Vespa Engine Spare Parts
Maximize the performance of your scooter with the exclusive selection of engine parts available at RDV Scootershop. Within our catalog, you will find everything you need for restoration or tuning: from thermal groups to crankshafts, to gasket kits, connecting rods, and high-precision bearings. Each component is chosen to ensure reliability and maximum compatibility with both classic and modern Vespa models. Whether you are looking for a reinforced clutch or gearbox components, RDV Scootershop offers you only the best brands in the industry with fast shipping and dedicated technical advice. Rely on our expertise to rejuvenate the heart of your Vespa with durable and high-performing spare parts.
Vespa 125 ETS VMS1T
Vespa 125 FL2 VMX7T
Engine type: 80-125ccm, Smallframe
Crankshaft type: Rotary valve
Stroke: 51 mm
Connecting rod: 97 mm
Connecting rod bearing: 15x19x20 mm
Piston pin Ø 15mm
Taper 24/25mm, M12
Ø Seal seat on alternator side: 24 mm
Ø Bearing seat on alternator side: 25 mm
Thread on alternator side: M12
Vespa 125 ETS VMS1T
Vespa 125 FL2 VMX7T
Engine type: 80-125ccm, Smallframe
Crankshaft type: Rotary valve
Stroke: 51 mm
Connecting rod: 97 mm
Connecting rod bearing: 15x19x20 mm
Piston pin Ø 15mm
Taper 24/25mm, M12
Ø Seal seat on alternator side: 24 mm
Ø Bearing seat on alternator side: 25 mm
Thread on alternator side: M12
Vespa 50 V5A1T N,L,R dal 1966
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Pinasco Racing crankshaft cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Cone 20 mm / Cone 20 mm
Stroke 51 connecting rod 97
Valve type
DRT z22 gear on primary straight teeth z56 for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Predieri & Abbate crankshaft original version (19 mm cone) stroke 51 rod 97 for Vespa 125 Primavera-ET3
Vespa 125 Nuova VMA1T
Vespa 125 Primavera VMA2T
Vespa 125 Primavera ET3 VMB1T
Biella: 97 mm
Stroke: 51 mm
Stainless steel exhaust muffler Abarth type with 2 pipes for Vespa 150 GS VS2T>VS5T
Vespa 150 GS VS2T>VS5T
Note--> Tightening via threaded ring
Ape 50
Long stroke advanced crankshaft PINASCO COMPETITION for Vespa 200 Rally VSE1T 33997 ->/P200E/PX200 E/Lusso/MY/Cosa
Vespa 200 PE
Vespa 200 rally VSE1T
Vespa 200 Cosa VSR1T
Roller cage included
Stroke 62 mm
Displacement: from 225cc to 235 cc
Polini HT FOR RACE clutch gear Z 24 for primary Z64 straight teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Dexter Modern Box Muffler (28 mm exhaust) for Vespa PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Vespa 50 PKS/XL/HP/FL2- PK80-125 S/PK100-125XL/PK125/ETS/N/XL2
Modified Padellino PK / HP – Dexter Racing x WhiteOne Racing
The Modern Box 28 is born from the collaboration between Dexter Racing and WhiteOne Racing, with the aim of offering a high-performance semi-expansion with an almost original look, ideal for Vespa PK and HP.
Designed to ensure a perfect balance between performance, low noise, and discreet aesthetics, it represents the ideal solution for those who want to improve power delivery without sacrificing a sober design.
✅ Technical Features
-Available with a manifold internal diameter of 28 mm or 32 mm
-Less noisy than a Proma
-Original-like aesthetics (modern padellino style)
-Excellent torque to make the most of the 4th gear
-Plug & play installation on Vespa PK and HP stroke 43 and 51
-Compatible with tires 3.00 R10 and 90/90 R10
-Slightly shorter manifold compared to the Classic Box to avoid interference with the bulkhead (further shorten-able if necessary
Pinasco touring classic 2.0 exhaust for Vespa 125 VM1>2T-VN1>2T/150 VB1T-VL1>3T
Vespa 125 VM1>2T/VN1>2T-VB1T-VL1>3T
Painted in black
The PINASCO TOURING exhaust has been
designed to enhance engine performance both at low and high
revs while maintaining the same level of quietness. The innovative design
that "breaks all current patterns" has been studied to achieve the
proper gas expansion which significantly increases
engine performance (about 4HP) even in extension.
