Vespa 150
Front brake and clutch protection bellows Vespa 125 VNA-TS/150 VBA-Rally/PX80-150X/PX80-200E/Lusso/'98/MY/'11/T5/LML Star 125-200 2T/4T
Vespa 80/125/150/200 PX T5
Front luggage rack type "ULMA" chrome for Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
Vespa Largeframe Rally, Sprint, SS180, GS160, GT, GTR, GL, Super, VBB, VBA, VNA, VNB, GS150, VL, VB, VM, VN, V1-15, V30-33
All models / Tutti i modelli
Buzzer
Check the size of your plug before purchasing.
SIEM marked headlight glass for Vespa 125 GT/150 GL/Sprint/180 SS
Vespa 125 GT VNL1>2T
Vespa 150 GL
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
Trapezoidal Shape
Primary couple with extended Malossi ratio (Z 23/64) for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 PX, Vespa 125 TS, Vespa 150 PX, Vespa 150 Sprint Veloce
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an evolventimeter.
The HTQ Malossi gears are made using only materials that exceed the very strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and resistance.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Inspired by the classic Italian style that has always distinguished us, the 191 PIX is an extremely compact and lightweight demi-jet. It differs from the traditional spherical helmet thanks to the front metal air intakes and the rear shell cuts that also house the air extractors. The thermoformed interiors, fully removable and washable, are equipped with a chin strap and removable neck collar with a zip, and in all graphic variants, embellished with brown eco-leather details with a vintage style. The PIX can be equipped with a long visor for greater wind protection or a contoured visor with modern lines, the interchangeable visors share the fastening system which in the graphic versions is made of metal. The helmet's features are completed by the micrometric buckle, the anti-theft ring, the strap holder elastic, and in the graphic variants, the rear goggle strap holder.
BGM CLASSIC stator wire restoration kit for Vespa 125/150/200 PX-PE without electric start
Vespa 125 PX VNX2T
Vespa 150 VLX1T
Vespa PX 200E VSX1T
Rainbow Series
Economical and high-quality BGM solution to renew an old ignition base plate.
Pre-assembled cable whips are provided to be resoldered to the existing alternator in place of the old defective cables.
The cables are equipped with expertly crimped connectors with heat shrink tubing insulation and stripped and pre-tinned ends for attachment to the base plate. Of course, the spark plug tube for cable protection is also included.
Prefabricated to fit Vespa ignition plates
Original cable colors
Incl. professionally insulated and mounted plug
Inexpensive
A soldering iron is required for assembly
Faucet base gasket for Vespa 125 V30>33T-125 VM1>2T-150 VL1>3T-150 VB1T-150 GS VS1>5T
Vespa 125 V30>33T-125 VM1>2T-150 VL1>3T- 150 VB1T- 150 GS VS1>5T
Material: Cork
Original owner's manual and maintenance booklet from 1956 for Vespa 150 VL1>3T
Vespa 150 VL1>3T
Fixing screw kit for Vespa 125 V30>33T/VM/VN/VL/VB1T/VBA/VNB/GT/GTR/Sprint/Super
Vespa 125/150
Finish: Galvanized
Kit composed of 6 screws M 4 x L. 30 mm, washers and nuts
Tool bag with tools Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - black
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Included:
- 6 ring spanners in sizes (7, 8, 9, 10, 11, and 13mm).
- A set of 10-piece ½" socket wrenches in sizes (10, 11, 13, 14, 17, 19, 21, 22, and 24mm)
- A set of 41-piece ¼" socket wrenches in sizes from 4mm to 14mm and bits for slotted, Phillips, hex, and TX wrenches
- Needle nose pliers
- Tube wrench
- Spark plug wrench
- 10 cable ties
- 10m insulating tape
- 100g of winding wire
- 11-piece Bowden cable repair kit
- Canvas tool bag with 5 compartments
Tool bag for Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal - brown
Vespa 125/150/180/200 VNB, VBB, Rally, Sprint, PX, PK, Lambretta, GTS, Sprint, Primavera, LX, S, ET4 universal
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 160 GS VSB1T
Vespa 180 SS VSCT
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Chromed
Spring, washer, and nut
Contact bushing for Piaggio indicators for Vespa 80/125/150/200 PX PE
Vespa PX
Vespa PE
Flat faston connector
Black
Aluminum air filter box for Vespa 125 VNB-TS/150 VBA-Super/180 Rally/PX80/125/150E
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Sprint VLB1T
Vespa 125 PX
Vespa 150 PX
Chromed air filter cover for Vespa 125 VNB-TS/150 VBA-Super/Rally/P80-150X/P200E/PX80-200E
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Specific for carburetor
1.6 mm
4 mm
Vespa 125/150 VM-VN-VL-VB
Cable gland for accelerator/electrical system sheath for Vespa 150 GS
Vespa 150 GS VS1T>5T (throttle)
Vespa 150 VL1>3T (Electrical system)
In rubber, color gray
Cable Grommet Fuel Tube Body for Vespa 80/125/150/160/180/200 Sprint, VNB-VBB-VBA-GT-GTR-PX-Cosa
Vespa 125 from 1958, Vespa 150 from 1958, Vespa 160 GS VSB1T, Vespa 180, Vespa 200, PX / PE
T5
In rubber, black color
Vespa 150 GS VS1>5T
Diameter: 17 mm
Fuel hose grommet for Vespa 80/125/150/160/180/200 T5-Sprint, VNB-VBB-VBA-GT-GTR-PX-Rally
Vespa 125 from '58 (all)
Vespa 150 from '58 (all)
In rubber, black color
Seal/cap for air cleaner (carburetor screw) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5
Vespa 125 (excluding Primavera ET3)
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Carburetor-air filter gasket pair, engine cover-air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Paper
