Classic Vespa
Carburetor -BGM PRO Faster Flow Dellorto/SPACO SI24/24E (Without mixer) for Vespa 125 VNB/GT/GTR/TS/PX-150 VBB/GL/SPRINT/V/PX-200 RALLY-PE
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
BGM FASTER FLOW SI Carburetor - optimized carburetor for high-performance engines
High-performance engines require reliable and consistent fuel supply. The BGM FASTER FLOW carburetor is designed to meet these needs, using the SI24/24E or SI26/26E Dell'Orto/Spaco models. Each unit is completely disassembled, tested, reworked, cleaned, and carefully reassembled in our factory, ensuring the highest quality for modified engines.
Main modifications:
Enlarged connection holes from the float chamber to the jets
Added a hole in the float needle area
Spring-loaded float needle for increased durability
These modifications significantly improve fuel supply, preventing shortages even with powerful exhausts. In particular, the spring-loaded float needle compensates for vibrations and increases durability, while the optimized supply is also an advantage for stock engines.
Advantages:
No jet blockage with powerful exhausts
Easy tuning even with over 20 HP
Quiet, powerful, and suitable for everyday use
Available for mixed or separate lubrication
Suitable for:
Engines with SI20/20D or 24/24E carburetors,
LED conversion kit V2 Vespa 125 Primavera/ET3/GT/GTR/Rally/TS/Sprint Veloce/VNB/VBA/VBB/GS150/GS160
Vespa 125 Primavera/ET3/GT/GTR/Rally/TS/Sprint Veloce/VNB/VBA/VBB/GS150/GS160
LED conversion kit for Vespa GTR, Rally, TS, and SV, including everything needed for the conversion to direct current of your electrical system, even with the original ignition.
Specifically, the following components are provided: -12 V DC voltage regulator specific for Vespa use; -Plug and play front bulb holder with paired dual-filament bulb and position light; -Rear position light; -Brake indicator light bulb.
The installation does not require any structural modifications to the headlights or bodywork, nor does it involve replacing the existing cables: the only interventions, if necessary, are on the light switch and the stop button and are completely reversible, so you can restore your Vespa to its original state in no time.
In addition to the provided materials, a small-sized battery is needed, which will be charged when the engine is running and will actively power the entire electrical system. The supplied bulb holder, besides being perfectly compatible with the standard fittings, has been designed and manufactured to achieve the best possible lamp-reflector alignment: this allows maximizing performance, as the light beam projection is directed exclusively on a wide area of the ground with maximum
homogeneity.
Evening outings in the moonlight
Complete thermal group SIP PERFORMANCE in aluminum (177 cc) side spark plug die-cast head for Vespa 125/150 VNB/VBA/GL/Sprint V-GTR-TS-PX
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 125 Cosa
Vespa 150 PX
Vespa 150 Sprint Veloce
Vespa 150 Cosa
Engine type: 125-150cc, Largeframe
Material: Aluminum
7 ports
Ø 63.0mm
stroke 57mm
2 piston ring(s)
Piston pin Ø 15mm
with Head
screwed in 8 points
spark plug angled
TUNING SPORT - powerful
Included in the package you will find two bases, adaptable to both 2-port and 3-port engines
Oil can support - luggage rack for internal shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
Measurements---> L 13.5 cm H18.5 cm
Clutch - BGM Pro Superstrong 2.0 Touring STD Ultralube - Cosa2 lining (steel/cork) - 23 teeth for primary wheel 64/65T for Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Superstrong 2.0 CR joint combines extreme durability, absolute reliability, and ease of use. It is the foundation of every solid engine tuning.
The solid CNC-machined clutch basket has excellent
concentricity and enormous torsional rigidity. It therefore offers perfect
clutch engagement with a well-defined sharpening point and a clean cut. It is suitable both for the touring rider who appreciates high quality,
and for the ambitious racer looking for an extremely robust and
stable clutch. ULTRALUBE The latest generation Superstrong 2.0 CR clutches are now equipped with a new innovative technology: Ultralube. Ultralube
delivers (through precisely defined holes and centrifugal force)
gear oil both in the high-load hub profile (between the
clutch basket and the clutch hub) and in the clutch linings themselves. This technology, unique in the Vespa sector,
makes the legendary Superstrong 2.0 CR clutch even more stable than
it already is. A clutch designed for eternity. PERFORMANCE
The clutch provided ready for installation is adjusted for a
power range up to approx. 20PS /
SIP Touren 2.0 Magnet Flywheel (1.5 kg) for Vespa PK50-125/S/ET3
Vespa PX
Vespa PE
Vespa PK
SIP 76° black stem side stand for Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
Vespa 50-125/PV/ET3/125 VNA/VNB/GT/GTR/Super/TS/150 VBA/VBB/VGLA/B/GL/Sprint/V/Super/P150S/160 GS/180 SS/Rally
l=180 mm
aluminum
Black
with 2 springs, self-folding
Crimaz rigid engine cross elastic pads for Vespa V50/V90/SS50/SS90/125- ET3/PK S/PK XL
Vespa 50 V5A1T 92877>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1T>3T
Vespa 50 PK
Vespa 90 V9A1T 25001>
Vespa 90 SS V9SS2T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Born for the soft use of the Vespa, they reduce the elastic effect of the
traditional rubber support ensuring excellent riding comfort. The elastic joints are contained by a cup made
of acetal resin which further dampens vibrations
without compromising wheel alignment. The central stainless steel shaft is fixed to the frame with 2 M10 screws replacing the original through bolt. Designed
for Quattrini engine casings, they are compatible with Piaggio engine
casings. Check the seat size, it should not exceed diam.
