Vespa 125 N (FL) VMX7T
Pair of smoked rear light bodies (right and left) SIEM for Vespa 50/125 PK XL-N-Plurimatic-FL2-Rush
Vespa 50 PK XL
Vespa 50 PK XL Plurimatic
Vespa 50 PK N FL1 from 1989
Vespa PK 50 N Speedmatic (FL1) from 1989
Vespa PK 50 FL2 from 1990
Vespa PK 50 Rush
Vespa 125 PK XL
Smoked
Vespa 125 ETS VMS1T
Vespa 125 FL2 VMX7T
Engine type: 80-125ccm, Smallframe
Crankshaft type: Rotary valve
Stroke: 51 mm
Connecting rod: 97 mm
Connecting rod bearing: 15x19x20 mm
Piston pin Ø 15mm
Taper 24/25mm, M12
Ø Seal seat on alternator side: 24 mm
Ø Bearing seat on alternator side: 25 mm
Thread on alternator side: M12
Vespa 125 ETS VMS1T
Vespa 125 FL2 VMX7T
Engine type: 80-125ccm, Smallframe
Crankshaft type: Rotary valve
Stroke: 51 mm
Connecting rod: 97 mm
Connecting rod bearing: 15x19x20 mm
Piston pin Ø 15mm
Taper 24/25mm, M12
Ø Seal seat on alternator side: 24 mm
Ø Bearing seat on alternator side: 25 mm
Thread on alternator side: M12
Vespa 50/90/125
Pinasco Racing crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Valve type
All models
VERSION WITH LONG VISOR Extremely compact and lightweight demi-jet, it differs from the classic spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. It features fully removable and washable thermoformed interiors and is available with a long visor or with a shaped visor that share the fastening system. The 109X version is made with soft black interiors paired with black eco-leather finishes.
ECE-R 22.05 APPROVAL
SIZES: XS (53cm), S (55cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) XL (59cm)
AVERAGE WEIGHT SIZE M: 920 +/- 50 gr
HPT SHELL
ANTI-SCRATCH PAINT WITH DECAL
AIR STREAM SYSTEM
LONG ANTI-SCRATCH VISOR
INTERCHANGEABLE VISORS
REMOVABLE INTERIORS
REMOVABLE CHEEK PADS
HEXAGONAL THERMOFORMED INTERIORS
Helmet 1T TIKI MONO matte green with ventilation net on black shell
Compact and lightweight jet helmet, the 1T helmet is ideal for
facing the hotter seasons thanks to the large vents in the shell
that ensure air circulation inside the helmet. It features
colored metal nets, the vents can be easily covered
with the special covers included in the package. It also has
removable perforated interiors and an extra smoke retractable internal visor.
ECE-R 22.05 APPROVAL
SIZES: XS (53-54cm), S (55-56cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) L (58cm), XL (59cm)
AVERAGE WEIGHT SIZE M: 850 +/- 50gr
THERMOPLASTIC SHELL
ANTI-SCRATCH PAINT
FRONT VENTILATION
INTERNAL SUN VISOR
REMOVABLE INTERIORS
MICROMETRIC BUCKLE
ANTI-THEFT RING ON
Racing wheel rim in Aluminum Grey color for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/Rally/PX/PE/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
MaterialSteel
Size: 3.00/10-3.50/10
Includes M8 Nuts and grower washers
Complete Sport RDV race one V1.0 saddle in black with red stitching for Vespa 50/125 PK-S-XL
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (
The brand new sport saddle "RDV race one" V1.0 is a perfect blend
of sporty aesthetics (red stitching, sporty seat in harmony with the Vespa curves) and good comfort (plastic molded base with a metal core,
2.5 cm foam padding for the seat), innovative magnetic closure
to ensure the best aesthetic result, entirely designed and
conceived by our Staff, made possible with the technical support
of the company Nisa SRL. 100% MADE IN ITALY. well-defined and captivating shape!
Dexter Modern Box Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified Padellino PK / HP – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with a manifold internal diameter of 28 mm or 32 mm
-Less noisy than a Proma
-Original-like aesthetics (modern padellino style)
-Excellent torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with tires 3.00 R10 and 90/90 R10
-Slightly shorter manifold compared to the Classic Box to avoid interference with the bulkhead (further shorten-able if necessary
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
Complete saddle Sport RDV race one V1.0 in black color with white stitching for Vespa 50/125 PK-S-XL
Vespa 50 PK V5X1T
Vespa 50 PK S V5X2T
Vespa 50 PK S Elestart V5X2
Vespa 50 PK XLS V5S2T
Vespa 50 PK XL V5X3T
Vespa 50 PK XL Elestart V5X3T
Vespa 50 PK XL2/ Elestart V5X3T
Vespa 50 RUSH V5X4T
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 PK N V5X5T
Vespa 125 ETS VMS1T
Vespa 125 PK S VMX1T
Vespa 125 PK S VMX5T
Vespa 125 PK S Elestart VMX5T
Vespa 125 PK XL VMX6T
Vespa 125 PK XL Elestart VMX6T
Vespa 125 PK XL2 VMX6T
Vespa 125 N (
The brand new sport saddle "RDV race one" V1.0 is a perfect blend
of sporty aesthetics (white stitching, sporty seating in harmony with the Vespa curves) and good comfort (molded plastic base with a metal core,
2.5 cm foam for the seat), innovative magnetic closure
to ensure the best aesthetic result, entirely designed and
conceptualized by our Staff, made with the technical support
of Nisa SRL company. 100% MADE IN ITALY. Well-defined and captivating shape!
