Vespa 150
Oil can support - luggage rack for internal shield right and left side -RDV- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, such as Sprint, V50, Primavera, VNB, VBB etc.
Black powder-coated steel, attractive honeycomb design.
Includes rubber with which you can, for example, attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
SIP 70's Chrome Rear Luggage Rack for Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/160 GS 2°/180 SS/Rally
Vespa 125 VNB4-6/GT/GTR/TS/Super/150 VBB2/GL/Sprint/V/160 GS 2°/180 SS/Rally
Dimensions: 30x20 cm
Carburetor gasket kit for Vespa 125 V1>15T-V30>33T-VM1>2T-VN1>2T-/150 VL1>2T
Vespa 98
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>2T
For carburetors TA17/A,B,TA18C/D/E,TA19C
3 Pcs.
Silent-block engine crossbar Dexter racing (soft) in aluminum/polyurethane, for original Piaggio engine casings for Vespa 125/150 TS-GT-GTR-VNA-VNB-VBB-VBA-GL-PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Super
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 125 PX First series
Vespa 150 PX First series
-rubber pads with calibrated hardness of your choice
-4 shims for load calibration during assembly
-threaded aluminum tubes for very easy assembly
DEXTER racing exhaust for Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
Vespa 125 GT/GTR/TS/150 GL/Sprint/V/PX80-150/PE/Lusso/Cosa 1
-exhaust for Vespa PX with 177/190 cylinders both cast iron and aluminum
-excellent performance from low revs
-fits with center stand and spare wheel
Base gasket for speedometer in grey color for Vespa 125 GT/150 Sprint-GL-VBA-VBB/160 GS/180SS
Vespa 125 GT VNL2T, Vespa 150 Sprint VLB1T, Vespa 150 VBA1T, Vespa 150 VBB1T > VBB2T, Vespa 150 GL VGLA1T, Vespa 150 GL VGLB1T, Vespa 150 GS Vespa 160 GS
In rubber, color grey
Engine gasket kit for Vespa 125 GTR/TS/PX-150 Sprint V/PX
Vespa 125 GTR VNL2T 145901>
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce 294260>
Vespa 150 Super VBC1T 412374>
Vespa 80 PX V8X1T
Vespa 125 PX VNX1>2T
Vespa 125 Cosa VNR1T
Vespa 150 Cosa VLR1T
Vespa 150 PX VLX1T
Stage 6 F1 Carbon Look Glossy Rearview Mirror (SX) for Vespa 50/90/125/150/180/200
Vespa 50/80/90/125/150/180/200
Threading M8x20
Crankshaft oil seal with square notch flywheel side CORTECO 20x40x6 mm for Vespa 125 VNA2 2°/VNB/GT/GTR 1°/Super/TS 1°/150 VBA 2°/VBB/VGLA/B/GL/Super 1°/Sprint/V 1°
Vespa 125/150
Starter gear spring for Vespa 98/125/150 V1>15T/V30>33T/VM/VN/VL/VB
Vespa 98, Vespa 125 V1T > V15T, Vespa 125 VN1T> VN2T, Vespa 125 VM1T > VM2T, Vespa 125 V30T > V33T, Vespa 150 VL1T > VL3T, Vespa 150 GS VS1T > VS3T
Chrome tubular Shield Edge (Accessory) for Vespa 125 GT/GTR/Sprint/Super
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Fastening with screws
Optical group glass locking ring for Vespa 125 Primavera ET3/Super-150 Super
Vespa 50 Super Sprint V5SS1T, Vespa 90 Super Sprint from '66 V9SS1T, Vespa 125 Super VNC1T, Vespa 125 VMA1T>VMA2T, Vespa 125 ET3 VMB1T from '76, Vespa 150 VBC1T from '65
Zinc-plated ring
Rear sheet metal central tunnel Carlucci for Vespa 125 VNA/VNB/GT/GTR/TS-150 VBA/VBB/GL/Sprint/PX/Rally/SS