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
attention: very noisy
Stainless Steel Muffler TYPE ABARTH WITH 2 PIPES for Vespa 125/150 GT-GTR-TS-Sprint
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 GL VLA1T
Stainless Steel Muffler Type ABARTH with 2 PIPES for Vespa 125 VNA/VNB/Super/150 VBA/VBB/Super
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 150 VBA1T
Vespa 150 VBB1T > VBB2T
stainless steel
polished
silencer color: chrome
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Cylinder Connection Complete
Electronic ignition Evok variable advance cone 17 for Vespa 125 VM1>2T-VN1T-VN2T-150 VL1-VB1T
Vespa 125 VN2T-150 VL1>3T-VB1T
Flywheel weight: 1,750 Kg
EVOK electronic ignition flywheel machined from solid (cone 19 kg. 1.4) for Vespa 50/90/125 Primavera ET3/PK50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance cone Ø19mm. Thanks
to the enlarged cooling fan, the airflow for
cooling is 25% higher than the original fan. The
rivets applied during the flywheel assembly phase are reinforced and
ensure exceptional reliability, the flywheel weights are
machined from solid and are perfectly balanced and zinc-plated. Finally, the stator plate features a graduated scale that allows for perfect ignition timing adjustment. Each kit comes with everything needed for installation.
- 1400g flywheel- Enlarged cooling fan- 4-pole stator- Graduated stator plate- Ignition coil- Voltage regulator- 28x1 mm flywheel puller- Coil fixing plate- Spark plug cap- Hardware kit
7 sales pluses- Plug and play, everything needed for installation is included - Excellent quality and long-term reliability- Returns and extended warranty up to 24 months - 24-hour Whatsapp hotline for assistance and specific adjustment consultations on request- Fan color gray as original to avoid issues during inspection or historic register registration- Inclination marks for advance timing registration- Rotor weighing approximately 1.4kg
Electronic ignition EVOK cone 17 for Vespa 125/150 VBA-VBB-VNB-Sprint-GT-GTR-
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
Each kit is equipped with everything needed for assembly - 1400g flywheel - Upgraded cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil mounting plate - Spark plug cap - Small parts kit
Buffer start-up Aries for Vespa 50 R 2°/S 2°/Special V5B3T 2°/SR 2°/90 2°/100/125 PV 2°/ET3 2°/PK50/S/SS/XL/2/FL/HP/Rush/PK80-125 S/PK125/ETS/N/XL/XL2
Vespa 50 V5A1T 893030>
Vespa 50 Special V5B3T 88658>
Vespa 90 V9A1T 141513>
Vespa 125 Primavera VMA2T 0148637>
Vespa 125 Primavera ET3 VMB1T 8091>
Vespa PK
Size: 20x24x9 mm
Reinforced wheel axle nut MOTORISTICA MERIDIONALE for Vespa 50/125 N-L-R-Special-Primavera-ET3
Vespa 50/125 N-L-R-Special-Primavera-ET3
INNOVATION FOR SMALLFRAME GEARSHIFT SHAFTS WITH M14X1.5 NUT
Thanks to the completely redesigned design, it is safe and reliable.
The integrated washer, the enlarged 24mm hexagon, the excellent material machined with CNC turning,
followed by a surface treatment, makes the nut extremely resistant compared to the original.
The nut must be mounted with the original PIAGGIO washer and cotter pin (not included in the kit)
VZR Vezzola Racing Coil Support Bracket and Regulator Kit for IDM Ignitions on SIP and Piaggio Crankcases for Vespa 50/125 PK HP
Vespa 50/125 PK-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient way.
Assembly instructions included.
Material: Stainless steel
VZR Vezzola Racing Coil Support Bracket Kit for Sip Vape Ignitions on SIP and Piaggio Engine Cases for Vespa 50/125 PK HP
Vespa 50/125 PK-HP
The kit includes: Bracket, nuts, washers, bushings with anti-vibration supports, wiring with faston and connectors.
System designed to accommodate all components in an orderly, protected, and convenient manner.
Assembly instructions included.
Material: Stainless steel
Metal cooling shroud for thermal unit for Vespa 50 N ->92876/S->15234
Vespa 50 V5A1T N 1963>1965
In Metal, color black
Fabbri Racing Clutch Discs FB 36 / FB 45 for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
4 carbon sintered discs, 3 interdiscs
Complete aluminum thermal group VMC Type R (114 cc) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 50 PK Ape 50
VMC has designed this kit to bring a breath of fresh air compared to the competition
The TYPE-R 58 is a cylinder with modern duct fluid dynamics designed to develop substantial torque already from low and medium revs
The perfect cylinder to revitalize Piaggio Ape and Vespa 50 engines
Aluminum thermal group kit with high-quality Nikasil coating for a total displacement of 114cc
The kit fits on "short" stroke 43 mm crankshafts, bore diameter 58mm, 6 transfer ports, Timing approximately 124°-172°
Exhaust outlet diameter 28mm, Exhaust stud spacing 52mm
Cast aluminum head with long thread side spark plug
The kit includes 4 m6 Allen screws for better head fastening and 4 m7 studs specific for the cylinder
which eliminate the inconvenient fastening system typical of other short stroke cylinders for smallframe Vespa on the market.
