ON SALE
Complete Master Engine Crankcase "Valve" 2.0 for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
How many times have you been stranded with your Vespa due to the clutch side oil seal? How many times have you thrown up your hands in surrender because the oil seal slips out of its seat? How many times have you damaged the bearing seat due to the extremely hard clutch springs and engine performance?
Pinasco, always seeking solutions to the most common problems of modified Vespas, offers a solution to this inconvenience by updating the clutch bench of its engine casing with the new 2.0 model.
Thanks to the new fixing system using 3 steel plates, the specific Pinasco oil seal is locked between the casing and the main bearing without the possibility of coming out of its seat. The plates ensure perfect bearing registration, eliminating the play that often forms between circlip and bearing. The safety clips guarantee the total locking of the entire system.
The new bearing seat has been further reinforced with the addition of 3 new ribs that ensure the support and sealing of the entire engine bench, and 2 reinforcement ribs have been added on the cluster shaft.
The crank chamber is bored to accommodate crankshafts with larger shoulders.
The die-casting technique used for the casing guarantees superior strength
Vespa 50 S ZAPC38103 2T AC `07
Vespa 50 S 2v ZAPC38901 4T AC `10
Vespa 50 S 4v ZAPC38600 4T AC `08
Vespa 125 S ZAPM44302 4T AC `07
Vespa 125 S i.e. ZAPM68101 4T AC `09
Vespa 125 S i.e. 3v ZAPM68301 4T AC `12
Vespa 150 S ZAPM44402 4T AC `08-`09
Vespa 50 LX 4V 4T ZAPC38700 (2009)
Vespa 50 Primavera 4V 4T ZAPC531 (2013)
Vespa 50 S 4V 4T ZAPC38600 (2008)
Vespa 50 Sprint 4V 4T ZAPC53101 (2014)
Ref. Orig. 8808745
Polini short stroke exhaust manifold for Vespa 50 Special V5A2>3T/V5B1>4T
Vespa 50 Special V5A2>3T/V5B1>4T
for Polini "banana" exhausts
Fabbri Racing "MOWER" crankshaft with Primatist rod, full cheeks 83mm, taper 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
The use of a crankshaft with 83 mm shoulders does not require boring of the engine cases.
Fabbri Racing recommends using a 6204 bearing instead of the 6303 on the transmission side, paired with a specific oil seal with dimensions of 27x47x6 mm.
Bearings and oil seals are not included in the kit and must be purchased separately.
The recommended balance factor for pistons with a diameter between 57 and 60 mm is between 45 and 50.
Technical specifications:
Flywheel side bearing seat diameter: 20 mm
Clutch side bearing seat diameter: 20 mm
Flywheel side oil seal seat diameter: 20 mm
Clutch side oil seal seat diameter: 27 mm
Weight: approximately 1.4 kg
Material: Plastic
Front rack in black color with gas can holder (black can included)
All up to the PX model / All Models >PX
Included Ties and pads for fixing
Note--> INCLUDED 5 lt canister (black color)
Front luggage rack in black color with gasoline can holder (can included)
All up to model PX / All Models >PX
Included Tie rods and pads for fixing
Note--> 5 lt CANISTER INCLUDED
Vespa 98, Vespa 125 from 1948 to 1965, Vespa 150 from 1954 to 1966
Measurement: 3.50/8
Complete thermal group two transfers in Aluminum Pinasco (177cc) for Vespa 125 VNB/Super/GT/GTR-150 VBA1T/VBB/GL/Super/Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Bore: 63 mm
Displacement: 177cc
Stroke: 57 mm
Vespa 50/125/150 Primavera
The leg cover is equipped with the PATENTED S.G.A.S. ANTI-FLAP INFLATABLE SYSTEM: the inflatable chambers on the lateral exit edges prevent flapping at high speeds.
- Three-layer construction to ensure waterproofing and thermal protection:
- outer layer in heavy-duty waterproof nylon with taped seams
- 100% waterproof inner membrane
- padded interior
- S.G.A.S. (patented anti-flap system)
- anti-theft ring (only on non-screwed models)
- large storage pocket
- seat cover inserted in the bib
- reflective profile
Thermal group VMC GS 56 125cc ร 56mm for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Bore diameter 56mm
Stroke 51mm
Displacement 126cc
Timing: Main transfers 124ยฐ Exhaust 174ยฐ
High silicon content aluminum alloy dual-ring piston.
Die-cast aluminum head, Steel rings, Steel pin, Steel retainers
Recommended squish 1.2 mm Bolt tightening m6 11-12 Nm, nuts m7 1.4-1.5 Nm
It mounts with crankshafts stroke 51mm and rod 97mm
Attention: To be mounted on Piaggio crankcases, a small modification on the half-moon is needed as the cylinder has been designed with generous fluid dynamics that require more space at its base.
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Windshield with chrome supports -MOTO NOSTRA, l=300mm, h=105mm- Vespa PX80, PX125, PX150, PX200, LML 125/150 Star/Stella - colorless
Vespa PX
Vespa PE
Included: Brackets, screws, and assembly instructions
Dimensions--> L 105mm, H 340mm
Inner frame sheet metal right and left for Vespa 50 N/L/R- Special-90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Finish--> Raw
Thermal Group Kit and Pinasco Long Stroke 60 mm Crankshaft (190 cc)
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
Bore: 63 mm
Displacement: 190 cc
Stroke: 60 mm
All up to model PX / All Models >PX
Included Tie rods and pads for fixing
Manufacturer: CUPPINI (100% made in Italy)
Notes: Model with long arms
Vespa 50/125/150 LX
Vespa 50/125/150 LXV
Vespa 125/150 PX '2011
Vespa 50/125/150 S
The leg cover is equipped with the PATENTED ANTI-FLAPPING INFLATABLE SYSTEM S.G.A.S: the inflatable chambers on the side exit edges prevent flapping at high speeds.
