Vespa Fuel System Group
Vespa Fuel System Group: A selection of essential components to ensure proper fuel supply and perfect engine performance for your Vespa. Here you can find carburetors, air filters, and enhanced fuel taps designed to improve combustion and the performance of your scooter. Keep the engine in perfect condition by frequently cleaning and servicing your carburetor. Use only quality gaskets and a BARDAHL cleaner.
Venturi Intake Cone Sil-tech Performance for Dellorto SHBC 19.19 E Carburetor
For Dellorto SHBC 19.19 E carburetor
The Dell'orto SHBC carburetor series features a cylindrical venturi duct. This shape, simple to produce during manufacturing, however, presents some efficiency issues.
The Siltech Performance Venturi cone has been designed to address the problem of turbulence generated by the cylindrical cone. Through various simulations with different shapes, a form has been achieved that optimizes the incoming air flow, eliminating turbulence and significantly optimizing performance.
An interesting fact is that it is possible to mount the dedicated Siltech Performance air box or the Polini air box (203.0019).
Carburetor elbow fitting PHBH/PHBL for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
Adaptable to all models / All Models
Vespa 50/90/125
Venturi intake cone in aluminum MOTORISTICA MERIDIONALE for SI 28 Carburetors Vespa 200 Rally/P200E/PX200 E-Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 200 Rally/P200E/PX200 E
Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
The Venturi for SI 28 carburetors is designed to improve engine performance without compromise. Combined with an enlarged airbox, the performance will be significantly increased. The 6061 ALUMINUM material ensures eternal durability. Each venturi is polished to reduce surface roughness. To reduce turbulence in the venturi, a thread reduction system from M5 to M3 has been adopted.
No risk of screw loss. Thanks to a thread reduction system, the screws are constrained by the reductions themselves, locked with Loctite. This system allows for maximum safety and maximum flow.
Venturi intake cone in aluminum MOTORISTICA MERIDIONALE for SI 24 SI26 Carburetors Vespa 200 Rally/P200E/PX200 E-Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 200 Rally/P200E/PX200 E
Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
The Venturi for carburetors SI 24 - 26 / G T5 is designed to improve the engine's performance without compromises. Its ultra-compact shape makes it super efficient even with low air-boxes. The 6061 ALUMINUM material ensures eternal durability. Each venturi is polished to reduce surface roughness. A threading reduction system from M5 to M3 has been adopted to reduce turbulence in the venturi. It is compatible with PX-T5 type carburetors.
No risk of screw loss. Thanks to a threading reduction system, the screws are constrained by the reductions themselves, locked with Loctite. This system allows for maximum safety and maximum flow.
Dell'orto gas valve (45) PHBH carburetor for Vespa 50/90/125/150/200 Special-GT-GTR-TS-PX-GL-ET3
For PHBH carburetor
100% synthetic high-performance lubricant specific for 2-stroke engines.
Very useful built-in measuring cup.
Vespa 50/90/125/150/180/200 GT-GTR-TS-VNB-PX-VBB-VBA-Sprint-Super-GL-GS-Rally
Original Piaggio air filter for Vespa 125/150 PX-Sprint-rally
Vespa 125 PX VNX1M> 2M
Vespa 125 TS VNL3M
Vespa 125 Cosa VNR1>2T
Vespa 150 PX VLX1M
Vespa 150 Sprint Veloce VLB1M
Vespa 150 Cosa VLR1T
Vespa 180 Rally VSD1T
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
In rubber, black color
Air filter maintenance kit Vespa 160 GS 2° VSB1T 0029901 ->/180 SS
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Kit composed of gasket and pad for air filter, designed to effectively reduce waste loss during suction. Made of flexible polymer with high mechanical and chemical resistance, they ensure durability and reliability over time.
The gasket is precisely shaped to fit perfectly to the shape of the box, making installation simple and immediate, without the need for modifications.