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Width: 22/26 cm Height: 7/10.8 cm
Already welded on the joint
Carburetor cover "AT design prototypes" KEIHIN PWK 33-35-38-39-41
For KEIHIN PWK Carburetor 33-35-38-39-41
Carburetor cover hinged horizontally and vertically (to avoid abnormal tensions on the throttle cable)
Complete BGM PRO stator for Vespa Sprint150 (VLB1T), TS125 (VNL3T), GT125 (VNL2T), GTR125 (VNL2T), Super, GL150 (VLA1T)
Vespa 125 VNB3T>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 125 TS VNL3T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
6 volt alternating current, 3 coils, 5 wires (green-black-red-yellow-blue)
Warning--> Only for models WITHOUT battery
VHSB 37 DS flat valve
External high voltage coil for Vespa 125 Primavera ET3/PK- Rally 2°/PX80/125/150/200/PE/T5/Cosa-APE 50
Vespa 125 Primavera ET3 VMB1T
Vespa 125/150/200 PX/PE
Vespa 200 Rally VSE1T 0033997>
Ape 50
For needleless devices
Economic Version/Economy Type
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
Elastic support for BGM PRO shock absorber for Vespa 50/90/125/150/200 PX-PE-Sprint-GT-GTR-TS
Vespa 50, Vespa 90, Vespa 125 from 1958, Vespa 150 from 1958 (excluding Vespa 150 GS), Vespa 160, Vespa 180, Vespa 200
PINASCO unit conversion from points to electronic for Vespa 50 N/L/R-Special-125 Primavera/Sprint-Super-GT/GTR/TS/Rally/SS/LML
Models with points ignition
For conversion to electronic ignition
Pinasco has developed a control unit that converts engines with point ignition into engines with electronic ignition without having to replace the original components. By removing the capacitor and connecting the control unit in parallel with the original high voltage coil, it is possible to perform the conversion without invasive modifications to the engine or the electrical system; the points are not removed, they become the pick-up signal.
Vespa 50 V5A1T 236001>283299
Vespa 50 V5A1T 580001>
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>2T
Vespa 50 Special V5B3T>207316
Vespa 50 Special V5B4T
Vespa 50 V5SA1T 34201> V5SS2T
Vespa 90 V9A1T 31301>
Vespa 90 V9SS2T
Vespa 125 GT 62685>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA2T 028960>
Vespa 125 Primavera ET3 VMB1T > 44965
Vespa 150 Super VBC1T 73780>
Vespa 150 Sprint VLB1T 077175
Long model with 4 mm guide
Vespa PX Rainbow
Vespa 125 PX T5
Vespa PX
Vespa PE
Vespa PX Arcobaleno
Vespa Cosa
Vespa PK all types
6-12 VOLT, 24 WATT
Black
Clutch fastening nut for Vespa PX 125/150/200 from 1995 - COSA 2
Vespa 125 Cosa 2 VLR2T
Vespa 125 Cosa 2 VNR2T
Vespa 150 Cosa 2 VSR1T
Vespa 125 PX VNX2T from 1995
Vespa 125 PX ZAPM74100 2T AC `11
Vespa 125 PX Cat ZAPM50100 2T AC `07
Vespa 150 PX ZAPM74200 2T AC `11
Vespa 150 PX Millennium VLX1T 2T AC `98
Vespa 200 PX VSX1T from 1995
Vespa 200 Cosa VSR1T
Dimensions: M12x1.5mm
Steel
Spare wheel protection fixing screw for Vespa 125 TS/PX-150 PX-160 GS/180 SS-Rally/200 PE-Rally
Finish: Galvanized
Front Wheel Hub Fa Italia SPORT for Vespa PX 125/150/200E 2°/T5
Vespa 125 PX Rainbow
Vespa 150 PX Rainbow
Vespa 200 PX Rainbow
In Aluminum, complete with bearings.
