Classic Vespa
Vespa PE 200
Vespa 200 Rally VSE1T
Vespa 200 Cosa
Painted in black
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
Pinasco touring classic 2.0 exhaust for Vespa 200 Rally/PE
Vespa PE 200
Vespa 200 Rally VSE1T
Painted in black
The PINASCO TOURING muffler has been designed to enhance the engine's performance both at low and high revs while maintaining the same level of quietness. The innovative design that “breaks all current patterns” has been studied to achieve the right gas expansion, which significantly increases engine performance (about 4HP) even at full stretch.
Front wheel hub for Vespa 50 N/L/R-Special/125 Primavera ET3-PK S-XL
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 SS V5SS1>2T
Vespa 50 PK S/XL
Vespa 90 V9A1T
Vespa 90 SS V9SS1>2T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Malossi elastic ring in high-toughness tempered steel clutch pack tightening for Vespa 125/150 VNB-GT-GTR-TS-PX-VBB-GL-Sprint-Sprint Veloce
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Elastic ring Malossi in high-toughness tempered steel clutch pack tightening for Vespa 200 PX-PE
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Malossi 7 Springs Clutch Kit POWER UP CLUTCH SYSTEM for Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
The Malossi range for the Vespa offers products with extremely high technology capable of developing performance increases
so exceptional compared to the standard, that it requires the adaptation of other fundamental components
of the vehicle.
Just compare a Vespa PX 200 E produced in 1978, which originally develops a power of 12.35 HP at 5700 RPM, with a Vespa "tuned" with Malossi Kits, which can develop 27.5 HP at 8000 RPM, or more than double
HP at an extremely higher rotation speed, to understand that it was absolutely essential to design a clutch unit capable of withstanding the stresses due to a performance increase of such proportions!
The POWER UP CLUTCH SYSTEM Malossi clutch units are designed to provide a response and overcome all the problems that inevitably arise when the clutch unit technology is not adequate to the other engine components. A traditional clutch, having to transmit more than double the power to the gears, while simultaneously rotating much faster, can lead to bell failures under the effect of
centrifugal force, slipping and deformations that translate into annoying and unsettling metallic noises, up to the classic clutch slipping caused by
Primary gear set with extended Malossi ratio (Z23-64) straight teeth with sprocket (8 springs) complete with shock absorber for Vespa 125/150/200 PX-PE-Rainbow-Disc brake-Cosa
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved with special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
The HTQ Malossi gears are made using only materials that exceed the strict standards imposed by our technicians through rigorous tests and trials.
The final machining uses CNC machines,
after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C, giving them the required hardness and strength.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Primary gear set with extended Malossi ratio (Z24-63) straight teeth with sprocket (8 springs) complete with shock absorber for Vespa 125/150/200 PX-PE-Arcobaleno-Disc brake-Cosa
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
The HTQ Malossi gears for Vespa PX inherit the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-tooth configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved through special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
The HTQ Malossi gears are made using exclusively materials
that exceed the very strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses CNC machines,
after which the HTQ Malossi gears undergo a complete
thermochemical carburizing treatment at 900°C, giving them the
hardness and
resistance required.
The size and quality of the finished gears are finally verified on
Zeiss three-dimensional control machines.
Primary couple with extended Malossi ratio (Z 23/64) for Vespa 200 PX-Rally-Cosa
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Rainbow VSX1T
Vespa PX 200 E Rainbow Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
The HTQ Malossi gears for Vespa PX carry the legacy of the first gear project produced by Malossi between the late 80s and early 90s.
Completely redesigned, this pair of primary gears uses a straight-toothed configuration instead of the standard helical ones.
Malossi has worked hard to ensure the exceptional quietness of the gears, achieved through special machining of the teeth and their contact surfaces, meticulously finished and verified with an involute tester.
The HTQ Malossi gears are made using only materials that exceed the very strict standards imposed by our technicians with rigorous tests and trials.
The final machining uses numerically controlled machines, after which the HTQ Malossi gears undergo a complete thermochemical carburizing treatment at 900°C that gives them the required hardness and resistance.
The size and quality of the finished gears are finally verified on Zeiss three-dimensional control machines.
Paired two by two to ensure the correct operating clearance, the HTQ Malossi gears are the most precious gift a true romantic enthusiast can give to their Vespa.
Vespa 125/150/200
Malossi straight-tooth primary transmission gear set Z 27x69 for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The power developed by an engine, whether standard or modified, will be pointless if it is not transmitted to the wheels in the most efficient and effective way, without unnecessary friction and waste of mechanical energy.
Malossi, a leader in the production of high-performance components for the scooter world, has focused all its know-how by completely redesigning the primary transmission for the classic Vespa "small frame" to ensure that the maximum power is transformed into road performance.
The new Malossi primary transmission for the Vespa is a true concentration of engineering. From the highest quality materials to the attention to detail and the quality of mechanical processes, everything is brought to a very high level. From the bronze bushing to the clutch basket and gears, everything is worked separately to ensure that each individual component is produced according to the highest quality standard.
The core of the innovations introduced in this transmission is the new clutch bell, made from special solid steel and characterized by six slots for the clutch discs, all six "active" and designed to lock the discs. In this way, all mechanical play is minimized, as are vibrations and the consequent wear of the basket itself and the guide teeth of the discs.
The new primary transmission is also
Malossi Z 24x72 straight-tooth primary transmission gear set for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The power developed by an engine, whether standard or modified, will be pointless if it is not transmitted to the wheels in the most efficient and effective way, without unnecessary friction and waste of mechanical energy.
