Vespa 125 PX E Arcobaleno VNX2T
Front optical group with Led Grabor "original version" for Vespa PX80-200/PE/Lusso/'98/MY/'11
Vespa PX80-200/PE/Lusso/'98/MY/'11
The LED projector has a brightness three times higher than an original PX optical unit (1300 lumens). The power consumption is only 20 W. This corresponds to the luminous efficiency of a conventional 100 Watt spotlight.
Warning: the high beam is much weaker compared to the low beam
All models
VERSION WITH LONG VISOR Extremely compact and lightweight demi-jet, it differs from the classic spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. It features fully removable and washable thermoformed interiors and is available with a long visor or with a shaped visor that share the fastening system. The 109X version is made with soft black interiors paired with black eco-leather finishes.
ECE-R 22.05 APPROVAL
SIZES: XS (53cm), S (55cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) XL (59cm)
AVERAGE WEIGHT SIZE M: 920 +/- 50 gr
HPT SHELL
ANTI-SCRATCH PAINT WITH DECAL
AIR STREAM SYSTEM
LONG ANTI-SCRATCH VISOR
INTERCHANGEABLE VISORS
REMOVABLE INTERIORS
REMOVABLE CHEEK PADS
HEXAGONAL THERMOFORMED INTERIORS
Helmet 1T TIKI MONO matte green with ventilation net on black shell
Compact and lightweight jet helmet, the 1T helmet is ideal for
facing the hotter seasons thanks to the large vents in the shell
that ensure air circulation inside the helmet. It features
colored metal nets, the vents can be easily covered
with the special covers included in the package. It also has
removable perforated interiors and an extra smoke retractable internal visor.
ECE-R 22.05 APPROVAL
SIZES: XS (53-54cm), S (55-56cm), M (57cm), L (58cm), XL (59cm)
SIZES: (continued) L (58cm), XL (59cm)
AVERAGE WEIGHT SIZE M: 850 +/- 50gr
THERMOPLASTIC SHELL
ANTI-SCRATCH PAINT
FRONT VENTILATION
INTERNAL SUN VISOR
REMOVABLE INTERIORS
MICROMETRIC BUCKLE
ANTI-THEFT RING ON
MITAS MC34 56P TL Road Tire (100/90/10) Vespa 125/150/160/180/200 for Vespa Sprint-GL-GTR-TS-PX-Rally-Ape 50
Vespa 125 GT(not standard)
Vespa 125 GTR(not standard)
Vespa 125 TS VNL3T(not standard)
Vespa 150 GS VS1>5T(not standard)
Vespa 150 GL(not standard)
Vespa 150 Sprint VLB1T(not standard)
Vespa 150 Sprint Veloce VLB1T(not standard)
Vespa 160 GS VSB1T(not standard)
Vespa 180 SS VSC1T(not standard)
Vespa 180 Rally VSD1T(not standard)
Vespa 200 Rally VSE1T(not standard)
Vespa PE(not standard)
Vespa PX (not standard)
Vespa 125/150/200 Cosa
Vespa PX 80
Vespa PX 125
Vespa PX 150
Vespa 200 PE
Two-seater, sheet metal bottom, with lock
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
Dimensions: 2.10x10''
Polini HT FOR RACE clutch gear Z 24 for primary Z64 straight teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Vespa 80 PX
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa Rainbow
Double-acting gas oleo-pneumatic shock absorber with spring preload
adjusted by aluminum micrometric ring, calibrated harmonic steel spring.
Body: black, spring: red
Rear shock absorber YSS-ECO LINE gas for Vespa 125/150/160/180/200 N-L-R-Special-Primavera-GT-GTR-Sprint-Rally-PX-PE
Vespa 125 VNB4T 114714 >
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 VBB2T 172370 >
Vespa 150 GL VLA1T
Vespa 150 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Vespa PX Arcobaleno
Gas double-acting oleo-pneumatic shock absorber with spring preload
adjusted by a millimetric aluminum ring, calibrated harmonic steel spring.
Aluminum body and black spring
Upper Attachment--->M9
Length: 345 mm
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
The toy is self-propelled. This means that the "engine" is the driver themselves! This keeps girls and boys very active, while also promoting their neural development of motor skills and coordination.
