Buzzetti Flywheel Extractor M24x1mm for Vespa PK50-125/S/XL Automatic
Original reference: 5260-52600000
Vespa PK50-125/S/XL Automatic
Related articles
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
CNC machined aluminum fan
With Variable Advance 12 Volt 90 Watt
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
12v 90w variable advance
Connections: blue - to ground + to the small terminal of the control unit
red/black to the large terminal of the control unit + to ground for shutdown
yellow to the voltage regulator
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Fixed advance electronic ignition Sip Performance cone 20 for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2° /Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
flywheel: 1660g (CNC aluminum)
9 coils, 12 magnets, 12V, DC, 110 watts, fixed ignition point.
Electronic ignition with variable advance Sip Performance cone 20 for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2° /Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
flywheel: 1660g (CNC aluminum)
9 coils, 12 magnets, 12V, DC, 110 watts, variable ignition point.
Flytech ignition "touring" cone 20 for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
flywheel: 1.8 kg
The ignition
Flytech Touring features a cast fan similar
to the original that maintains the Vespa's design, it is
equipped with a high-voltage "Sparkey" control unit and, in some
specific models, supplied with CNC machined rotors
made from solid. The main features of this new
ignition are: - greater inertia (increased and redistributed peripheral weight) - high-voltage spark plug spark - "Original Style",
does not alter the Vespa's style - greater reliability thanks to the rotor
made from solid, operation without pick-up, and the enhanced electronic
control unit.
Complete replacement stator with plate for electronic ignition VMC Vespa 50/90/125 Primavera VMA1>2T
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Malossi Vespower variable advance electronic ignition with electric start cone 20, 1.2 kg for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Electronic ignition VMC (cone 19 kg.1,5) with red VMC fan CNC for Vespa 50/90/125 Special-N/L/R-PK-Primavera-Primavera ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Variable advance 12v 90w
Connections: blue - to ground + to the small terminal of the control unit red/black to the large terminal of the control unit + to ground for shutdown yellow to the voltage regulator
New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil
Aluminum cooling fan with enlarged fin profiles to increase airflow and better cool the thermal unit even in the most demanding conditions
Electronic ignition VMC (cone 19 kg.1.5) with VMC fan in blue color
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Variable advance 12v 90w
Connections: blue - to ground + to the small terminal of the control unit red/black to the large terminal of the control unit + to ground for shutdown yellow to the voltage regulator
New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil
Aluminum cooling fan with enlarged fin profiles to increase airflow and better cool the thermal unit even in the most demanding conditions
Electronic ignition VMC (cone 20 kg.1.5) with red CNC fan for Vespa 50/90/125 Special-N/L/R-PK-Primavera-Primavera ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Variable advance 12v 90w
Connections: blue - to ground + to the small terminal of the control unit
red/black to the large terminal of the control unit + to ground for shutdown
yellow to the voltage regulator
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Variable advance 12v 90w
Connections: blue - to ground + to the small faston of the control unit
red/black to the large faston of the control unit + to ground for shutdown
yellow to the voltage regulator
Complete stator with electronic flywheel VMC for Vespa LARGE FRAME PX125-200/ P200E/ RALLY 2°/ COSA/ LML/ LUSSO
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
Parmakit Electronic Ignition - cone 20 Kg 1,100 gray - Vespa Smallframe
- Weight Kg 1.100
- Cone 20
- Riveted flywheel
- Grey fan
Electronic ignition Parmakit - cone 20 Kg 1,100 yellow - Vespa Smallframe
- Weight Kg 1,100
- Cone 20
- ECV Flywheel
- Yellow fan
Parmakit Electronic Ignition - cone 20 Kg 1,100 carbon look - Vespa Smallframe
- Weight Kg 1.100
- Cone 20
- ECV Flywheel
- Carbon Look Fan
Parmakit electronic ignition - integral flywheel cone 20 Kg 1,100 gray variable advance - Vespa Smallframe
- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Grey fan
- Variable advance
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 yellow - Vespa Smallframe
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
Parmakit electronic ignition - integral flywheel cone 20 Kg 1,100 carbon look - Vespa Smallframe
- Weight Kg 1.10
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 carbon look - Vespa Smallframe
