosa200
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
All models / Tutti i modelli
SIP classic speedometer for Vespa 125 V30-33/VM/VN/ACMA/150 VL
Vespa 125 V30-33/VM/VN/ACMA/150 VL
-90km/h
at angles
Ø 73x62 mm
dial color: white
digits: black
rim: chrome
emblem: Classic
connection: 1.9mm
Complete Tameni crankshaft for Vespa 125 VNB-150 VBA/VBB/GL
Vespa 125 VNB1>6T
Vespa 125 VNC1T (1st series)
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
rotary disc valve
stroke: 57.0mm
connecting rod: 105.0mm
piston pin Ø 15mm
Vespa 150 Sprint Veloce VLB1T 0172651>
Vespa 125 T5 VNX5T
1 mm base gasket for thermal group for Vespa 50/90/125 Special-N/L/R-Primavera ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa PK 50 S/XL/N/HP
Vespa 125 PK
Shield Edge in chrome tubular (Adaptable accessory) Vespa 125 VNB-150 VBA/VBB
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Fastening with screws
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Connection to the cylinder complete
Oil level inspection cup gasket for Vespa PX Lusso/T5/Rally with mixer
Vespa PX Rainbow
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (FL) VMX7T
Complete Teflon Coated Transmission Kit for Vespa 125/150/200 PX Arcobaleno
Vespa PX Rainbow
Kit composed of pre-cut sleeves and wires for front brake, rear brake, gear, clutch, starter, throttle
Mirror support bracket on the handlebar in galvanized metal (LH)
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Vespa 180
Vespa 200
Including hardware
Complete starter transmission for Vespa 125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VGLB1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Only for models WITHOUT automatic mixer
Vespa 50/90/125/160/180/200
Piaggio Emblem Genoa Enamel NOS Vespa 125 V1>15T/V30>33T/VM/VL/GS
Vespa 98
Vespa 125 V1T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 150 VL1>2T
Vespa 150 GS VS1T> 007664
Snap-fit with 4 clips
Warehouse stock
All models / All models
Diameter: 1.6 mm
Length: 2000 mm
Barrel: 6x7 mm
All models with tubular handlebars
Low tension pick-up screw/gear preselector cover small M5x40 mm for Vespa PX/T5/V50/PV/ET3/PK/S/XL
Vespa PX/T5: low voltage socket
V50/PV/ET3/PK/S/XL: gear selector cover
For PWK/PHBL/VHST carburetors
Black color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- EN 13594:2015-CE motorcycle certified
Vespa P 200 E
Chrome horn 6v A.C for Vespa 50 V5A1T N/L-90 V9A1T-125 VNB-150 VBB2T
Vespa 50 V5A1T N,L
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T
Vespa 125 VNB3>6T
Vespa 150 VBB2T
6 volt alternating current
Dark green color. Equipped with touchscreen compatibility and knuckle protection, the Gig Pro gloves are made of genuine leather, feature CE D30 protections, and are CE and Moto CE certified.
- 100% genuine goat leather
- soft D30 inserts on knuckles and palm
- velcro adjustment on the wrist
- Moto certified EN 13594:2015-CE
All models / Tutti i modelli
Crimaz disc brake kit for Vespa 50/90/125 Primavera ET3/PK
Vespa 50/90/125 Primavera ET3
Vespa 50 PK S/XL
Kit fully interchangeable with the original, maximum reliability in braking, high-quality materials.
For windshield models with predisposition for cover mounting
Hole diameter: 30cm
Cloth size: 71x44.5 cm