Adjustable sport fork spring for Vespa 125/150/200 V30-VM-VN-VNA-VNB-GT-GTR-TS-VBA-VBB-VB1-GL-Sprint-Sprint Veloce
Vespa 125 V30T > V33T (adaptable)
All models from '53 to '79
Excluding 125 Primavera ET3, PK, PX, PE
Smoked Light Body for Vespa 125/150/200 PX -CAT-Millenium
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millennium '98>'05
Vespa 150 PX VLX1T Millennium '98
Vespa 200 PE VSX1T Millennium '98
Vespa 125/150/200
For SI 20-24 carburetors
This cover is modified by enlarging the fuel passages, thus reducing the annoying emptying of the bowl (which normally occurs with 177cc and 225cc modifications), reducing the risk of seizing.
FRT clutch pressure plate with specific bearing for FRT clutch cover for Vespa 125 VBA/VBB/VNB/Super/GT/GTR/TS/PX-150 Super/GL/Sprint/S Veloce/PX
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 125 PX T5 VNXST
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
The CGM 265 MICRO is the full-face helmet designed specifically for young motorcyclists. Created to offer the perfect blend of maximum protection and absolute comfort, this model stands out for its extraordinary lightness, crucial to avoid straining the neck of the little ones while riding.
Safety meets style: with modern and captivating graphics, wearing the helmet becomes fun for young bikers, while sizes specific for children and teenagers ensure a stable, precise, and secure fit.
Why choose it: Strengths
Exceptional Lightness: With an average weight of only 1050 gr, it minimizes cervical fatigue.
Visibility and Safety: Interiors equipped with high-visibility reflective bands for safe travel even in low light conditions.
Perfect Climate: Air Stream System ventilation with 3 zones and internal ducts for dynamic and constant air circulation.
Maximum Practicality: Quick-release visor and fully removable and washable interiors for hygienic and quick maintenance.
Technical Specifications and Comfort
The CGM 265 MICRO does not compromise on the features of adult helmets, adapting them to a junior format:
Long Swinging Vis
Black lock cover for Vespa 50 R 2°/S 2°/Special V5B3T 2°/100/125 PV 2°/ET3 2°/Sprint V 2°/Super 2°/200 Rally 2°/P80-150X/PX80-200-E/Lusso 1°/P150S/P200E
Vespa 50 V5A1T 912783>
Vespa 50 Special V5B3T 207317>
Vespa 125 GT>GTR VNL2T 151356>
Vespa 125 Primavera VMA2T 0188997>
Vespa 125 Primavera ET3 VMB1T 44966>
Vespa 150 Super VBC1T 529891>
Vespa 150 Sprint VLB1T 0366947>
Vespa 180 Rally VSD1T 041607>
Vespa PX VNX1T>VNX2T> 200000
Included: 2 grains for fastening
Vespa PX
Vespa PE
Vespa PX Rainbow
Vespa PE Rainbow
All models / Tutti i modelli
Useful for regulating voltage fluctuations in light bulbs
Complete fork with joint for Vespa 125/150/200 PX-PE 1st series
Vespa 80 PX V8X1T> 100000
Vespa PX 125 VNX1T 36569>
Vespa PX 125 VNX2T> 1115
Vespa PX 150 VLX1T 72367> 346430
Vespa P200E VSX1T 16166> 112625
16 mm pin
Front black fender bumper for Vespa 80/125/150/200 PX-PE-Arcobaleno-MY
Vespa PX (all)
Vespa PE (all)
Front and rear smoked light body kit original SIEM for Vespa 80/125/150/200 PX-PE-My-2011-LML
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Original SIEM front and rear red light body kit for Vespa 80/125/150/200 PX-PE-My-2011-LML
Vespa PX 80
Vespa PX 80 E Rainbow
Vespa PX 100
Vespa PX 100 Rainbow
Vespa P 125 X
Vespa PX 125 E
Vespa PX 125 E Rainbow
Vespa PX 125 T5
Vespa P 150 X
Vespa P 150 X E Rainbow
Vespa P 200 E
Vespa P 200 E Rainbow
Vespa PX
Vespa PE
Suitable for stators with electronic ignition
Inner diameter: 94 mm
Weight: 1.60
balanced