Malossi, a leader in the production of high-performance components for the scooter world, has concentrated all its know-how by completely redesigning the primary transmission for the classic Vespa "small frame" to ensure that the maximum power is transformed into road performance.
The new Malossi primary transmission for the Vespa is a true concentration of engineering. From the highest quality materials to the attention to detail and the quality of the mechanical processes, everything is brought to a very high level. From the bronze bushing, to the clutch basket and the gears, everything is processed separately to ensure that each single component is produced according to the highest quality standard.
The heart of the innovations introduced in this transmission is the new clutch bell, made from special solid steel, characterized by six slots for the clutch discs, all six "active" and aimed at locking the discs. In this way, all mechanical play is reduced to a minimum, as well as vibrations and the consequent wear of the basket itself and the guide teeth of the discs.
<
Big bore manifold attachment 52 expansion exhaust VMC Kifly handcrafted for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Big bore manifold 62 attachment handcrafted VMC Kifly expansion exhaust for Vespa 50/90/125 Primavera ET3
Vespa 50/90/125 Primavera ET3
Complete thermal group PIAGGIO (125cc) in cast iron for Vespa PX-TS-GTR
Vespa 125 PX VNX1>2T
Vespa 125 PX ZAPM 74100
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Transfers: 3
Diameter: 52.5 mm
Stroke: 57 mm
Vespa 50 Special V5B1>4T
Vespa 50 V5SA1T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
PIAGGIO thermal group (200 cc) in cast iron for Vespa 200 PX-PE-Rally
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1>2T
Diameter: 66.5 mm
Stroke: 57 mm
Notes: Without head
Bedding -Vespa 150ccm Italian Style- Size: 135x200cm / 80x80cm, blue, 100% cotton
The reversible Vespa bedding is printed with different patterns on the front and back. So it's up to you to choose the side you want to see on your bed.
Made of 100% cotton in fine and dense Renforcé quality. This makes it pleasantly soft and particularly light and smooth. Thanks to the zipper, the bedspreads and pillowcases can be put on quickly and easily.
Vespa reversible sheets
consisting of duvet cover and branded zipper pillowcase
suitable for all year round
Machine washable at 60 degrees
100% cotton (Renforcé)
dimensions: 135x200cm / 80x80cm
tested for harmful substances according to Öko Tex Standard 100
blue
100% cotton
Vespa 125
Vespa 150
Vespa 150 Sprint VLB1T > 025390
Vespa 150 GS VS1T>5T
With 2 Keys
Finish: Chrome
Front fiberglass fender for Vespa 50/90/125 Special-N-L-R-Primavera-ET3 with ZIP SP-ET2-Quartz fork
Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Product made of fiberglass with high-quality glass fiber. In critical
points (if necessary), they are reinforced with carbon fiber and
kevlar. The high quality of the molds in which they are processed ensures
that the final product has an excellent paint finish and
great ease of assembly. Strength, lightness, and elasticity
are the main features, derived from the use of advanced and professional materials.
Vespa PK 50/S/XL
Vespa PK 125/S/XL
Painted in black color, with a large ball
Vespa 125/150/200 COSA 1
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
Including prisoners and brass trim
Various pockets and compartments;
Spare wheel holder for Vespa 98/125 V1-15/V30-33/VM/VN/VNA/VNB/150 VL/VB/VBA/VBB
Vespa 98
Vespa 125 V30>33T
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 125 VNB1>6T
Vespa 150 VBB1>2T
Vespa 150 VBA1T
Vespa 150 VB1T
Vespa 150 VL1>3T
.
DELL'ORTO carburetor valve spring for carburetor UB23 S Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
Floating pin DELL'ORTO for carburetor UB23 S Vespa 150 GS VS1-5T
Vespa 150 GS VS1>5T
Vespa 90/125
For SHBC 19-19 / SHBC 19-19 E carburetors
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 125/150/200 Cosa
Vespa 125 PX T5 VNX5T
Vespa 125/150 PX New Model
Specific fuel hose kit for unleaded petrol (60cm) for Vespa 125/150/200 PX-PE
Vespa 125/150/200 PX-PE
Size: 7x14 mm
Includes hose clamps (diam. 14mm)
Vespa 125 PX VNX1T> VNX2T
Vespa 125 T5 VNX5T
Vespa 125 Cosa VNR1T>2T
Vespa 150 PX VLX1T
Vespa 150 Cosa VLR1T>2T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1T
Dimensions-->Ø 4x7 mm
High-performance tube that does not harden over time, flame-retardant.
Oil tank fitting with filter for Vespa 125/150/200 PX with mixer - Rally
Vespa 125 PX ZAPM74100
Vespa 125 PX Cat ZAPM50100
Vespa 125 PX Millennium VNX1T
Vespa 125 PX Arcobaleno VNX2T
Vespa 125 PX T5 VNX5T
Vespa 150 PX ZAPM74200
Vespa 150 PX Millennium VLX1T '98
Vespa 150 PX Arcobaleno VLX1T
Vespa 180 Rally VSD1T
Vespa 200 PE Arcobaleno VSX1T
Vespa 200 PX Millennium VSX1T
Vespa 200 Rally VSE1T
Vespa V50/PV/ET3/125 GT/GTR/Super/
TS/150 Sprint/V/Super/180
/200 Rally/GS160/SS180/PK50
125/ PX80-200/T5