RDV Productions
Mounting plates
Black hub cover for Vespa 125/150/180/200 VNB-Super-TS-GT-GTR-Sprint-Sprint Veloce-Rally
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
"TOTAL BLACK" matte version badge kit for Vespa 50 Special, V5B1T 38640 -> V5B3T
Vespa 50 V5B1T 38640 >
Vespa 50 V5B3T
Vespa 50 V5SA1T 69245> (Switzerland)
Original Piaggio Aluminum Shield Edge in Black for Vespa 50 V5A1T L/R-Special V5A2>3T/V5B1>4T-90 V9A1T/125 Primavera ET3
Vespa 50 V5A1T L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Cork fuel tap base gasket for all models except VM1>2T, V30>33T, VB1T, GS VS1T>5T
All models except VM1>2T, V30>33T, VB1T, GS VS1T>5T
Material: Cork
Hub nut for bearing fastening Vespa 125 VNA/VNB/GT/GTR-150 VBA/VBB/GL/Sprint/S.Veloce
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 GT VNL2T> 76107
Vespa 125 GTR VNL2T> 118278
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T >1151814
Vespa 150 Sprint V. VLB1T> 0165002
Vespa 180 Rally VSD1T
Oil can support - luggage rack for internal shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - left side
All models
Measurements---> L 13.5 cm H18.5 cm
Oil can support - luggage rack for inner shield -RDV- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Measurements---> L 13.5 cm H18.5 cm
RDV swivel engine stand adapter from vise for Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
Vespa 125/150/160/180/200 VNB-VBB-GT-GTR-TS-Sprint-GL-Rally
Oil can support - luggage rack for internal shield right and left side -RDV- Vespa Smallframe, Largeframe 10 inch - to be mounted on the thread for the front spare wheel support - left side
All models
Fits all models with the two M8 threads at the front in the frame tunnel, such as Sprint, V50, Primavera, VNB, VBB etc.
Black powder-coated steel, attractive honeycomb design.
Includes rubber with which you can, for example, attach an oil bottle or a can. Also fits behind the usual spare wheel holders.
With slots for a leather strap (not included).
Included in delivery:
Two powder-coated steel mounts, design for the left and right side
Screws and rubber pad to protect the paint
Locking rubber with plastic ball
Ape 50 1970>2022
Pair of black brake and clutch levers for Vespa 50 R 905289 ->/Special 146587 ->/90/125 PV 172802 ->/ET3 24055 ->
Vespa 50 V5A1T from frame 905289
Vespa 50 Special V5B3T from frame 95878 to 96377
Vespa 50 Special V5B3T from frame 146857
Vespa 90 V9A1T from frame 160961
Vespa 125 Primavera VMA2T from frame 172802
Vespa 125 Primavera ET3 VMB1T from frame 24055
Lucid with large ball
Black light switch cover for Vespa 50/90/125 Primavera/GT/GTR/VNB/Sprint/Rally
Vespa 50 V5A1T N,L,R
Vespa 90 V9A1T
Vespa 90 V9SS1>2T
Vespa 125 VNB2>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 Primavera VMA1T>2T
Vespa 150 VBB2T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 Super VBC1T
Vespa 180 SS VSCT ( without battery )
Vespa 180 Rally VSD1T
Compatible with all Vespa models EXCEPT for Vespa 160 GS
Historical recognition plate support with emblem space, mounting under the horn
All models
In stainless steel, laser cut
"Vespa" badge "TOTAL BLACK" glossy version for Vespa P125X VNX2T 65161 ->/P150X VLX1T 436001->/P200E VSX1T 148029->/PX125/150/200E/T5
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
Distance between pegs: 60 mm-length 119 mm
Plaque "Vespa" "TOTAL BLACK" matte version for Vespa P125X VNX2T 65161 ->/P150X VLX1T 436001->/P200E VSX1T 148029->/PX125/150/200E/T5
Vespa 125 PX Arcobaleno VNX2T 200001>
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 150 PX Arcobaleno VLX1T 600001>
Vespa 200 PE Arcobaleno VSX1T 300001>
Pin spacing: 60 mm-length 119 mm
BGM CLASSIC stator wire restoration kit for Vespa 125/150/200 PX-PE without electric start
Vespa 125 PX VNX2T
Vespa 150 VLX1T
Vespa PX 200E VSX1T
Rainbow Series
Economical and high-quality BGM solution to renew an old ignition base plate.
Pre-assembled cable whips are provided to be resoldered to the existing alternator in place of the old defective cables.
The cables are equipped with expertly crimped connectors with heat shrink tubing insulation and stripped and pre-tinned ends for attachment to the base plate. Of course, the spark plug tube for cable protection is also included.