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,100 grey - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Grey fan
- Variable timing
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 gray - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Grey fan
- Variable advance
Parmakit electronic ignition - integral flywheel cone 20 Kg 1,100 yellow - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.100
- Cone 20
- Integral flywheel
- Yellow fan
- Variable advance
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,700 yellow - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Yellow fan
- Variable advance
Parmakit electronic ignition - integral flywheel cone 20 Kg 2,500 yellow - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 2,500
- Cone 20
- Integral flywheel
- Yellow fan
- Variable timing
Electronic ignition Parmakit - integral flywheel cone 20 Kg 1,100 carbon look - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1,100
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable advance
Parmakit electronic ignition - integral flywheel cone 20 Kg 1,700 carbon look - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 1.700
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing
Parmakit electronic ignition - integral flywheel cone 20 Kg 2,500 carbon look - Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
- Weight Kg 2,500
- Cone 20
- Integral flywheel
- Carbon look fan
- Variable timing
Parmakit electronic ignition with variable advance for electric start - interchangeable crown
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Electronic ignition with variable advance for electric start
- interchangeable crown
Weight: 0.2 kg.
Color: Grey
Weight: 0.2 kg.
Color: Yellow
Weight: 0.2 kg.
Color: Carbon Look
Cone: 20
Weight: 0.9 kg.
Cone: 20
Weight: 0.9 kg.
Cone: 20
Weight: 1.5 kg.
Cone: 20
Weight: 2.3 kg.
Flywheel for ignition Vespa ET3-Special-Primavera-PK
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Flywheel for Vespa PX-PE ignition
Electronic ignition with internal rotor Malossi MHR II cone Ø 20 for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Manages multiple maps simultaneously without having to resort to handheld devices, with a simple click. Allows you to translate the selected map by moving the OFFSET (+ or - 2°).
Malossi ignitions concentrate the maximum technology applied to competitions. The new internal rotor ignitions are born from the need to overcome the technical limitations of the original flywheel-ignition groups, which beyond 10,000 rpm do not guarantee consistent performance, causing significant and sometimes insurmountable tuning problems.
We have made the control unit even more immune to interference by developing a microprocessor based on uP STM8 - 8 Bit with superior computing capacity @ 20 MIPS to ensure much greater spark precision compared to the previous version!
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows you to shift the selected map + or - 2°
the third (LIM) particularly indicated for 4-stroke engines, allows you to vary the intervention
Electronic ignition VMC - CNC flywheel cone 20 for Vespa PX125-150-200 - PE200
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
black wire to ground on the small pin of the idm control unit/coil and bridged with the black wire coming from the Vespa's electrical system
blue wire on the large pin of the idm control unit/coil and bridged with the green wire for shutdown coming from the Vespa's electrical system
white wire for AC output to be connected to the blue wire of the electrical system; the original voltage regulator can be used
SIP PERFORMANCE Ignition by VAPE Sport for Vespa 125/150/200/PXPE/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
CNC aluminum
flywheel: 1660g
12 magnets
12V, AC 110 watt
9 coils
pre-setting of variable ignition
Coil support bracket and VMC voltage regulator for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Vespa 50/90/125 Special/N-L-R-Primavera-PK
Support Plate for control unit and voltage regulator to be mounted on Vespa small frame engine casing
With this support made of stainless steel, it is possible to
mount the coil and the voltage regulator directly on the
Vespa small frame engine casing
SIP control unit bracket on starter motor plate for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80 -200/PE/Lusso/Cosa
for models with electric start housing
Flywheel for electronic ignition VMC integral version CNC (cone 20 kg.1.2)
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Flywheel nut electronic ignition cone 19 for Vespa 50 L/Special/90/125 Primavera VMA2T-ET3
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition VMC PRECISION with CNC flywheel for Vespa largeframe and PX-PE cone 20 + flywheel mass
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
This ignition system features a flywheel machined from solid with CNC processing, offering superior stability compared to the CLASSIC version. This makes it the ideal choice for high-performance engines.
