Vespa 150
Pair of SIP vintage style grips Ø 22/22 mm l=125 mm for Vespa 125 VNB 3-6/150 VB1/VBA/VBB/VGL1/VGLA-B/150 GS VS2-5/160 GS
Vespa 125 VNB 3-6/150 VB1/VBA/VBB/VGL1/VGLA-B/150 GS VS2-5/160 GS
PIAGGIO quadrangle
for handlebar tube Ø 22/22 mm
l=125 mm
gravel gray RAL 7032, Patina
premium quality
Tachometer/odometer SIP TACHO KARACHO for Vespa P80-150X /PX80-200E/Lusso 1°/P150S /P200E - 160 (km/h/mph) / 16,000 (Umin/rpm)
Vespa 125/150/200 PX-PE
The SIP TACHO KARACHO is a tachometer with a SIP PERFORMANCE rev counter for Vespa PX80-200 E Lusso/'98/MY/'11, also suitable for Vespa GTV/GT 60 from 125 to 300 cc.
Since their introduction in 2010, SIP tachometers with a speedometer have radically changed the market. Functions that were previously only achievable through the installation of numerous additional devices have now been combined into one instrument, and discreetly.
Available in 100 MpH and 160 km/h versions
Racing optics
Analog and digital display possible
The "Tacho Karacho" version, with the needle hanging at 6 o'clock, is reminiscent of the instruments of sports and racing cars from the '60s and '70s. Besides RPM and speed, this speedometer can also display temperature. It offers the ability to easily switch from AF to EGT connection in the menu.
A small push button allows an elegant switch between different displays. It can be mounted discreetly above or below the light switch. A little extra treat: every time you start the engine, the rev
All Models / Tutti i modelli
Anchoring to the shield
round
Ø 100 mm
stainless steel/polished aluminum
Patina
SIP Stadium left rearview mirror with trapezoidal shield for all Vespa models
All models / Tutti i modelli
trapezoidal shape
Ø 100 mm
stainless steel/polished aluminum
Patina
Bakelite base rectifier support for Vespa 150 GS VS1->VS5->60122
Vespa 150 GS VS1->VS5->60122
Bakelite base support rectifier for Vespa 150 GS VS5-60122>127350
Vespa 150 GS VS5T 60122>127350
Vespa 160 GS VSB1T
Suspension spring cover for Vespa 125/150 VM2-VN1-VN2-VNA-VNB-VB1-VL1-VBA
Vespa 125 VM2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VB1T
Vespa 150 VL1>3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
l=155 mm
black, Patina
hardness: M, 25% harder
SIP Tubeless Full Wheel Rim Gray Patina (3.50/8) for Vespa 98/125 V1-15/V30-33/VU /VM/VN/VNA/Hoffmann/VNB/ACMA /150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
2.15 Ø 8"
closed
aluminum
patina gray
4 holes
CARLUCCI air filter for carburetor TA 18C/D/E for Vespa 125 VM/150 VL
carburetor TA 18C/D/E for Vespa 125 VM/150 VL
Vespa PX disc brake
Vespa PX/PE Arcobaleno (With Electric Start)
In painted metal of gray color
For models with Electric Start
Thickness POLINI tray for carburetor SI 20:20-24:24-26:26 for Vespa 125/150/200
Vespa 125/150/200
For SI carburetors
Carburetor cover "AT design prototypes" for PHBH 28/30 carburetor
for PHBH 28/30 carburetor
All Models
Vespa 150 VB/VL
Gear selector pivot for Vespa 125 VNB5-6T-TS/150 VBB-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa 1
Vespa 125 VNB5-6T-TS/150 VBB-Super/160 GS/180 SS/Rally/PX80-200/PE/Lusso/T5/Cosa 1
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
plastic
black
for the safe maintenance of candles <- Ø 18mm
Children's electric Vespa GTS 300 Super 12V scooter in red color
l=1020 mm
l=500 mm
a=750 mm
red
with battery
1 speed stage (2 km/h) / forward-stop-reverse switch
l=1020 mm
l=500 mm
a=750 mm
white
with battery
1 speed stage (2 km/h) / forward-stop-reverse switch
Flywheel side crankshaft oil seal "ROLF" 24X35X6 mm for Vespa 125/150/200 PX
Vespa PX/PE
Vespa ETS
Ref.Orig: 158962
All Models
For roof rack anchoring
Silent-block engine crossbar MD Racing black (soft) stainless steel/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
Reinforced silent blocks for greater driving stability, mount dry (at most with the help of talcum powder).