The main specifications are as follows:
- Product dimensions: 76cm in length, 30cm in width, 43cm in height (handlebar) and 32cm in seat height
- Product weight: 5.9 kg.
- Recommended age: 1-5 years
- Maximum allowed weight: 20 kg (limit due to lack of brakes, not stability or quality).
Venturi intake cone in aluminum MOTORISTICA MERIDIONALE for SI 28 Carburetors Vespa 200 Rally/P200E/PX200 E-Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 200 Rally/P200E/PX200 E
Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
The Venturi for SI 28 carburetors is designed to improve engine performance without compromise. Combined with an enlarged airbox, the performance will be significantly increased. The 6061 ALUMINUM material ensures eternal durability. Each venturi is polished to reduce surface roughness. To reduce turbulence in the venturi, a thread reduction system from M5 to M3 has been adopted.
No risk of screw loss. Thanks to a thread reduction system, the screws are constrained by the reductions themselves, locked with Loctite. This system allows for maximum safety and maximum flow.
Venturi intake cone in aluminum MOTORISTICA MERIDIONALE for SI 24 SI26 Carburetors Vespa 200 Rally/P200E/PX200 E-Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 200 Rally/P200E/PX200 E
Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
The Venturi for carburetors SI 24 - 26 / G T5 is designed to improve the engine's performance without compromises. Its ultra-compact shape makes it super efficient even with low air-boxes. The 6061 ALUMINUM material ensures eternal durability. Each venturi is polished to reduce surface roughness. A threading reduction system from M5 to M3 has been adopted to reduce turbulence in the venturi. It is compatible with PX-T5 type carburetors.
No risk of screw loss. Thanks to a threading reduction system, the screws are constrained by the reductions themselves, locked with Loctite. This system allows for maximum safety and maximum flow.
Variable quick throttle control pulley MOTORISTICA MERIDIONALE for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
There are 3 delivery modes: TOURING - SPORT - RACE.
Simply rotate the cam (grey) to the position of the arrow and corresponding letter.
In the following graph, the 3 selectable curves are present to be chosen optimally, based on the type of carburetor and usage.
Black color. The "Termowarm" electric leg warmer panel is powered by a Power Bank and has a heating duration of approximately 1.5 hours (with a 5000 mAh power bank).
- Electric leg warmer panel
- Compatible with the Termoscud storage pocket
- Powered by Power Bank (not included) with a minimum capacity of 5000 mAh (5V/2A)
- High tenacity Oxford nylon exterior
- Internal aluminum layer to reflect heat towards the legs
- Back side in Aero 3D mesh to evenly distribute heat
- On/Off power button
- Power bank pocket
- Heating duration based on battery power (approx. 1.5h with 5000 mAh)
VMC tubeless aluminum rim in polished aluminum color 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL /XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE /Lusso/T5/LML Star/DLX /Deluxe 2T/4T
Vespa 50/80/90/125/150/160/180/200
Measurement--> 2.10-10" with pre-installed valve
Usable with tires: - 3.00 x 10 - 3.50 x 10 - 90/90-10
100% synthetic high-performance lubricant specific for 2-stroke engines.
Very useful built-in measuring cup.