Main Features and Benefits:
Optimized Weight: The complete assembly, which includes the CNC flywheel and the specific cooling fan for Vespa Largeframe, weighs approximately 1700g. For further customization, you can easily add optional weights to the CNC flywheel (210g, 410g, 610g, or 820g) to fine-tune your engine's characteristics.
Variable Timing: Enjoy better acceleration, throttle response, and maximum power thanks to the 8-degree variable timing. This smart system keeps the cylinder cooler at high revs, ensuring optimal performance even in the most challenging conditions.
Improved Cooling: The die-cast aluminum cooling fan features an enlarged fin profile, significantly increasing airflow for more efficient cooling of the thermal unit, even in the toughest situations.
Increased Output Power: The VMC PRECISION ignition delivers about 90 watts of power, supporting the use of 12-volt lamps. (Note: if your model uses 6-volt lamps, they will need to be replaced.)
Ignition SIP PERFORMANCE by VAPE Road "Black Edition" 12 V DC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Version: Road "Black Edition
CNC aluminum
flywheel: 1660g
12 magnets
110 watts
9 coils
matte black
static ignition point
Electronic ignition VMC in CNC (cone 19 kg.1.5) with VMC 10 fan
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Flywheel machined from solid weighing approximately 1200g with the fan the total weight is 1500g
On the CNC flywheel, it is possible to screw on an additional weight of choice between 210g, 410g, 610g, 820g.
The VMC ignition is variable advance by 8° degrees complete with stabilizer and IDM coil
Cooling fan in aluminum with enlarged blade profile to increase air flow and better cool the thermal group even in the most demanding conditions
Fans available in different finishes and materials with more or fewer blades depending on the type of engine
The ignition delivers about 90 watts of power and requires the use of 12-volt lamps (this modification involves replacing the lamps in models that use 6v).
Ensures greater pickup, extension, and acceleration thanks to the ignition advance that varies by 8° degrees leaving a cooler cylinder at high revs
The ideal ignition for most engines both modified and original
The stator has an auxiliary cable for the possible recharging of a battery that can be managed through the supplied voltage regulator
Instructions are
Flywheel for electronic ignition VMC cone 20 kg.1.4 complete with stator for Vespa 50 N/L/R-Special/125/Primavera/ET3/PK/S
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Variable advance 12v 90w
Connections: blue - to ground + to the small spade connector of the control unit red/black to the large spade connector of the control unit + to ground for shutdown yellow to the voltage regulator
New VMC EVO ignition kit with variable advance for Vespa Smallframe engines, complete with stabilizer and IDM coil
Aluminum cooling fan with increased fin profiles to enhance airflow and better cool the thermal unit even in the most challenging conditions
Electronic ignition EVOK (cone 20 kg.1.4) for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
EVOK electronic ignition with variable advance Ø20mm cone. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the flywheel's weights are machined from solid and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows for perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - 1400g flywheel - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit 7 sales plus - Plug and play, everything necessary for assembly included - Excellent quality and long-term reliability - Returns and extended warranty for 24 months - 24-hour Whatsapp hotline for assistance and consultation for specific adjustments upon request - Fan color gray like the original to avoid issues during inspection or historical register registration - Inclination notches for advance adjustment - Rotor of approximately 1.4kg, for +30% extension.
Electronic ignition EVOK (cone 19 kg.1.4) for Vespa 50/90/125 Primavera ET3/PK50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
EVOK electronic ignition with variable advance cone Ø19mm. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the flywheel weights are made from solid material, perfectly balanced and galvanized. Finally, the stator plate features a graduated scale that allows for perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for installation.