39.25mm
Quattrini M3 XC GTR expansion exhaust for Vespa 125 Primavera- ET3
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Complete with brackets and bolts
Exhaust tested and recommended on Quattrini M1 or M1L cylinders, entirely handmade with a 0.8 mm sheet metal. Aluminum silencer with ceramic fiber.
EGIG Performance One Finger Clutch for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
5 discs
basket
thickness 1.95mm
8 spring(s)
4 washers
thickness 1.60mm
with pressure plate on ball bearings
Lamp 9/32V Mega-LED 2 BA20D 680 lm with built-in resistor
Complete thermal group VMC THUG-58 (135cc D.58 mm) for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
The evolution of Fast Touring for Vespa Smallframe.
Forget the compromises of old-style thermal groups.
The VMC THUG 135cc is the modern answer for those who want to upgrade their Vespa engine ensuring bright performance, smooth delivery, and absolute reliability over time, without having to embark on extreme mechanical complications.
Designed to be a "concrete" cylinder, it is the definitive choice for those looking for a ready and responsive engine at low revs, perfect for long summer journeys. But it doesn't stop there: its geometries make it an exceptional starting point for those who wish to push towards more extreme modifications in the future.
🔥 The Strengths of the VMC THUG
Gilardoni Technology: High-quality aluminum cylinder with galvanic NiKaSil coating by Gilardoni. The result? Unmatched thermal stability, drastic reduction of friction, and no performance drops even under stress or on long trips.
Direct Reed Valve Intake: Equipped with an oversized reed pack (derived from Yamaha RD350). Ensures surgical management of the admission
High-performance synthetic lubricant specifically for 2-stroke engines, keeps rings and pistons clean thanks to optimal combustion.
1 Lt package
Vespa 50/90/125/150/200
Elastic attack with 35 mm fitting, 64 mm filter fitting
Complete LED headlight assembly EVOK for Vespa 125 GT/150 GL/Sprint/180 SS
Vespa 125 GT VNL1>2T
Vespa 150 GL
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
Faro Evok Iron Led for Vespa GL-Sprint-180 SS The headlight for Vespa GL-Sprint-180 SS has been designed and created specifically for the handlebars of the Vespa GL-Sprint-180 SS. It mounts Plug&Play using the connectors of the original headlight and works with both alternating and direct current. The cable colors match the colors of the original system. The headlight has two light combinations: - Low beam and position - Low beam, high beam, and position
All Models / Tutti i modelli
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa GL, GT, Sprint v2
LED conversion kit for Vespa GL, GT, Sprint (trapezoidal headlight), composed of:
12 V DC voltage regulator;
rear position and stop LED bulb;
dual-filament bulb (3000±50 actual lumens) with LED position, paired with a custom-made bulb holder.
The product is perfectly compatible with both the original ignition and 12 V electronic ignition and must be mounted with a 12v 4.5 Ah battery (or higher capacity), which will be charged with the engine running using the supplied voltage regulator: this allows the use of lights and services even with the engine off, greatly increasing comfort.
The bulb holder has been designed to offer the best possible performance on the original headlight without any physical modifications, perfectly optimizing the light beam projection areas: to mount it, simply place it in the original's position and connect it to the vehicle's electrical system.
Jaw holder plate for Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm- PK50-125/S/SS/XL/XL2/Automatic
Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm
Vespa 125 PX E VNX2T 1115>
Vespa 150 PX E VLX1T 346430>
Vespa 200 PX E VSX1T 112624>
Vespa PK50-125/S/SS/XL/XL2/Automatic
Needle bearing clutch kit for VESPA 98 125 frame V1T to V15T frame V30T to V33T VM VU1T Utilitaria VN VESPA ACMA 150 VL1T VL2T VL3T VB1 HOFFMANN
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VU1T
Vespa 125 VN1>2T
Vespa ACMA
Vespa HOFFMAN
Vespa 150 VL1>3T
Vespa 150 VB1T
Measurements: Diam. 2.5 mm x 15.8 mm
29 pieces
Galvanized brackets for fixing canister/bag on platform for Vespa 125/150/160/180/200
All models
Thermal Group Parmakit Puffo Challenger - G.T Vespa ET3 d.57 for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50 130cc
Thermal Group Parmakit "PUFFO Challenger"
Ø 25 Manifold
DIAMETER: 57
DISPLACEMENT: 130
PIN: 15
STROKE: 51
ROD: 97
TRANSFER PORTS: 5
VMC classic 2.5 kg electronic ignition for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
The weight of the Flywheel + Fan is approximately 2500g
A specific cooling fan for use on Vespa Large Frame made of aluminum with 16 blades and an enlarged profile to increase airflow and optimally cool the thermal unit even under the most demanding conditions.