WARNING-->Directional silent blocks, must be mounted according to the direction of travel
in the following way: Left travel direction: red mark,
right travel direction: green mark.
VHSH carburetor
VHSH carburetor
Original type battery box cover for Vespa 125/150 VNB1T-VB-GL-VBA
Vespa 125 VNB1T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 GL VLA1T
Vespa 150 VL3T
All models
The ignition timing is important for the thermal health of the
engine and for delivering all the power. If the
engine is rebuilt, you should not rely on existing marks for
ignition adjustment, but measure it personally. This is
easily possible with this electronic timing gun for
gasoline engines with contact or transistor ignition system
(CDI ignition as in series with ET3, PK, PX, PX, Cosa, T5, etc.) The 6 and 12 volt ignitions can be adjusted at both 6 and 12 volts. Note:
It doesn't matter if the ignition is 6V or 12V, an external 12 Volt power source (e.g., a car battery) is always needed if the
vehicle doesn't already have one.
A super bright xenon tube and a special converging lens ensure optimal visibility of fixed markers even at speeds over 8000 rpm in the near field.
The gun is connected to a 12 volt battery via the alligator clips and the inductive clip on the spark plug cable (without direct contact with the wire)
Vespa 50/80/90/125/150/180/200
round
Ø 110 mm
chrome
bar length: 85mm
thread: M10
glass adjustable from the inside with approval mark and
Decomposable "RUSH" Aluminum Rim in Black 2.10/10 for Vespa 50-125/PV/ET3/PK/S/XL/XL2/125 GT-TS/150 GL/GS VS5T/Sprint/V/T4/Rally/PX/PE
Vespa 50 V5B1>3T
Vespa 50 V5SS1>2T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 GS VS5T 0047351>
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PX
Vespa PE
Included: Chrome nuts and valve
O-ring kit for tubeless rim closure
Dimensions: 2.10x10''
All models
Graduated measuring cup for oil mixture 2% scale for liters/gallon without lid
Plastic
Graduated scale for 2% mixture
Tutti i modelli
Size: 7x12 mm
Vespa 125/150 V1>33T-VM-VN-LL-VBB-VNB
Dimensions: Ø 17x12x2.68 mm
Orig.Ref: 15982
Hood support spring (2pcs.) for Vespa 125 V1>15T/V30>33T/VM/VN-150 VL1>3T/VB1T
Vespa 125 V1T>15T, Vespa 125 V30>33T, Vespa 125 VM1>2T, Vespa 125 U VU1T, Vespa 125 VN1>2T, Vespa 150 VL1>3T
Starter command transmission in harmonic steel for Vespa 125 VM1T>2T, Vespa 150 VL1T>2T
Vespa 125 VM1T>2T, Vespa 150 VL1T>2T
In harmonic steel
Vespa 125 VM1T>2T Adaptable (Originally in aluminum)
Vespa 125 VN1T>2T
Vespa 150 VL1T>3T Adaptable (Originally the left side panel was equipped with a lock)
Finish: Raw
Material: Steel
Original type battery box (empty) for Vespa 125/150 VNB1T-VB-GL-VBA
Vespa 125 VNB1T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1T
Vespa 150 GL VLA1T
Vespa 150 VL3T
Vespa 150 PX Elestart
Compatible with our article: 02-CX-009-FA
Vespa 150 VL2T>3T
Vespa 150 VB1T
Vespa 150 GS VS2T>VS4T
Vespa 150 GL VGL1T
Speedometer mounting bolt with slotted head for Vespa 50 Special
Vespa 50 Special (all)
In yellow anodized metal
total length mm 50.8