Buffer start-up Aries for Vespa 50 R 2°/S 2°/Special V5B3T 2°/SR 2°/90 2°/100/125 PV 2°/ET3 2°/PK50/S/SS/XL/2/FL/HP/Rush/PK80-125 S/PK125/ETS/N/XL/XL2
Vespa 50 V5A1T 893030>
Vespa 50 Special V5B3T 88658>
Vespa 90 V9A1T 141513>
Vespa 125 Primavera VMA2T 0148637>
Vespa 125 Primavera ET3 VMB1T 8091>
Vespa PK
Size: 20x24x9 mm
Variable quick throttle control pulley MOTORISTICA MERIDIONALE for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
There are 3 delivery modes: TOURING - SPORT - RACE.
Simply rotate the cam (grey) to the position of the arrow and corresponding letter.
In the following graph, the 3 selectable curves are present to be chosen optimally, based on the type of carburetor and usage.
VZR Vezzola Racing Coil Support Bracket and Regulator Kit for IDM Ignitions on SIP and Piaggio Crankcases for Vespa 50/125 PK HP
Vespa 50/125 PK-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient way.
Assembly instructions included.
Material: Stainless steel
VZR Vezzola Racing Coil Support Bracket Kit for Sip Vape Ignitions on SIP and Piaggio Engine Cases for Vespa 50/125 PK HP
Vespa 50/125 PK-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Black color. The "Termowarm" electric leg warmer panel is powered by a Power Bank and has a heating duration of approximately 1.5 hours (with a 5000 mAh power bank).
- Electric leg warmer panel
- Compatible with the Termoscud storage pocket
- Powered by Power Bank (not included) with a minimum capacity of 5000 mAh (5V/2A)
- High tenacity Oxford nylon exterior
- Internal aluminum layer to reflect heat towards the legs
- Back side in Aero 3D mesh to evenly distribute heat
- On/Off power button
- Power bank pocket
- Heating duration based on battery power (approx. 1.5h with 5000 mAh)
VMC tubeless aluminum rim in polished aluminum color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
100% synthetic high-performance lubricant specific for 2-stroke engines.
Very useful built-in measuring cup.
Front luggage rack Cuppini in black with headlight holder (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 50/90/125/150/160/180/200
Product 100% Made in ITALY
Cuppini front luggage rack in white with headlight mount (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 125/150/160/180/200
100% Made in ITALY Product
Vespa 50 PK/S/XL/N/HP
Vespa 125 PK/S/XL/N/HP/ETS
In galvanized steel
Vespa 50/90/125/150/180/200
Measurements--> Blind hole with diam. 17 mm, length 100 mm
All models
Valid for the mounting of one tire on a tubeless rim
By purchasing "TIREMOUNTING", a tire and a tubeless rim, you will receive the tire directly mounted on the rim at home. (for two rims/tires, purchase two "TIREMOUNTING")
VMC Tubeless 2.0 Easy Fitting aluminum rim in dark gray color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly easier, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical measure that makes a difference especially in practice, where mounting a tire can prove to be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with
VMC Tubeless 2.0 Easy Fitting aluminum rim in Aluminum Grey color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE/Lusso/T5/LML Star/DLX/Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can be long, tiring, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making the assembly accessible even to those who do not have daily experience with this
VMC Tubeless 2.0 Easy Fitting aluminum rim in black color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
A new step forward in the evolution of the tubeless rim for vintage Vespa: VMC 2.0 combines a completely renewed design with technical solutions designed to make assembly simpler, faster, and safer, without compromising style and reliability.
The new spokes, characterized by an exclusive profile and a refined diamond finish, create a sharp contrast with the rim's paint. A distinctive aesthetic detail, capable of enhancing the Vespa's look and making the VMC 2.0 immediately recognizable compared to other tubeless rims available on the market.
The real innovation, however, is found inside the rim, in the central channel.
A special internal groove facilitates the insertion of the tire bead during assembly, significantly reducing the time and effort required.
A technical feature that makes a difference especially in practice, where mounting a tire can prove to be long, laborious, and, in some cases, particularly problematic.
With the VMC 2.0, the operation becomes simpler, faster, and safer, making assembly accessible even to those who do not have daily experience with
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
SIP "Classic" bag/suitcase, large for luggage rack in olive green
480x300x270 mm
approx. 35 l
canvas
olive green
with lock
Large bag, for luggage rack,
480x300x270 mm,
Capacity 35l
Color black
Practical multi-pocket bag
Mounting on spare wheel for 8 and 10 inch wheels
Quick Throttle Disc pulley for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
Ø 50 mm
aluminum, CNC milled
silver anodized
short stroke, with hollow bushing
Brake pedal protection Vespa 50 R 2°/S 3°/Special V5B3T 2°/90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50 V5A1T 914748 >
Vespa 50 Special V5B3T 230536 >
Vespa 90 V9A1T 184927 >
Vespa 125 Primavera VMA2T 0192145 >
Vespa 125 Primavera ET3 VMB1T 52721 >
Vespa 90 V9B1T 5363 >
Vespa PX
Vespa PE
Vespa PK
50x38x24 mm
Shockproof brake pedal gasket for Vespa 50 R 2°/S 3°/Special V5B3T 2°/90/125 Primavera 2°/ET3 2°/PK50/125/S/XL//PX80/125/150/200/PE/T5/'98/MY/'11
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Prisoner for drum Vespa 50 N/L/R-Special-90-125 Primavera-PX-Sprint-GT-GTR-TS-Rally-SS
Vespa 50/90/125/160/180/200
Measurements: M 8 x L 30 mm
Upper steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Vespa 125/150/200 Cosa
Complete
Lower steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete with dust washer