- Three-layer construction ensuring waterproofing and thermal protection:
- exterior in heavy-duty waterproof nylon with taped seams
- 100% waterproof internal membrane
- padded interior
- S.G.A.S. (patented anti-flapping system)
- anti-theft ring (only on non-screwed models)
- large storage pocket
- seat cover inserted in the bib
- reflective profile
All models
Useful accessory for turning cylinder heads. Suitable for any type of head.
Vespa PX 125
Vespa PX 150
Vespa PX 200
Vespa PE 200
Vespa 125 VM1T>2T Adaptable (Originally in aluminum)
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T Adaptable (Originally the left cowl was provided with a lock)
Finish: Raw
Material: Steel
Malossi VR-ONE bare engine casing with reed valve for Vespa 200 PX-PE
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
The V-One is designed for those who want a casing perfectly replaceable with the original, provided with all the components necessary for assembly and allowing maximum interchangeability with components available on the market, it requires no aesthetic modification of the vehicle and fits all original Piaggio parts.
The crankcase seats are designed to accept the original crankshaft bearings and seals (not provided). V-One can be mounted with the original DellโOrto Si 24-24 carburetor.
It is possible to use the original crankshaft or our rotary valve crankshaft with a 57mm stroke art. 5316082. Whatever the choice, the intake has been reviewed and implemented thanks to our modern
CAD systems that have profiled an optimized intake duct in the casing.
Entirely made in ITALY
------------------------------------------------------------------------------------------------------------
Without mixer
With electric start
Reed valve (Not included)
All models
Color: Red
Red color sticker kit on plastic saddle skirt for Vespa 50/125 PK N-FL-HP
Vespa 50/125 PK XL
Note: The plastic skirt is not included
POLINI Sport 177 cc tuning kit for Vespa 125 VNB/Super/GT/GTR-150 VBA1T/VBB/GL/Super/Sprint
Vespa 125 VNB1>6T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
ร 63mm
stroke 57mm
with SIP Road, clutch discs, POLINI air filter, SI 24 carburetor (without mixer), etc.
Rotary valve engine casing (LML) for Vespa 125/150 PX-Sprint-GT-GTR
Vespa 125 PX
Vespa 125 GT/GTR/TS
Vespa 150 PX
Vespa 150 Sprint Veloce
with mixer
with electric starter
rotary disc valve
3 transfers
Flywheel side bearing adapter-GELB- for conversion of engine casing V50, PV125, ET3, PK S, PK XL from ball bearing type 6204 to needle roller bearing type ETS / PX (NBI 253815 - 25x38x15mm) for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 rod 97
flywheel side bearing: 25mm
flywheel side oil seal: 24mm
flywheels:
87mm flywheel side
86mm sprocket side
cases to be bored
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millenium '98
Vespa 200 Cosa VSR1T
The V-One is designed for those who want a perfectly replaceable casing to the original, supplied with all the necessary components for assembly and allowing maximum interchangeability with components available on the market, requiring no aesthetic modification of the vehicle and fitting all original Piaggio parts.
The crankcase seats are designed to accept the original crank bearings and seals (not supplied). V-One can be mounted with the original DellโOrto Si 24-24 carburetor.
It is possible to use the original crankshaft or our rotary valve crankshaft with a 57mm stroke art. 5316082. Whatever the choice, the intake has been revised and implemented thanks to our modern
CAD systems that have profiled an optimized intake duct in the casing.
Entirely made in ITALY
Thermal group without head Malossi sport CVF2 in aluminum (210 cc)
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Bore: 68.5 mm
Stroke: 57 mm
Long reach spark plug
Power range: 16>23 hp
7 ports
Pinasco competition full circle crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 rod 97
Range of extremely high-performance crankshafts, dedicated to fast touring and competitions. The PINASCO COMPETITION crankshafts
are alongside the classic production and differ for:
- more aggressive intake degree
- new fluid dynamics of the intake cut
- new racing imbalance obtained with tungsten inserts
- innovative Teflon inlays to increase the internal pressure of the crankcases from the lowest revs
The PINASCO COMPETITION crankshaft significantly increases power and maximum torque from low revs, the engine's rotational speed increases, improving overall performance.
Material: Fabric
Complete clutch assembly FERODO for Vespa 50-125/PV/ET3/PK50-125/S/X
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Vespa 125 PK ETS VMS1T
Composed of 3 cork discs + 2 steel discs
Spring hardness: Standard
All models
Containers made of steel, 0.8 mm thick, plasma welded.
Powder coating
Corteco oil seal kit (24x35x7) for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Compatible with Carter Quattrini and Pinasco
Advanced crankshaft ZIRRI cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Valve type
RIPARO START outdoor cover in black polyester for scooter/vespa with top case and windshield
Note: For models with top box and windshield
Quattrini high-speed oil seal kit (24x35x7) for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Compatible with Carter Quattrini and Pinasco
All models
Color: black
Malossi gasket kit for thermal unit d.68.5mm (210 cc) for Vespa 200 PX-PE-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Bore: 68.5 mm
Stroke: 57 mm
Long thread spark plug
Power range: 23>30 hp
7 transfers
MHR Version: The MHR version differs from the SPORT one not only in the exhaust port, but also in the decidedly racing transfer diagrams.