Tutti i prodotti
Vespa 125/150/200
for carburetors SI 20.20 - 24.24D/E/G DELL'ORTO
branded SPACO
Carburetor bowl cover screw M5x50 mm crosshead for Vespa P80-150X/P200E/PX80-200E/Lusso/'98/MY/'11/T5
Only for models with mixer
All models / All models
Fully synthetic lubricant with Alpha-Tech® specific for trial motorcycle clutches. It ensures exceptional clutch modulation over time and in all usage conditions.
Master engine crankcase 46X46 with 12mm pin shaft for Piaggio Ciao-Si-Bravo
Hello-YES-Bravo
The Pinasco Power Casing Engine Case for Piaggio Moped has been designed to accommodate a crankshaft with a valve side shoulder 5mm wider than the original, with 43mm and 46mm stroke, rotary valve intake with interchangeable manifolds of 13mm (provided), 21mm (optional), and additional CNC machined transfers. The kit is available in 2 distinct versions, Valve and Reed for thermal groups with a bore of 43mm and 46mm and comes with the dedicated crankshaft and all mounting accessories.
Bushing and washer for Malossi clutch bush for Vespa PX, T5 125cc, Cosa, Rally, TS, Sprint, GT, GTR, SS180, GS160 / GS4, GL, Super, VNA, VNB, VBA, VBB
Vespa 125 (Excluding primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
All Models
Sintered bronze bushing B50
Bronze washer
Spring push disk
For original clutch bell
and Malossi POWER UP CLUTCH SYSTEM.
Ape 50 TM-FL-FL2-FL3-MIX-RST
Ape TM 703
AGM Battery 6V-5 Ah for backup use Digital Odometer-Various for Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/160/180/200
TECHNOLOGY:AGM
VOLTAGE:6v 5ah
WEIGHT:0.95
LENGTH:(MM)70
WIDTH:(MM)47
HEIGHT:(MM)101
TOTAL HEIGHT:107
TERMINAL:F1
Original Piaggio starter gear 12-12 teeth diam.20.5mm for Vespa 125/150/200 PX-PE-Cosa
Vespa 125 PX from frame 146314, Vespa 125 PX T5, Vespa 150 PX from frame 264565, Vespa 180 Rally VSD1T, Vespa 200 Rally VSE1T Vespa 200 PE, Vespa PX/PE Arcobaleno series
12-spline gear
Internal diameter: 20.5 mm
Gas control tube for Vespa 125 GTR 2°/TS 2°/PV 2°/ET3/150 Sprint V 2°/Super 2°/200 Rally 2°
Vespa 125 Primavera ET3 VMB1T
Vespa 125 TS VNL3T
l=310 mm
handle length: 117mm
length in the handlebar: 192mm
Ø 24 mm
SIP Tubeless full wheel rim beige patina (3.50/8) for Vespa 98/125 V1-15/V30-33/VU/VM/VN/VNA/Hoffmann/VNB/ACMA/150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
2.15 Ø 8"
closed
aluminum
beige patina
4 holes
Vespa 50/90/125/150/180/200
Compatible with 10-inch open rims, it attaches to the fork tube by passing it through the wheel rim and securing it with the provided lock.
Complete left rear Bosatta indicator for Vespa PK50-125 XL/RUSH/XL2/N/FL/HP
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa 50 N Speedmatic FL1 from 1989
Vespa 50 PK FL2 from 1990
Vespa 50 PK XL Rush
Vespa 125 PK XL
Plastic
Gasket
Complete with lamp holder
Orange
CC Racing Clutch Disc Kit for Vespa 125/150/200 VM/VN/VL/VB1/VBA/VBB/VNB/GL/Sprint/Rally/PX-PE
Vespa 125/150/200 VM/VN/VL/VB1/VBA/VBB/VNB/GL/Sprint/Rally/PX-PE
Compatible ONLY with CCCorsa clutches.
Ape 50 TM
Stroke: 51mm
Polished connecting rod
For modification from 50cc to 125cc
Mazzuchelli crankshaft advanced cone 20 stroke 51 for Vespa 125 PK S/XL
Vespa 125 PK S/XL
Stroke 51 mm, polished connecting rod, 20 mm cone
Carburetor POLINI SI 24 -24 E with mixer R583 for Vespa 200 PX-Rally
Vespa 200 PX VSX1T With Mixer /with mixer
Vespa 200 Rally VSE1T With Mixer /with mixer
-Ø 26 mm
-Maximum jet 116
-Minimum jet 50/160
-Emulsifier BE4
-Air calibrator 190
POLINI Carburetor SI 26 -26 E with mixer R617 for Vespa 200 PX-Rally
Vespa 200 PX VSX1T With Mixer /with mixer
Vespa 200 Rally VSE1T With Mixer /with mixer
-Ø 26 mm
-Maximum jet 120
-Minimum jet 55/160
-Emulsifier BE4
-Air calibrator 190
Vespa 50 N-L-R V5A1T
White background, scaled to 80 KM/H
Complete with transmission and return.