2 Pcs.
Gasket/cap for air filter (carburetor screw) for Vespa PX125-200 E Lusso/T5 2°
Vespa PX125-200 E Lusso/T5 2°
Carburetor-Air Filter Gasket ATHENA for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150
Athena offers the widest range of loose replacement gaskets
available on the market. At the core of Athena gaskets are
over forty years of industry experience, solid know-how, and
high technical skills in design and production.
Athena boasts constant technological development conducted by an in-house
team of engineers and designers and a Made in Italy production
carried out strictly following the stringent parameters set by manufacturers.
Purifier gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Athena gasket between crankcase and air filter for Vespa 125/150/180/200 PX-PE-T5 with Mix
Vespa 125/150/180/200
Athena provides the widest range of replacement bulk gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the strict parameters imposed by manufacturers.
Athena gasket between crankcase and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of loose replacement gaskets available on the market. At the core of Athena gaskets are over forty years of industry experience, solid know-how, and high technical skills in the design and production phase. Athena boasts constant technological development conducted by an internal team of engineers and designers and a Made in Italy production carried out strictly following the stringent parameters imposed by the manufacturers.
For models without MIX
Athena gasket between carburetor and air filter for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE
Vespa 125/150/180/200
Athena provides the widest range of bulk replacement gaskets available on the market. Athena gaskets are based on over forty years of industry experience, solid know-how, and high technical skills in the design and production phases. Athena boasts constant technological development carried out by an internal team of engineers and designers and a Made in Italy production executed by strictly adhering to the stringent parameters imposed by the manufacturers.
For models without MIX
Siltech Performance Purifier Gasket for Vespa 125/150 PX PE VBA VBB VNB GT GTR TS GL RALLY
Vespa PX
Vespa PE
Vespa 125
Vespa 150
Vespa 160
Vespa 180
Vespa 200
Gasket for the carburetor box (WITHOUT MIXER) made of
sintered polymer, it is flexible but with excellent mechanical and chemical resistance.
It has the same shape as the box to avoid making joints and ensure optimal sealing.
Piaggio gasket under carburetor bowl for Vespa 125/150/180/200 Rally-PX-/'98/MY/'11/T5/Cosa
Vespa 180/200 Rally-PX-'98/MY/'11/T5/Cosa
In aramid
for models with a mixer
Air box VMC VENTURI for Vespa 125 TS /150 Sprint V./Rally/P80 -200E/PX80-200E/Lusso/'98/MY /'11/T5
Vespa 80/100/125/150/200 PX PE
The venturi hole is Ø 26mm and fits perfectly with carburetors of this size. To adapt it to smaller carburetors, it is necessary to file the first part of the carburetor's intake duct, while for carburetors with a diameter greater than 26mm, it is necessary to slightly file the venturi to fit the carburetor's diameter.
Advantages:
Improves engine performance
Increases power, acceleration, and top speed
Compatible with carburetors with or without a mixer
Possibility to mount an air filter directly in the box
Refined and classic look
Indeformable aluminum body
Vespa 125/150/180/200
Vespa 50/125/150 Primavera-LX-Sprint
Body seal and shock absorber support for Vespa 125 V33T 228596->/VM/VN/ACMA70191->/VL/VB/GS
Vespa 125 V32T 228596>
Vespa 125 V33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VGL1T
Vespa 150 VB1T
Vespa 150 GS VS1>5T
In black rubber