Vespa 150 VL3T
Vespa 150 VB1T
In Steel, nickel-plated
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1T 3016725>
Vespa 200 Rally VSE1T
Vespa Cosa 1 Adaptable
Note: Original Piaggio
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Gas valve cable SI 20/20-24/24 carburetors for Vespa 125/150/180/200 Sprint V-PX-TS-GT-GTR-Rally
Vespa 125/150 Sprint V-PX-TS-PE-GT-GTR-Rally
For models without a mixer
Prisoner intake manifold fastening M6x30 for Vespa 50/125 N-L-R/Special/PK-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
DELL'ORTO air/fuel mixture screw for UB23 S carburetor Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
DELL'ORTO E21 floating needle for UB23 S carburetor Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
Cone pin clip of Orto MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Pinasco airbox purifier cover with MIX for Vespa Vespa 180-200 Rally/P80 -150X/P200E/PX80-200E/Lusso /`98/MY/`11/T5
Vespa 150 PX VLX1T
Vespa 200 Rally VSE1T Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
In plastic, 20% more volume, suitable for models WITH mixer
Floating pin clip of Garden MA/UA/UB23S3 for Vespa 125 VNA/150 VB/VL/GS
Vespa 125 VN2/VB/VL/VNA/150 VB/VL/GS
Sil-tech Performance air box filter for Dellorto SHBC 19.19 E carburetor
For Dellorto SHBC 19.19 E carburetor
The Dell'orto SHBC carburetor series features a cylindrical venturi duct, this shape is simple to manufacture but presents efficiency issues,
The Siltech Performance Venturi cone has been designed to address the problem of turbulence generated by the cylindrical cone. Through various simulations with different shapes, a form was developed that optimizes the airflow intake eliminating turbulence and significantly enhancing performance.
An interesting fact is that it is possible to mount the dedicated Siltech Performance air box or the Polini air box (203.0019).
Carburetor nozzle measurement and cleaning tool with 20 inserts (from 0.45 to 1.5 mm)
All models
Maximum jet for carburetors SI 20.15-17 A-D/20.20-24.24-26.26E/G/H/27.23
Vespa 50/90/125/150/160/180/200
Vespa 50/90/125/150/200
Polini air filter Ø39 short for carburetors PHVA/B-PHBN-PHBG-PHBL
Vespa 50/90/125/150/200
Ring OR clutch release lever/oil pump Ø 12x9x1.7 mm for Vespa 50/90/125/Primavera/ET3/PK50/125/S/XL- PX-PE
Vespa 50
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PX
Vespa PE
Intake manifold BGM PRO Ø24mm compatible with Dellorto PHBL24/25, Polini CP23/24- Vespa Wideframe 125cc Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
Vespa V1-V15, V30-V33, VN, VM, Vespa ACMA 125 (1951-1955)
Lamellar manifold to carter Falc 2 holes elastic fitting D.34/36/38/39 mm for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
It mounts without making modifications to the frame, also suitable for rotated cylinders
Lamellar manifold to the Falc 2-hole crankcase with elastic fitting D.30-35 mm for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
It mounts without making modifications to the frame, also suitable for rotated cylinders
1L Package
2T
Dellorto insulating reduction bushing for Vespa 125 Primavera VMA1T/VMA2T-ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Compatible with SHBC19:19 carburetors (23 mm manifold fitting)
Vespa 125 from 1960 (vnb1t>)
Vespa 150 from 1959 (vba1t>)
Vespa PX/PE
Vespa 180/200 Rally
5 Pcs Kit
Black fuel tap rod gasket for Vespa 50-125 PV/ET3/PK/S/XL/VNA-TS/150 VBA-T4/160 GS/180 SS/Rally/P80-150X/PX80-200E/Lusso 1°/P150S/P200E
Vespa 50
Vespa 90
Vespa 125
Vespa 125 PX VNX2T> 53219
Vespa 150
Vespa 150 PX VLX1T> 430974
Vespa 180
Vespa 200
Vespa 200 PE VSX1T> 138246
Black color
Vespa GTS/GTV/GT L 125/200ccm
Base gasket for fuel tap in FKM for Vespa V50/PV/ET3/125/GT/GTR/Super/TS/150 Sprint/V/Super/180/200 Rally/GS160/SS180/PK50-125/PX80-200/T5
All models except VM1>2T, V30>33T, VB1T
Thickness--> 3.5mm
Ø 33/23 mm
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
BGM rubber sleeve (d. 35-40) for Vespa 50/90/125/150/200 Special-N-L-R-PK-PX-Sprint-GL-TS
Cork fuel tap base gasket for all models except VM1>2T, V30>33T, VB1T, GS VS1T>5T
All models except VM1>2T, V30>33T, VB1T, GS VS1T>5T
Material: Cork