Vespa 150
Lamp 9/32V Mega-LED 2 BA20D 680 lm with built-in resistor
Complete LED headlight assembly EVOK for Vespa 125 GT/150 GL/Sprint/180 SS
Vespa 125 GT VNL1>2T
Vespa 150 GL
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
Faro Evok Iron Led for Vespa GL-Sprint-180 SS The headlight for Vespa GL-Sprint-180 SS has been designed and created specifically for the handlebars of the Vespa GL-Sprint-180 SS. It mounts Plug&Play using the connectors of the original headlight and works with both alternating and direct current. The cable colors match the colors of the original system. The headlight has two light combinations: - Low beam and position - Low beam, high beam, and position
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa GL, GT, Sprint v2
LED conversion kit for Vespa GL, GT, Sprint (trapezoidal headlight), composed of:
12 V DC voltage regulator;
rear position and stop LED bulb;
dual-filament bulb (3000±50 actual lumens) with LED position, paired with a custom-made bulb holder.
The product is perfectly compatible with both the original ignition and 12 V electronic ignition and must be mounted with a 12v 4.5 Ah battery (or higher capacity), which will be charged with the engine running using the supplied voltage regulator: this allows the use of lights and services even with the engine off, greatly increasing comfort.
The bulb holder has been designed to offer the best possible performance on the original headlight without any physical modifications, perfectly optimizing the light beam projection areas: to mount it, simply place it in the original's position and connect it to the vehicle's electrical system.
Jaw holder plate for Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm- PK50-125/S/SS/XL/XL2/Automatic
Vespa 80/125/150/200 PX-PE 2nd series pin Ø 20 mm
Vespa 125 PX E VNX2T 1115>
Vespa 150 PX E VLX1T 346430>
Vespa 200 PX E VSX1T 112624>
Vespa PK50-125/S/SS/XL/XL2/Automatic
Needle bearing clutch kit for VESPA 98 125 frame V1T to V15T frame V30T to V33T VM VU1T Utilitaria VN VESPA ACMA 150 VL1T VL2T VL3T VB1 HOFFMANN
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VU1T
Vespa 125 VN1>2T
Vespa ACMA
Vespa HOFFMAN
Vespa 150 VL1>3T
Vespa 150 VB1T
Measurements: Diam. 2.5 mm x 15.8 mm
29 pieces
Galvanized brackets for fixing canister/bag on platform for Vespa 125/150/160/180/200
All models
Original SIEM tail light for Vespa 125 VNB1-5/150 VBB/GS VS5/160 GS
Vespa 125 VNB1>5T
Vespa 150 VBA1T 110486>
Vespa 150 VBB1>2T
Vespa 150 GS VS5T 0087590 >
Vespa 160 GS VSB1T
Included screw for fixing
3506 IGM 0438 AR - 3515 IGM 0439 LPX
Vespa 125 VNB1T 032100 >
Vespa 125 VNB2T>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T 112180 >
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GS (Adaptable-Adapdable)
Vespa 160 GS VSB1T (Adaptable-Adapdable)
Vespa 180 Rally VSD1T
Vespa 180 SS VSC1T (Adaptable-Adapdable)
Vespa 200 Rally VSE1T
Included Base Gasket
Carbon cooling shroud side spark plug for Vespa PX80/125/150/PE/Cosa
Vespa 125/150 PX
Made from high-quality carbon fiber, it offers a glossy (or matte, as per the customer's choice) finish provided by 3 layers of UV-resistant clear coat. Where necessary, there are carbon/kevlar reinforcements to further ensure resistance to potential impacts. Compatible with original and standard products. Completely made in Italy.