Vespa PK N-FL-HP
anthracite
incl. fastening, springs
Polini ignition bracket for Vespa 50 N/L/R/Revival/S/Special/SR/SS/90/R/SS/100/125 PV/ET3/PK50-125/S/XL/XL2/N/ETS
Vespa 50/90/125 Primavera ET3/PK
Complete with small hardware
Color: Blue
Reed valve petals -TASSINARI VForce 4- Yamaha Bashee (type Yamaha RD350/RZ350 YPVS) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Starter sector for Vespa 125 VNB4-6T/GT/GTR/Super/TS/150 VBB2T/GL/Sprint/V/Super/160 GS/180 SS/180-200 Rally
Vespa 125 Super VNC1T
Vespa 125 VNB4>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Vespa 150 VBB2T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Kickstart lever graft with 5 LINES
Sector with 10 teeth
Clutch disc kit incl. steel discs -BGM PRO Superstrong Racing Red Vespa Smallframe V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS - 4 discs
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
The bgm PRO Superstrong clutch linings in the "Racing Red" version are among the most high-performing on the market. The heavy-duty organic compound of the lining has been created for the high pressures and high temperatures of racing. The high-quality pad material is thinner than a conventional cork pad. This allows for the insertion of an additional friction disc in the entire Racing Red pad package.
BGM clutch disc kit including steel discs for Vespa 50/90/125 Primavera ET3-PK-S-XL-Ape 50
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
Vespa 50 Special
Vespa 50 SS V5SS1T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T > VMA2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
3 Pc Set
+ interdiscs
Vespa 125/200/250/300 GTS/GTS Super/GT/GT L
Measures--> H 730mm L 725mm, including mounts with chrome stems.
SIP PERFORMANCE Sport suspension spring in black for Vespa 125/150/180/200 Super-GT-GTR-TS-Super-Sprint-Sprint Veloce-Rally
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T (Adaptable)
Vespa 200 Rally VSE1T (Adaptable)
l=165 mm
black
hardness: M, 25% harder
Complete optical group with yellow transparent for Vespa 50 V5A1T N/L/R
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
2-light lamp holder
Diameter: 105 mm
Transparent in yellow plastic
Vespa 125-200 Cosa 1-2
Diameter 22 mm
Feet included
Piaggio starter cable with knob for Vespa 125/150/160/180 VNB-GT-SUPER-VBB-VBA-GL-SPRINT-GS-SS-PX 80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Vespa 125 VNB1T>6T
Vespa 125 GT VNL1>2T
Vespa 125 Super VNC1T
Vespa 150 VBB1T>2T
Vespa 150 VBA1T
Vespa 150 Super VBC1T >221194
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa PX 80-200/PE/Lusso/'98/MY/'11/T5/Cosa
Black BGM suspension spring for Vespa 125/150/180/200 Super-GT-GTR-TS-Super-Sprint-Sprint Veloce-Rally
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T (Adaptable)
Vespa 200 Rally VSE1T (Adaptable)
Primary transmission gear set EGIG Performance straight teeth Z 50x21 (2.38) for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Transmission ratio: Z50/21 = 2.38
S/R Version: Street / Road configuration, designed for high-performance street engines.
Reinforced teeth: the limited number of teeth allows for a wider and stronger tooth base, increasing the robustness of the transmission.
Primary sprocket: traditional fastening system, without polygonal attachment.
Recommended applications: ideal for high-performance engines such as EGIG220, Quattrini M200, and other Smallframe engines of equivalent power.
Gearbox configuration: particularly suitable in combination with close-ratio gearboxes, for example with a secondary shaft 17–20.
On-road behavior: the first gear is pleasantly long, while the second to fourth gears have close ratios, promoting smooth and sporty progression.
Vespa 50/125 PK
Vespa 125/150/200 PX
Original Piaggio odometer transmission for Vespa P80-150X/PX80-200E/P200E also suitable for LML Star 125-200 2T/4T/ Star
Vespa 80/125/150/200 PX PE
Internal transmission with large frame
l=1028 mm/ 999 mm
Starter gear spring for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/T5/Cosa
Vespa 125/150
Original Piaggio starter gear spring for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/T5/Cosa
Black plastic handlebar cover for Vespa Cosa 125-200 FL-917300 - 2971200 (PIAGGIO)
Vespa Cosa 125-200 FL
With two mirror holes
Vespa 125/150/200 COSA 2