Piaggio Gear 4th Gear 35 teeth for Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Front luggage rack Cuppini in black with headlight holder (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 50/90/125/150/160/180/200
Product 100% Made in ITALY
Cuppini front luggage rack in white with headlight mount (not included) for Vespa 125/150/180/200 Sprint-GL-PX-Rally180, Vespa Rally200, TS125, GT125, GTR125-/-PE
Vespa 125/150/160/180/200
100% Made in ITALY Product
Vespa 125/150/200 PX-PE Rainbow
All models
Valid for the mounting of one tire on a tubeless rim
By purchasing "TIREMOUNTING", a tire and a tubeless rim, you will receive the tire directly mounted on the rim at home. (for two rims/tires, purchase two "TIREMOUNTING")
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
For Grimeca disc brake kit
Material--> Aluminum
Color--> Red anodized
Ø 31.5 mm
with approval KBA 61358
Original Piaggio air filter for Vespa 125/150 PX-Sprint-rally
Vespa 125 PX VNX1M> 2M
Vespa 125 TS VNL3M
Vespa 125 Cosa VNR1>2T
Vespa 150 PX VLX1M
Vespa 150 Sprint Veloce VLB1M
Vespa 150 Cosa VLR1T
Vespa 180 Rally VSD1T
SIP "Classic" bag/suitcase, large for luggage rack in olive green
480x300x270 mm
approx. 35 l
canvas
olive green
with lock
Large bag, for luggage rack,
480x300x270 mm,
Capacity 35l
Color black
Practical multi-pocket bag
Mounting on spare wheel for 8 and 10 inch wheels
Quick Throttle Disc pulley for Vespa PK50-125 S/SS/Lusso/XL/ETS/Rush/N/PX80-200/PE/Lusso/'98/MY/'11/T5/Cosa 1
Vespa 50 PK
Vespa 50 PK XL
Vespa 50 PK Rush
Vespa 50 PK N
Vespa 125 PK
Vespa 125 PX T5
Vespa 125 PX
Vespa 150 PX
Vespa 200 PX
Vespa 125 T5
Ø 50 mm
aluminum, CNC milled
silver anodized
short stroke, with hollow bushing
Pair of original SIEM light bodies (right and left) for Vespa 80/125/150/200 PX-PE-My-2011-LML
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 ETS
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Brake pedal protection Vespa 50 R 2°/S 3°/Special V5B3T 2°/90 3°/100 2°/125 PV 3°/ET3 2°/PK50-125/S/XL/XL2/PX80-200/PE/Lusso/'98/MY/'11/T5
Vespa 50 V5A1T 914748 >
Vespa 50 Special V5B3T 230536 >
Vespa 90 V9A1T 184927 >
Vespa 125 Primavera VMA2T 0192145 >
Vespa 125 Primavera ET3 VMB1T 52721 >
Vespa 90 V9B1T 5363 >
Vespa PX
Vespa PE
Vespa PK
50x38x24 mm
Shockproof brake pedal gasket for Vespa 50 R 2°/S 3°/Special V5B3T 2°/90/125 Primavera 2°/ET3 2°/PK50/125/S/XL//PX80/125/150/200/PE/T5/'98/MY/'11
Vespa 50 V5A1T 914748>
Vespa 50 Special V5B3T 230536>
Vespa 90 V9A1T 184927>
Vespa 125 Primavera VMA2T 0192145>
Vespa 125 Primavera ET3 VMB1T 52721>
Vespa 125 PX
Vespa 150 PX
Vespa 200 PE
Vespa 50/125 PK
Prisoner for drum Vespa 50 N/L/R-Special-90-125 Primavera-PX-Sprint-GT-GTR-TS-Rally-SS
Vespa 50/90/125/160/180/200
Measurements: M 8 x L 30 mm
Upper ring for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 VM/VN/VNA-TS/150 VL/VB/GS/VBA-T4/160 GS/180 SS/Rally/PX80-200/PE/Lusso/'98/MY/'11
Galvanized
Upper steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98 /MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Vespa 125/150/200 Cosa
Complete
Lower steering bearing group Piaggio for Vespa 50-125/PV/ET3/PK50-125/S/SS/XL/125 GT-TS/150 Sprint/V/Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/´98/MY/´11/T5/Cosa
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T>3T
Vespa 50 Special V5B1T>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PX
Vespa 125 GT/GTR/TS/Super
Vespa 150 PX
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T
Vespa 200 Rally VSE1T
Vespa 200 PE
Vespa PK (All)
Complete with dust washer
Kickstand spring attachment plate for Vespa V50/PV/ET3/160GS/180SS/PX/T5
All Models
Galvanized Finish
Spacer buffer for fender mounting premium version Ø 18x6.4x5 mm for Vespa 50/90/125/150/200
All models - Tutti i modelli
Smoked front and rear light body kit SIP for Vespa 125/150/200 PX-PE
Vespa PX 80
Vespa PX 80 E Arcobaleno
Vespa PX 100
Vespa PX 100 Arcobaleno
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Arcobaleno
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Arcobaleno
Vespa P 200 E
Vespa P 200 E Arcobaleno
Vespa 125 PK S VAM1T Automatic
Glass: colored black
without bulbs
without gasket
Approval: with E number