ON SALE
Complete Reed Valve Engine Case 8X 2.0 for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
How many times have you been stranded with your Vespa due to the clutch side oil seal? How many times have you thrown up your hands in surrender because the oil seal slipped out of its seat? How many times have you damaged the bearing seat because of the extremely hard clutch springs and engine performance?
Pinasco, always seeking solutions to the most common problems of modified Vespas, offers a solution to this inconvenience by updating the clutch bank of its engine casing with the new 2.0 model.
Thanks to the new fastening system with 3 steel plates, the specific Pinasco oil seal is locked between the casing and the crankshaft bearing without the possibility of coming out of its seat. The plates ensure perfect registration of the bearing, eliminating the play that often forms between the circlip and bearing, and the safety clips ensure the total locking of the entire system.
The new bearing seat has been further reinforced with the addition of 3 new ribs that guarantee the support and holding of the entire engine bank, and 2 reinforcement ribs have been added on the cluster shaft.
The crank chamber is bored to accommodate crankshafts with increased shoulders.
The die-casting technique used for
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Thickness: 1mm
Complete thermal group Pinasco (225 cc) LONG STROKE In Aluminum for Vespa 200 PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled robustness and resistance.
Faco Racing Exhaust for Vespa 125 VNB/GT/GTR/TS/PX-150 Sprint V/GL/VBB/PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black color
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa
Gas oleo-pneumatic, 24 hydraulic compression adjustments and 10 extension adjustments.
Body: black, spring white
Sawa/Mitas B13 Tire 3.50/8 for Vespa 125 V1>15T/V30>33T/VM1>2T/VN1>2T-VNA/VNB-150 VBA/VBB/VL1>3T/VB1T
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
Measure: 3.50/8
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5B3T
Vespa 50 PK S/XL/N
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Clutch discs included
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Malossi PISTON ร 68.5 SELECTION B WITH ร 16 PIN AND 2 CHROMED SEMITRAPEZOIDAL RINGS
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Pinasco 30mm reed valve intake manifold SLAVE crankcase for Vespa 125/150 PX-Sprint-GT-GTR
Vespa 125/150 PX-Sprint-GT-GTR
Thermal Group Kit with Long Stroke Crankshaft Pinasco 60 mm (225 cc) for Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Polini thermal group head (125 cc) for Vespa 125 Primavera ET3-PK-ETS
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Compatible with d57 thermal groups
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Brand new thermal group made of aluminum alloy with Nikasil coating, new transfer ports, enlarged exhaust, and lightweight piston, maximum performance.
Stroke 60, diameter 69 mm, 9 transfer ports
Complete thermal group Pinasco 215CC 957 RR Master 9 ports for Vespa 200 PE/Rally/Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Aluminum fusion with NiCaSil galvanic coating - Displacement 215cc - Bore 69mm - Stroke 57mm - Central spark plug head 8 studs - Classic Exhaust - Single-ring Piston - Intake to the Crankcase-
Low transparent windshield Piaggio Cruiser version for Vespa 80/125/150/200 PX-PE-Arcobaleno-Millenium
Vespa PX
Vespa PE
Vespa PK
Included: Brackets, screws, and assembly instructions
Dimensions-->a=185 mm, l=445 mm
Vespa 50 N V5A1T>1965
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Kit composed of:
BEARINGS:
- Crankshaft flywheel side 20x47x14 mm 07-BI-006-CI
- Crankshaft clutch side 17x47x14 mm 07-BI-001-CI
- Gear shaft 10x30x9 mm 07-BI-015-CI
- Clutch bell 25x47x8 mm 07-BI-005-CI
- Gear shaft (roller type) 16x22x12 mm 07-BI-007-CI
- Rear wheel 20x47x14 mm 07-BI-021-RM
GASKETS:
- 07-BV-003-CI
SEALS:
- 07-CL-
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black color
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
PISTON Malossi ร 68.5 SELECTION 0 WITH PIN ร 16 AND 2 CHROMED SEMI-TRAPEZOIDAL SEGMENTS
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Pinasco Racing crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Valve type
Complete thermal group Pinasco 957 VTR 9 port reed valve (215 cc)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Brand new thermal group made of aluminum alloy with Nicasil coating, new transfer ports, enlarged exhaust and lightened piston, maximum performance.
Stroke 57, diameter 69 mm, 9 transfer ports, reed valve on the cylinder.
Malossi power classic exhaust for Vespa 125 VNB/GT/GTR/TS/PX-150 Sprint V/GL/VBB/PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT/GTR/TS/Super
Vespa 125 PX
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint/GL/Super
Vespa 150 PX
Painted in black color
Complete thermal group with two cast iron transfers Pinasco (190cc) with central spark plug for Vespa 125/150 VNB-GT-VBB-VBA-GL-Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Bore: 63 mm
Displacement: 190cc
Central spark plug
Stroke: 60 mm
Complete thermal group Pinasco central spark plug (225 cc) long stroke in aluminum for Vespa 200 PX PE
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Cylinder made of Aluminum alloy with Nicasil coating that ensures unparalleled strength and resistance.
Stroke 60
225cc
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Compatible with Carter Pinasco and Pinasco crankshaft code 26081951
"Racing" crankshaft Pinasco full mass crankcases for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97, shoulders 88mm, complete with screw-in inserts to increase its weight which without them weighs 192 gr.
Bronze inserts-->104gr, iron-->95gr, aluminum-->34gr
8mm cylinder base spacer kit for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full circle crankshaft Malossi cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 105
Full shoulder crankshaft for reed valve intake system.
WARNING: Purchase of code 07-NB-005-MA is required
Full shoulder Malossi crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Full shoulder crankshaft for reed valve intake system.
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Intake phase obtained inside the half-shoulder, in the same circular mass structure
This machining results in a significant slotting facing inward, while maintaining a regular external profile.
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 19 mm / Cone 19 mm
Stroke 51 rod 97
Intake phase obtained inside the half-shoulder, in the same circular masses structure
This machining results in a significant slotting facing inward, while maintaining a regular external profile.
Complete thermal group Parmakit (177cc) TSV in aluminum with side spark plug type a
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63
Displacement: 177cc
Stroke: 57 mm
Complete thermal group Pinasco 960 VTR 9 reed valve transfers (225 cc)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Vespa 200 PE VSX1T Millennium '98
Brand new thermal group made of aluminum alloy with Nicasil coating, new transfer ports, enlarged exhaust, and lightweight piston, maximum performance.
Stroke 60, diameter 69 mm, 9 transfer ports, reed valve on the cylinder.
Complete thermal group Pinasco "Vespone RX" racing booster (190 cc)
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Born for competitions but with great reliability, aluminum cylinder, 8 stud head with central spark plug, exhaust booster, large transfer ports, and graphite-coated piston.
Bore: 63 mm, displacement 190cc, stroke 60 mm
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Bore: 63 mm
Displacement: 177cc
Stroke: 57 mm
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Bore: 57
Stroke: 51
Vespa 125
Vespa 150
Vespa 180
Vespa 200 Rally
Including Tie Rods and Pads