Prefabricated to fit Vespa ignition plates
Original cable colors
Incl. professionally insulated and mounted plug
Inexpensive
A soldering iron is required for assembly
Faucet base gasket for Vespa 125 V30>33T-125 VM1>2T-150 VL1>3T-150 VB1T-150 GS VS1>5T
Vespa 125 V30>33T-125 VM1>2T-150 VL1>3T- 150 VB1T- 150 GS VS1>5T
Material: Cork
Blue interior carpet for glove compartment for Vespa 125 Primavera ET3
Vespa 125 Primavera ET3 VMB1T
Cut to size, color Blue.
Vespa 160 GS 1962>64 VSB1T up to chassis 0055506
In rubber, color black
Vespa 125/150/200 PX-PE
Composed of 3 screws and 3 washers
Headlight ring fastening kit for Vespa 125 GTR/TS-150 Sprint Veloce-180/200 Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Zinc Plated
With Washers
3-Piece Kit
Complete floor strip kit 108 project in black color for Vespa PK50/125/S/SS/ETS/Automatica
Vespa 50 PK
Vespa 125 PK
Vespa 50 V5A1T N/L/R/
Vespa 50 Special /Elestart
Vespa 50 SS
Vespa 50 PK S /XL/FL
Vespa 125 Primavera ET3
Vespa 125/S/Lusso
Front suspension pin fixing nut for Vespa 125/150 VM-VN-VNA-VNB-GT-GTR-Sprint-Sprint Veloce-Super-VB1-VBA-VBB-GL-Rally
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNA1>2T
Vespa 125 VNB1>5T (up to frame 026920 )
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T> 68099
Vespa 125 GTR> 106056
Vespa 150 VL1>3T
Vespa 150 GS VS1T>VS5T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 Super VBC1T > 88999
Vespa 150 Sprint VLB1T > 100091
Vespa 150 Sprint Veloce VLB1T > 151615
Vespa 150 GL VGL1T
Vespa 150 GL VGLA1T
Vespa 50 Special
Vespa 125 Primavera - ET3 VMB1T/VMA1-2T
Vespa 50
Vespa 90
Vespa 125
Vespa 150
Material: Aluminum
Side stand reinforcement plate for Vespa 50-125/PV/ET3/PK 50-125/PX80-200 E Lusso/'98/MY/'11/T5
Vespa 50-125/PV/ET3/PK 50-125/PX80- 200 E Lusso/'98/MY/'11/T5
thickness=3 mm
stainless steel/V2A
Stator cable restoration kit for Vespa 125 Primavera VMA1>2T/GT/GTR/TS-150 VBB2T/Sprint V/180 Rally/SS
Vespa 125 Primavera VMA1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa GT
Vespa 150 VBB2T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T (without battery)
Vespa 180 Rally VSD1T
5 Wires already wired with round eyelets as original.
Vespa 125 Primavera ET3 VMB1T
"TOTAL BLACK" glossy version badge kit for Vespa 50 Special, V5B1T 38640 -> V5B3T
Vespa 50 V5B1T 38640 >
Vespa 50 V5B3T
Vespa 50 V5SA1T 69245> (Switzerland)
Vespa 125 VNA1T>2T
Vespa 125 VNB1T>2T
Finish: Galvanized
Vespa 50 N V5A1T
Vespa 50 L V5A1T
Vespa 50 R V5A1T
"TOTAL BLACK" Kit for Vespa 125 GTR/TS-150 Sprint V./180/200 Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 125 GT VNL1>2T
Vespa 150 GL VLA1T
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
Trapezoidal Shape (90x150 mm)
Black fender crest for Vespa 125 GT/GTR 1°/150 GL/Sprint/V 1°/160 GS/180 SS/Rally
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T > 127357
Vespa GL 150 VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce > 172650
Vespa GS 160 VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Fixing plates
Complete sport seat RDV Race one V2.0 in black color with yellow stitching for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 90 V9A1T Vespa 125 Primavera VMA1T>2T Vespa 125 Primavera ET3 VMB1T
The brand new "RDV race one" V2.0 sports saddle is a perfect combination of sporty aesthetics (yellow stitching, sporty seating in harmony with the Vespa curves) and good comfort (plastic molded base with metal core, 2.5 cm foam for the seat), innovative magnetic closure to ensure maximum aesthetic result, designed and conceived entirely by our Staff, made with the technical support of Nisa SRL. 100% MADE IN ITALY.
Sport RDV Race one V 2.0 complete seat in black with black stitching for Vespa 50/90/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R Vespa 50 Special V5A2>3T Vespa 50 Special V5B1>4T Vespa 90 V9A1T Vespa 125 Primavera VMA1T>2T Vespa 125 Primavera ET3 VMB1T
The brand new "RDV race one" V2.0 sport saddle is a perfect blend of
sporty aesthetics (black stitching, sporty seat in harmony with the
Vespa curves) and good comfort (plastic molded base with metal core, 2.5 cm foam for the seat), innovative magnetic closure to ensure the best aesthetic result, designed and conceived entirely by our Staff, realized thanks to the technical support of the company Nisa SRL. 100% MADE IN ITALY.