Polini Evolution 2 aluminum thermal group head D 58 central spark plug (long thread) for Vespa 50 Special/NLR/Primavera/ET3-Ape 50
Original reference: 211.0322
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Related articles
Polini exhaust with aluminum silencer for Vespa 125 Nuova VMA1T, Vespa 125 Primavera VMA2T, Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
Painted, with aluminum silencer
Big Bore Collector for VMC Evo-Racer Exhaust Vespa 50/90/125 Primavera ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note-> Hole spacing of 62mm
Vespa 125 Primavera, Vespa 125 Primavera ET3
Big bore manifold 62 attachment handcrafted VMC Kifly expansion exhaust for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Simonini Expansion Exhaust Down under Carbon for Vespa 125 Primavera ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Big bore manifold attachment 52 expansion exhaust VMC Kifly handcrafted for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Simonini Down Under Carbon Expansion Exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note: Yellow Carbon-Like Silencer
VMC Evo-Racer 52 expansion exhaust handcrafted for Vespa 50/125 N-L-R-Special-Primavera
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Complete with brackets and bolts
Tested with great satisfaction on the track by the VMC team with champion Mauro Bigarella.
Recommended timing 130/188 190
Flange with a 52mm center distance and 32mm hole
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Complete with brackets and bolts
Specific for Zuera RR-VTR Thermal Groups
VMC STRIKE handmade expansion exhaust for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Note--> Complete with brackets and bolts
Tested with great satisfaction on the track by the VMC team, excellent for Pro Cup, Pro Cup 2, M1, and similar non-modified thermal groups
the exhaust manifold has a flange with slotted holes and fits stud spacing of 52, 56, and 62mm
the inlet diameter of the manifold is 28mm
Marmitta espansione VMC Evo-Racer artigianale attacco 62 per Vespa 125 Primavera- ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Note--> Completa di staffe e bulloneria
Testata con grande soddisfazione su pista dal team VMC con il campione Mauro Bigarella.
Consigliate le fasi 130/188 190
Flangia con attacco con interasse 62mm e foro da 35mm
Handcrafted MHR expansion exhaust for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Note--> Complete with brackets and bolts
No need to cut the body on ET3
Complete Polini Evolution dual-ring piston 130cc diameter 57 selection C for Vespa 50 Special/NLR/Primavera/ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Diameter 57.0 selection C
EGIG Performance Superbanana Sport Racing Exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
This "Super-banana" exhaust is capable of offering performance normally associated with hand-welded multi-segment expansion chamber exhausts. It provides only 5-10% less power than the most powerful of the much more
expensive types. The breadth of the power band it produces also holds up well. In reality, this is a true high-performance exhaust disguised as a retro banana!
Discreet appearance.
Strong performance.
Manageable power delivery.
There is a silencer integrated into the exhaust body, reducing the noise created to an acceptable level, without negatively affecting operation or power output.
For cylinders with modern layout
Single-piece or multiple outputs
126-128 exhaust timings
185-192 output
32mm manifold
Compatible with storage compartment
Tires up to 3.50
Pin distance 54-62 mm
EGIG Performance VRA racing exhaust for M200 for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK (with frame modification)
EGIG Performance MAMBA racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
exhaust manifold 54-60mm
for 100-144cc
EGIG Performance COBRA EVO racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
muffler: aluminum
exhaust manifold 54-62mm
for 130-160cc
EGIG Performance VIPER racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-58mm
for 130-160cc
phases: 128-130 / 188-190
VMC FIFTY 'S handcrafted expansion exhaust for Vespa 125 Primavera- ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Compared to the Vmc Strike sister, it is less refined and may have marks on the surface that do not affect the performance of the exhaust. The overall dimensions of the exhaust are almost the same as the Strike.
It fits on Et3 frames with the side compartment, on Pk frames it is necessary to slightly cut the bulkhead to allow the expansion curve to pass
Designed to give the best on phases 122/175, it adapts to most classic cylinders on the market and to a wider range of phases.
It adapts very well to both short-stroke 100cc and long-stroke 130cc cylinders.
The NEW manifold has a 28mm exhaust diameter
Inside the duct, there may be a portion of tube that needs to be filed to create an unobstructed passage for the exhaust gas flow.
Excellent for Pro Cup 3, VMC T-56 100cc, VMC 100 RVA Lamellare, Polini and Malossi cast iron, M1 and similar thermal units
It has a
Polini short stroke exhaust manifold for Vespa 50 Special V5A2>3T/V5B1>4T
Vespa 50 Special V5A2>3T/V5B1>4T
for Polini "banana" exhausts
Simonini Down Under Carbon Expansion Exhaust for Vespa PK 50-125 S-XL-HP
Vespa 50 PK S/XL
Vespa 125 PK S/XL
N.B: this type of expansion exhaust does not allow for the spare tire to be kept.
VMC Kifly handmade expansion exhaust 52 for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Note--> Complete with brackets and bolts
Exhaust diameter 37mm
Stud spacing 52mm (does not fit on Vespas with glovebox and for PK model Vespas the spare wheel must be removed)
EGIG Performance Superbanana Touring Racing Exhaust for Vespa 125 Primavera-ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
This "Super-banana" exhaust is capable of offering performance normally associated with hand-welded multi-segment expansion chamber exhausts. It provides only 5-10% less power than the most powerful of the much more expensive types. The width of the power band it produces also holds up well. In reality, this is a true high-performance exhaust disguised as a retro banana!
Discreet appearance.
Strong performance.
Manageable power delivery.
There is an integrated silencer in the exhaust body, reducing the noise created to an acceptable level, without negatively affecting operation or power delivery.
One-piece output
120-125 exhaust timing
170-180 output
27-29° pre-output
32mm manifold
Glove compartment compatible
Fits PK without frame modifications
Tires up to 3.50
Pin distance 54-62 mm
EGIG Performance PYTHON S racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-62mm
manifold 32mm
phases 120-125 / 170-178
The S stands for SPORT and SILENCE (with the same performance as the PYTHON model without S)
EGIG Performance PYTHON racing exhaust for Vespa 125 Primavera-ET3
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
steel
unpainted
silencer: aluminum
lefthand
vent pin 54-62mm
manifold 32mm
for 100-140cc
Phases: 120/124 – 178/182
Modified manifold for Simonini Down under Carbon expansion mounting on Vespa 50 N-L-R
Polini long stroke exhaust manifold for Vespa 125 Nuova VMA1T, Vespa 125 Primavera VMA2T, Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3
for Polini "banana" exhausts
VMC Kifly handcrafted expansion exhaust 62 for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Note--> Complete with brackets and bolts
Exhaust diameter 37mm
Stud spacing 52mm (does not fit on Vespas with a glovebox and for PK model Vespas, the spare wheel must be removed)
Polini exhaust without silencer for Vespa 125 Nuova VMA1T, Vespa 125 Primavera VMA2T, Vespa 125 Primavera ET3 VMB1T
Vespa 125 Primavera, Vespa 125 Primavera ET3