Piaggio Gear 4th Gear 35 teeth for Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Vespa PX150-200 E Lusso 2°/'98/MY/'11/Cosa 150-200
Fabbri racing polygonal clutch bell for Vespa 50/90/125 Primavera ET3-PK/S/XL
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Tempered Steel
For Fabbri Racing Clutches
Electronic ignition EVOK (cone 20 kg.1.4) for Vespa 50/90/125 Primavera ET3-PK S/XL/N/HP
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
Electronic ignition EVOK with variable advance cone Ø20mm. Thanks to the enlarged cooling fan, the air flow for cooling is 25% higher than the original fan. The rivets applied during the flywheel assembly phase are reinforced and ensure exceptional reliability, the weights of the same are machined from solid, perfectly balanced and galvanized. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit is equipped with everything necessary for assembly - Flywheel 1400g - Enlarged cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - Flywheel puller 28x1 mm - Coil fixing plate - Spark plug cap - Small parts kit 7 sales plus - Plug and play, everything necessary for assembly is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour Whatsapp hotline for assistance and consultation for specific adjustments on request - Fan color gray as original to avoid problems during revision or historical register registration - Inclination notches for advance adjustment - Rotor approximately 1.4kg, for +30% extension.
Electronic ignition EVOK (cone 19 kg.1.4) for Vespa 50/90/125 Primavera ET3/PK50
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 125 Primavera VMA1T>2T, Vespa 125 Primavera ET3 VMB1T
EVOK electronic ignition with variable advance Ø19mm cone. Thanks to the larger cooling fan, the airflow for cooling is 25% higher than the original fan. The rivets applied during the assembly phase of the flywheel are reinforced and ensure exceptional reliability, the flywheel weights are made from solid material and are perfectly balanced and zinc-coated. Finally, the stator plate features a graduated scale that allows perfect adjustment of the ignition degrees. Each kit comes with everything needed for installation.
- 1400g flywheel - Larger cooling fan - 4-pole stator - Graduated stator plate - Ignition coil - Voltage regulator - 28x1 mm flywheel puller - Coil fixing plate - Spark plug cap - Small parts kit
7 sales plus points - Plug and play, everything needed for installation is included - Excellent quality and long-term reliability - Return and extended warranty up to 24 months - 24-hour WhatsApp helpline for assistance and consultation for specific adjustments upon request - Fan color gray like the original to avoid issues during inspection or historical register registration - Inclination marks for advance registration - Rotor approximately 1.4kg, for +30% extension.
Corteco wheel hub oil seal 30x40x7 mm for Vespa 125/150 Super-160 GS-180 SS
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Electronic ignition fixed advance Sip Performance cone 17 for Vespa 125/150 VBA-VBB-VNB-Sprint-GT-GTR
Vespa 125 VNA1>2T
Vespa 125 VNB1>2T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Sprint VLB1T
Vespa 150 GL VLA1T
flywheel: 1600g (CNC aluminum)
9 coils, 12 magnets, 12V, AC, 110 watts, fixed ignition point.
Vespa 125 T5 VNX5T
aluminum mold
Ø 56 mm
long thread
1.2 mm angle
11.5:1
Primary transmission pair Polini Evolution straight teeth Z 24x72 (3.00) for Vespa 50 N/L/R-Special-90/125/Primavera/ET3/PK50/125/S/XL/N/HP-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Transmission ratio: Z24/72 = 3.00
Street / Road configuration, designed for road engines.
Bell and shock absorber: Reinforced bell, shock absorber with high-strength springs.
Primary pinion: traditional fastening system.
Vespa Primavera/Sprint 50ccm 2T/4T
l=21.0mm
key 13mm
5 parts
Black kickstart pedal for Vespa 50 Special-N-L-R/90/125 Primavera ET3
Vespa 50 V5A1T N,L,R
Vespa 50 V5SS1T
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 90 V9SS1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
matte black anodized
incl. screw
Parmakit Crankshaft - 83mm Shoulder cone19 - for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK-Ape 50
Vespa ET3 Primavera 125, PK, XL 50/125
shoulders: 83
cone: 19
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
In Tempered Steel
Primary transmission pair Z27x69 (2.56) with straight teeth and shock absorber for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2- Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Z 27 X 69 with straight teeth and shock absorbers
The engine and parts category is really vast on our site.
You will find THOUSANDS of spare parts to fix your engine.. if you don't have tools to work, you can find them in our workshop equipment section
If you are looking for a complete kit, you can find it in this product..
No, we were joking! But this is great for repairs on the road.
This is the moment: gaskets, oil seals, bearings, points, capacitors, and the more you have... the more you add!