Complete strip kit for platform for Vespa 80/125/150/200 PX-PE 1st Series
Vespa 80 PX V8X1T >30160
Vespa 125 PX VNX1T
Vespa 125 PX VNX2T >44000
Vespa 150 PX VLX1T >410580
Vespa 200 PE VSX1T >138292
2.5X13.8mm
Pinasco Tubeless polished aluminum full wheel rim (3.50/8) for Vespa 98/125 V1-15/V30-33/VU /VM/VN/VNA/Hoffmann/VNB/ACMA /150 VL/VB/VBA/VBB
Vespa 125 V31>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 150 VL1>3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Includes nuts and washers
Chrome fan cover for Vespa 80/125/150/200 PX-PE without electric start
Vespa PX
Vespa PE
In chrome-plated metal
Pair of light and indicator bulbs for Vespa P80-150X/PX80-200E/P200E
Vespa PX until 1983
Vespa PE until 1983
Complete with Lamps and lamp holders
Green and Orange
Pair of black brake and clutch levers for Vespa 50-125 PK S-XL-N-HP
Vespa 50 V5A1T 885554 > 905288
Vespa 50 S V5SA1T 68088 > 74588
Vespa 50 Special V5B3T 69809 > 95877
Vespa 50 Special V5B3T 96378 > 146856
Vespa 50 Elestart V5B4T
Vespa 125 Primavera VMA2T 140507 > 172801
Vespa 125 Primavera ET3 VMB1T 3306 > 24054
Vespa 150 Super VBC1T 292116 > 356828
Black in color
Rear wheel drum FA Italia (30 mm oil seal) for Vespa 125/150/200 PX Arcobaleno/adaptable to LML
Vespa PX Rainbow
Vespa PE Rainbow
Hub oil seal fitting diameter: 30 mm
Pinasco high-speed crankshaft bearing (oversized +0.04mm) for Vespa 125/150 VM-VN-VNA-GT-GL-TS-VL-VBA-VBB-VB1-Sprint-PX
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa 180
Vespa PX
Vespa PE
Dimensions: 25x62x12 mm
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
plastic
blue
for the safe maintenance of candles <- Ø 18mm
Light brown wicker storage basket with lid -47x31x25cm- scooter, vespa, mopeds
All Models / Tutti i modelli
Brown
10
For tires 3.00x10, 3.50/10
Vespa 125/150/200 PX-PE
Front luggage rack with gasoline can holder (can included)
All up to model PX / All Models >PX
Included Ties and pads for fixing
Note--> 5-liter CANISTER INCLUDED
Front luggage rack with gasoline can holder (can not included) for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
All up to model PX / All Models >PX
Including tie rods and pads for fastening
All Models / All Models
Note: Soft type
Measurements: Diameter 7 mm, length 58 cm
Black MONO NOSTRA 5-line kickstart pedal for Vespa 125 VNB/GT/GTR/TS-150 VBB2/GL/Super/Sprint
Vespa 125 VNB4T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 VBB2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
5-line graft
our codes:
Thermal Group Parmakit "TSV ECV"
- aluminum cylinder Ø 63
- SINGLE ELLIPTICAL EXHAUST
- cast head with side spark plug hole
- Vertex piston with TWO steel rings
- gasket set for variable timing.
DIAMETER: 63
DISPLACEMENT: 177
PIN: 15
STROKE: 57
ROD: 105
TRANSFERS: 5
Purifier filter for Vespa 125 VNB/GT/GTR/Super-150 Sprint/Super/GL
Vespa 125 VNB2>5T
Vespa 125 VNB6T> 028905
Vespa 125 GT VNL2T
Vespa 125 Super VNC1T
Vespa 125 GTR VNL2T
Vespa 150 Sprint VLB1M> 012664
Vespa 150 Super VBC1M
Vespa 150 VBB2M> 263795
Vespa 150 GL VLA1M
Symmetrical double light bulb 12V 25/25W socket: BA20d for Vespa 125/150/180/200 VNB-TS-Sprint-Rally/APE TM 602 703
Socket: ba20d
Base: ba20d
Base: ba20d
ba15s base
Vespa 50/90/125/150/200 PX-Special
SIP license plate holder, for German license plate, rear all models
All models
180x200 mm
Material: plastic
black
Original PIAGGIO battery compartment for Vespa ET4/LX/LXV/S 50-150ccm
Vespa ET4/LX/LXV/S 50-150ccm
152x88x90 mm
low, for YB9-B
Flywheel side crankshaft seal Malossi in FKM 24X35X6 mm for Vespa 125/150/200 PX
Vespa PX/PE
Vespa ETS
Vespa 150 GL VLA1T
Vespa 150 GS VS1>5T
9-principle pinion
Fine frame (2 mm)
White
Vespa 50/90/125/150/200 PX-Special