The ignition delivers approximately 90 watts of power and requires the use of 12-volt lamps (this modification involves replacing the lamps in models equipped with 6v).
It ensures better pickup, extension, and acceleration thanks to the ignition advance that varies by 8° degrees, leaving a cooler cylinder at high revs.
The ideal ignition for most engines, both modified and original.
The stator features an auxiliary cable for the optional charging of a battery, which can be managed through the supplied voltage regulator
Instructions are also available in digital format in the attachments section.
SIP ROAD XL Viper Box Racing Exhaust by Nordspeed for Vespa 200 Rally/P200E/PX200 E/Lusso/'98/MY/Cosa 200
Vespa 200 PX-PE
The advantages of the 'Viper Box' in summary:
- Wide power band
- High maximum power.
- Greater tilt angle/intelligently directed.
- Good thermal properties.
The "Viper Box" operates optimally when the cylinder opening times are adjusted to fit its elaborate layout. A transfer port timing of: 130° -136°, an exhaust port timing of: 190° -196°, and a blowdown timing of 30° -32° is recommended.
Vespa 50 PK/S/XL/N/HP/FL
Vespa 125 PK/S/XL/N/HP/FL
Dimensions: 3.5x22mm round head
Purifier bellows for Vespa 125 VNA/VNB1T/150 VBA1T -> 97499/VGLA1T -> 019283
Vespa 125 VNA1>2T
Vespa 125 VNB1T
Vespa 150 VBA1T >97499
Rubber
Black
Original SIEM tail light for Vespa 125 VNB1-5/150 VBB/GS VS5/160 GS
Vespa 125 VNB1>5T
Vespa 150 VBA1T 110486>
Vespa 150 VBB1>2T
Vespa 150 GS VS5T 0087590 >
Vespa 160 GS VSB1T
Included screw for fixing
3506 IGM 0438 AR - 3515 IGM 0439 LPX
Vespa 125 VNB1T 032100 >
Vespa 125 VNB2T>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T 112180 >
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GS (Adaptable-Adapdable)
Vespa 160 GS VSB1T (Adaptable-Adapdable)
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T (Adaptable-Adapdable)
Vespa 200 Rally VSE1T
Included Base Gasket
Vespa 125 VNB1>6T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 VGLA1T
Vespa 150 VGLB1T
Vespa 150 GL VLA1T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa PX
Vespa PX Arcobaleno series
(19)x240mm, (2)x80mm, clamps
Carbon cooling shroud side spark plug for Vespa PX80/125/150/PE/Cosa
Vespa 125/150 PX
Made from high-quality carbon fiber, it offers a glossy (or matte, as per the customer's choice) finish provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Thermal Group Parmakit CHALLENGER - Vespa ET3 Ø57 130cc - d30 manifold for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Thermal Group Parmakit "Challenger"
Ø 30 Manifold
- aluminum cylinder Ø 57 - nicasil lining
- intake manifold Ø 30 mm
- fusion head with side spark plug hole
- 4-petal reed valve
- Vertex piston with one steel ring
Flow guide not included
DIAMETER: 57
DISPLACEMENT: 130
PIN: 15
STROKE: 51
ROD: 97
TRANSFERS: 5
Complete strip kit for platform for Vespa 80/125/150/200 PX-PE 1st Series
Vespa 80 PX V8X1T >30160
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >44000
Vespa 150 PX VLX1T >410580
Vespa 200 PE VSX1T >138292
O-ring brake cam 17.5mm, Øi 12.5 mm (thickness): 2.4mm for Vespa PK50-125/S/XL/XL2
Vespa PK50-125/S/XL/XL2
2.5X13.8mm
Pinasco Tubeless polished aluminum full wheel rim (3.50/8) for Vespa 98/125 V1-15/V30-33/VU /VM/VN/VNA/Hoffmann/VNB/ACMA /150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Includes nuts and washers
Hello SC-Hello 1st series
External high voltage coil for Vespa PK50/S/XL/Rush-Bravo/SI /Ciao
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush V5X4T
Vespa 50 PK N V5X5T
Ape 50 TM
For installations without needles
MADE IN ITALY
External high voltage coil for Piaggio Ciao Bravo SI SI FL2
Piaggio Ciao, Bravo, SI, SI FL2
MADE IN ITALY
Chrome fan cover for Vespa 80/125/150/200 PX-PE without electric start
Vespa PX
Vespa PE
In chrome-plated metal
Pair of light and indicator bulbs for Vespa P80-150X/PX80-200E/P200E
Vespa PX until 1983
Vespa PE until 1983
Complete with Lamps and lamp holders
Green and Orange