- 1400g flywheel - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit
7 sales plus - Plug and play, everything necessary for installation is included - Excellent quality and reliability over time - Return and extended warranty up to 24 months - 24-hour Whatsapp toll-free number for assistance and consultation for specific adjustments upon request - Fan color gray like the original to avoid problems during inspection or historical register registration - Inclination notches for advance registration - Rotor approximately 1.4kg, for +30% extension.
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
VMC classic 2.5 kg electronic ignition for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
The weight of the Flywheel + Fan is approximately 2500g
A specific cooling fan for use on Vespa Large Frame made of aluminum with 16 blades and an enlarged profile to increase airflow and optimally cool the thermal unit even under the most demanding conditions.
The ignition delivers approximately 90 watts of power and requires the use of 12-volt lamps (this modification involves replacing the lamps in models equipped with 6v).
It ensures better pickup, extension, and acceleration thanks to the ignition advance that varies by 8° degrees, leaving a cooler cylinder at high revs.
The ideal ignition for most engines, both modified and original.
The stator features an auxiliary cable for the optional charging of a battery, which can be managed through the supplied voltage regulator
Instructions are also available in digital format in the attachments section.
YGros Race ignition by VAPE variable advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Variable Timing
Flywheel mass for electronic ignition VAPE (500GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2150g is achieved.
Material: Galvanized Fe360
Screws for fastening included
YGros Race ignition by VAPE fixed advance 12 V 110W AC for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
-Flywheel: 1650 Gr CNC
-12 magnets
-110 watts
-9 coils
-Fixed advance
Flywheel mass for VAPE electronic ignition (800GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 2450gr is achieved.
Material: Galvanized Fe360
Screws for fastening included
Flywheel mass for electronic ignition VAPE (200GR) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
By adding this kit to the YGROS RACE Vape fan, a total weight of approximately 1850g is achieved.
Material: Galvanized Fe360
Screws for fastening included
Coil support bracket and voltage regulator BOLLA ELABORAZIONI for Vespa 50/90/125 Special/N-L-R-Primavera-PK
Vespa 50/90/125 Special/N-L-R-Primavera-PK
Plate Support for control unit and voltage regulator to be fixed on Vespa small frame engine casing
With this support made of stainless steel, it is possible to
mount the coil and the voltage regulator directly on the Vespa small frame
engine casing
Flywheel mass for VAPE electronic ignition (680g) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
Flywheel mass for electronic ignition VAPE (250g) for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
FAN FABBRI RACING for VAPE electronic ignition for Vespa 125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125/150/200 PX
Vespa 125/150/200 Cosa
LML
Screws for fastening included
Electronic ignition EVOK flywheel machined from solid (19 mm cone 1.4 kg) for Vespa 50/90/125 Primavera ET3/PK50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance Ø19mm cone. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the flywheel weights are made from solid material and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows for perfect ignition timing adjustment. Each kit comes with everything needed for installation.
- 1400g flywheel - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit
7 sales plus - Plug and play, everything needed for installation is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour Whatsapp toll-free number for assistance and consultation for specific adjustments on request - Gray fan color as original to avoid issues during inspection or historical register registration - Inclination notches for advance adjustment - Rotor approximately 1.4kg, for +30% extension.
Electronic ignition EVOK flywheel made from solid (cone 20 kg.1.4) for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance Ø20mm cone. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the weights of the same are made from solid material and are perfectly balanced and galvanized. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - 1400g flywheel - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit 7 plus sales - Plug and play, everything necessary for assembly is included - Excellent quality and long-term reliability - Return and extended warranty to 24 months - 24-hour WhatsApp toll-free number for assistance and consultation for specific adjustments on request - Fan color gray as original to avoid problems during revision or historical register registration - Inclination notches for advance registration - Rotor approximately 1.4kg, for +30% extension.