Classic Vespa
Crimaz handlebar disc brake master cylinder for Vespa 50 Special V5B3T
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Crimaz disc brake master cylinder on the handlebar for Vespa 50/125 PK S-XL
Vespa 50-125 PK S-XL
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Disc brake master cylinder assembly Crimaz for handlebar (without pump) for Vespa 50 Special V5B3T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 50 V5A1T N/L/R
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 50 Special V5B3T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
The kit is installed using the two mirror mounting holes, using the Crimaz braided tube it will be possible to install it in the original position (just enlarge the fork exit hole).
Crimaz handlebar disc brake master cylinder for Vespa 125 Primavera ET3/TS/Rally/GL/Sprint
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The kit is installed using the two mirror mounting holes, using the Crimaz braided hose it will be possible to install it in the original position (it will be enough to enlarge the fork exit hole).
Stator wire restoration kit for Vespa 200 Rally FEMSA TRONIC
Vespa 200 Rally VSE1T >0033996
Silicone-rubber wires resistant to temperatures from -60°C to +180°C with peaks up to 230°C, self-extinguishing
Section 1.5 mm, cut to size: green, black, yellow, blue, red
Complete kit includes: Wires, faston, insulating sheath, and cable tie.
Reinforced clutch bell with triangular section for Vespa 50/90/125 Primavera ET3-PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Material-->Hardened steel obtained from solid
Spider for Fabbri racing clutches 4 discs with triangular section instead of the classic cone, ensures grip with any horsepower.
Oversized cooling shroud M200 Fabbri Racing for Vespa 50/90/125 Primavera ET3-PK
Vespa 50/90/125 Primavera ET3-PK
Fiberglass fender Fabbri Racing for Vespa 50/90/125 Special- Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
For forks with disc brake
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Tempered Steel
Vespa 200 Rally VSE1T >0033996
Resistance: 250 OHM
Orig.Ref: 104074
Complete lock kit Neiman type for Vespa 50 N L R Special 90 125 150 160 180 GT GS SUPER PRIMAVERA SPRINT
Vespa 50 V5A1T>236000
Vespa 50 V5A1T 500001> 580000
Vespa 50 V5SS1T
Vespa 90 V9A1T> 31300
Vespa 90 V9SS1T
Vespa 125 Super VNC1T
Vespa 125 Primavera VMA1T>2T>028959
Vespa 125 GT VNL2T >62684
Vespa 150 Super VBC1T>73779
Vespa 150 Sprint VLB1T >077174
Vespa 150 GL VLA1T
Vespa 160 GS VSB1T 0055507>
Vespa 180 SS VSCT
Short model with 4 mm guide
Vespa 50 V5A1T N
White Background, scaled to 60 KM/H.
Included: mounting bracket
SIP graduated disc support adapter SIP/PINASCO for Vespa PK50-125 2°/S 2°/XL/XL2/125 GTR 2°/150 TS 2°/Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa/T5
Vespa PK50-125 2°/S 2°/XL/XL2/125 GTR 2°/150 TS 2°/Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa/T5
M12x1.25 mm with
15.0 mm shoulder
Ø 19.5 mm
Pair of screws for fixing the air filter box for Vespa 160/180 GS-SS
Vespa 160/180 GS-SS
Electrical system for Vespa PK50-125S / PK50SS / Elestart
Vespa 50 PK S Elestart V5X2T 3000001>
For models with battery and arrows
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Fastening hardware included
Vespa P 125 X VNX1T
Vespa P 150 X VLX1T >345648
Unpainted, suitable for models WITHOUT indicators
Pinasco primary transmission gear z27 on bell 69 for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Pinasco has developed a new clutch bell specifically for Vespa Small Frame racing, capable of withstanding the stress created by engine performance increases. Completely machined from solid, the new Pinasco Racing Clutch Bell has the advantage of being more resistant than the stamped one due to the use of carbon steel and the increased support surface of the clutch discs.
Equipped with a specific removable and serviceable shock absorber, the new Pinasco Racing Clutch Bell with straight teeth is a high-tech component that is easy to install.
Arrow switch for Vespa PX - PX ARCOBALENO - PK 50 SS V5S1 - PK 50 S V5X2T - 80 S V8X5T - 100 S V9X1T - 125 S VMX5T - PK 80/125 S AUTOMATICA VA81T - VAM1T - 125 ETS VMS1T.
Vespa 50 PK S Elestart V5X2T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 125 PK S Elestart VMX5T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 Rally VSD1T
White color stickers
Vespa 125 GT from '66 to '73 Vespa 125 GTR from '68 to '71 Vespa 125 Super VNC1T Vespa 150 GL from '62 to '65 Vespa 150 Sprint from '65 to '73 Vespa 150 Sprint Veloce from '69 to '71 Vespa 160 GS VSB1T from '62 to '64 Vespa 180 SS VSC1T from '64 to '68
Color: Cream
Kit for a Vespa (290 cm)
Spare wheel cover in grey plastic for Vespa 180 Rally/125 TS
Vespa 125 TS VNL3T
Vespa 160 GS VSB1T (Adaptable)
Vespa 180 SS VSCT (Adaptable)
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Universal
Vespa 50 PK
Vespa 125 PK
Made from high-quality carbon fiber, it offers a glossy finish (or matte at the customer's choice) provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Carbon handlebar cover model "race" for Vespa 50 Special -elestart
Vespa 50 Special V5B1T > V5B4T
Made from high-quality carbon fiber, it offers a glossy (or matte at the customer's choice) finish provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Enlarged fiberglass engine compartment door M200 for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T 22235>
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
To be used where the closure of the original door is obstructed by the bulk of the thermal group (e.g. m200 quattrini).
