Classic Vespa
Vintage black CGM "California" helmet goggles with smoke lens 75
CGM "California" vintage helmet goggles in black with clear lens
Gas valve/guillotine Dellorto 09 for carburetors 24/24-26-26 Pinasco
For carburetors SI 24-24/26-26
for SHA carburetors
Pinasco has created an enlarged filter to increase the volume of air drawn into the carburetor for Piaggio mopeds, thereby enhancing engine performance, especially at low revs. In tuning, the increase in displacement and carburetor size reduces the efficiency of the intake system due to a limited air volume, which is often insufficient to fuel the engine. Pinasco Airbox Moped, however, thanks to the increased filtering surface, allows the engine to "breathe" and "respond" effectively to the continuous opening of the throttle valve. The internal baffles and rounded edges around the carburetor channel the air and optimize the flow inside the venturi duct. Care and time have been given to the study of fluid dynamics. Pinasco Airbox is only mounted on SHA carburetors.
All models / Tutti i modelli
Shield anchorage
Ø 120x70 mm
chrome
bar length: 110mm
white / red edge
Manual for service stations from 1955 to 1966 with all necessary instructions for maintenance and repair
Vespa 50/90/125/150/160/180/200
Vespa 180 Rally VSD1T
Vespa 180 Rally VSD1T
Vespa 125/150
Vespa PX Rainbow
Vespa PE Rainbow
All models
Vespa 125/150 PX
LML 125/150
Painted, with aluminum silencer
Note: Long thread M14x1 wrench 20.8 mm
Comparisons-->NGK B9ES/ DENSO W27ES-U
Vespa 160 GS VSB1T
By clicking on purchase, all available sizes will be displayed
Length-->80.9mm
Pin-->15x48.5x10mm
Compression-->42.5
Adaptable for:
Vespa 98
Vespa 125 V1T>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 150 VL1>2T
Vespa 150 GS VS1T> 007664
Michelin CITY GRIP WINTER Tire 3.50/10 for Vespa 125/150/160/180/200 GT/GTR/TS/PX/Rally/SS
Vespa 125 GT
Vespa 125 GTR
Vespa 125 TS VNL3T
Vespa 150 GS VS1>5T
Vespa 150 GL
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
Vespa PX
Size: 3.50/10 Load index: 59J
Notes: TUBELESS
Pulley plate pair for fixing gear and throttle cables to the handlebar for Vespa 125/150/160 VNB-VBB-VB1-GS
Vespa 125/150/160 VNB-VBB-VB1-GS
Vespa PX, Vespa PE
Internal lever for Vespa clutch control rod VM1T>2T - VN1T>2T - VU1T - VL1T>3T - VB1T - VGL1T - VS1T>5T. APE: AB1T>4T - AC1T>4T - PENTARO: APA1T - APB1T. ADAPTABLE INTERCHANGEABLE: VESPA - V98T - V0T - V1T>15T - V30T>33T - APE - A1T>15T.
VM1T>2T - VN1T>2T - VU1T - VL1T>3T - VB1T - VGL1T - VS1T>5T.APE: AB1T>4T - AC1T>4T - PENTARO: APA1T - APB1T.ADAPTIVE INTERCHANGEABLE: VESPA - V98T - V0T - V1T>15T - V30T>33T - APE - A1T>15T.
Sheet metal shield for crankshaft oil seal support for Vespa V98T - V1T>15T - V30T>33T - VU1T - APE: A1T>-15T.
Vespa V98T - V1T>15T - V30T>33T - VU1T - APE : A1T>-15T.
Chromed thrust washer between handlebar and throttle tube for Vespa 125 VM1>2T/VN1>2T/150 VL1>2T
Vespa 125 VM1>2T/VN1>2T/150 VL1>2T
Ape 150 AB3>4T
"Open" carbon fiber fan cover for Vespa 50 N/L/R-Special-125 Primavera ET3
Vespa 50 V5A1T N,L,R from 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Made from high-quality carbon fiber, it offers a glossy
finish (or matte, at the customer's choice) provided by 3 layers of
anti-UV clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 GS VS1>5T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
Dimensions--> Diam. 22 mm x 54 mm, inner hole bored to 7 mm.
Product 100% Made in Italy
Kit of blackened bolts for shock absorber bracket mounting for Vespa 125/150 V1-V33-VM-VN-VB1-GS
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Kit composed of:
2 bolts of 9 long 107mm with 14 wrench
1 bolt of 9 long 69mm with 14 wrench
Zinc-plated screw kit for stand mounting for Vespa 125 VM1-2/VN1-2
Vespa 125 VM1-2/VN1-2
Carburetor elbow fitting PHBH/PHBL for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Vespa 160 GS VSB1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T (adaptable, round lock and not rectangular)
Included: Lock with 2 Keys
Insulating cap for Starter Motor for Vespa 125/150/200 PX-PE-Arcobaleno Elestart
Vespa 125/150/200 PX
Complete thermal group Pinasco (225 cc) LONG STROKE In Aluminum for Vespa 200 PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled robustness and resistance.
Vespa 125
Vespa 150
Vespa 150 Sprint VLB1T > 025390
Vespa 150 GS VS1T>5T
Vespa 160 GS VSB1T
With 2 keys
Nozzle adapter vacuum/mixer Polini hose connection 6mm for all Vespa models
All models
Thread M6x1mm
Internal hole: 3mm
Vespa GTS/GTS Super/GT/GT L 125-300ccm
a=215 mm
l=475 mm
incl. material for assembly
Soft mask with aluminum frame. Unbreakable polycarbonate lenses with anti-fog treatment. Includes microfiber case for lens cleaning.
Notes: UV400 - Normal polycarbonate lenses, suitable for driving. Regulation: 89/686/EEC - EN 1836:2005
Pair of brown grips for Vespa 125 V1>15-V30>33T-VM1>2T/VN1>2T/150 VL1>3T
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1T>2T
Vespa 125 VN1>2T
Vespa 125 VU1T
Ape
Diameter: 25 mm
Color: Brown
Engine gasket kit for LML 125-150 Star DLX/Deluxe/Belladonna/Stella also suitable for Vespa P125-150X/PX125-150E/Lusso/'98/MY/'11
LML 125-150 Star DLX/Deluxe/Belladonna/Stella
Vespa P125-150X/PX125-150E/Lusso/'98/MY/'11