Folding kickstart pedal SIP high quality aluminum/black for Vespa PX80-200/PE/Lusso/`98/MY/`11 /Cosa
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Color: aluminum/black
incl. rubber and screw
Vespa 180 SS VSC1T
6V, with battery, high voltage diode
Vespa 125 PX T5
Chrome lock cover ZADI for Vespa 50 R 2°/S 2°/Special V5B3T 2°/100/125 PV 2°/ET3 2°/Sprint V 2°/Super 2°/200 Rally 2°/P80-150X/PX80-200-E/Lusso 1°/P150S/P200E
Vespa 50 V5A1T 912783>
Vespa 50 Special V5B3T 207317>
Vespa 125 GT>GTR VNL2T 151356>
Vespa 125 Primavera VMA2T 0188997>
Vespa 125 Primavera ET3 VMB1T 44966>
Vespa 150 Super VBC1T 529891>
Vespa 150 Sprint VLB1T 0366947>
Vespa 180 Rally VSD1T 041607>
Vespa PX VNX1T>VNX2T> 200000
Included: 2 grains for fixing
Orig.Ref: 174628
Carbon Look Fan Cover for Vespa 125/150/200 PX -PE-Rainbow electric start
Vespa 125 PX Rainbow
Vespa 150 PX Rainbow
Vespa 200 PE Rainbow
Vespa PX Disc Brake
For models with Electric Start
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T
Vespa 150 VB1T
Vespa 150 GS VS1T>5T
Complete
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar), and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to the lack of brakes, not to stability or quality).
Clamp for optical group ring for Vespa 125 GT-150 Sprint-GL-180 SS
Vespa 125 GT VNL1>2T
Vespa 150 GL
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
In metal, to join the optical group to the ring.
Pair of black Malossi GAS model grips for Vespa 50/90/125 Primavera ET3/GTR/Sprint V/TS/Rally/PX
Vespa 50/90/125/150/200
The importance of the grip has been known since the dawn of time.
Man has always sought to make the hold on tools and weapons secure and effective, without neglecting to personalize the grips, sometimes embellishing them with noble materials. Finally, from today, even your motorcycles can have something special: Malossi takes care of it!
The direct contact is almost never missing, the palm and fingertips grip the handle to transmit the command's impulse, sometimes gently, sometimes violently, depending on the temperament or mood of the moment, and the engine, with a sound that is music to the ears of all pilots who live the passion of driving, responds by developing the requested performance and transporting you into the wind.
Malossi grips have no rivals for riding your motorcycle:
they are safe, anatomical, and indestructible, and also charming, because the care of the image is never secondary for us!
Technical features:
High-quality material
Resistant to atmospheric agents, UV rays, and ozone
Reinforced inner flange to support the hand and neutralize vibrations
The UP inscription on the outer part (lateral grip) allows identifying the orientation for correct assembly
<
Clutch bell 7 springs "power up clutch" Malossi for Vespa 200 Rally-PE-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
High-strength steel with surface hardening treatment to increase wear resistance and, consequently, durability.
Reinforcement ring welded with TIG technique on the outer diameter of the bell to effectively counteract the centrifugal force developed by the higher rotational speed.
For original clutch and Malossi POWER UP CLUTCH SYSTEM.
Power Up Clutch Spring Holder Plate Malossi for Vespa 125 T5-200 Rally-PX
Vespa 180 Rally VSD1T 0014741>
Vespa 200 Rally VSE1T
Vespa 125 T5 VNX5T
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
TECHNICAL FEATURES:
Clutch base plate: Hardened steel, high toughness, optimal for components with highly dynamic stresses with a tensile strength of 1000 MPa. Surface hardened (LCN) to 300HB, depth 10-25 µm. Main spring seats machined with offset relative to the clutch bell to ensure intrinsic torque, eliminating any play. Auxiliary spring seats machined aligned with the clutch bell. Tight tolerances between the spring push disc tabs and the clutch bell eliminating clutch noise and increasing durability. Surface induction of the bronze bushing coupling section. Hardened to a depth of 1.5 mm, 60HRC, improving durability. For original clutch bell and POWER UP CLUTCH SYSTEM Malossi.
Power Clutch Spring Holder Plate Malossi for Vespa 125/150 PX-PE
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T 18139>
Vespa 125 Sprint Veloce VLB1T 294260>
Vespa 150 Super VBC1T 412374 >
Vespa 125 PX VNX1T
Vespa 150 VBX1T VBX1T
Vespa 80 PX V8X1T
Vespa 100 PX VIX1T
Vespa 125 PX VNX2T
Vespa 150 PX VLX1T
TECHNICAL FEATURES
Clutch base plate:
Tempered steel, high toughness, optimal for components with highly dynamic stresses with a tensile strength of 1000 MPa.
Surface hardened (LCN) to 300HB, depth 10-25 µm.
Main spring seats machined with offset relative to the clutch bell to ensure intrinsic torque, eliminating any play.
Auxiliary spring seats machined aligned with the clutch bell.
Tight tolerances between the spring push disc tabs and the clutch bell eliminating clutch noise and increasing durability.
Surface induction of the coupling area of the bronze bushing. Hardened to a depth of 1.5 mm, 60HRC, improving durability.
For original clutch bell and POWER UP CLUTCH SYSTEM Malossi.