Malossi Z 24x72 straight-tooth primary transmission gear set for Vespa 50/90/125 Special-N-L-R-Primavera-ET3-PK
Original reference: 6717308
The power developed by an engine, whether standard or modified, will be pointless if it is not transmitted to the wheels in the most efficient and effective way, without unnecessary friction and waste of mechanical energy.
Malossi, a leader in the production of high-performance components for the scooter world, has concentrated all its know-how by completely redesigning the primary transmission for the classic Vespa "small frame" to ensure that the maximum power is transformed into road performance.
The new Malossi primary transmission for the Vespa is a true concentration of engineering. From the highest quality materials to the attention to detail and the quality of the mechanical processes, everything is brought to a very high level. From the bronze bushing, to the clutch basket and the gears, everything is processed separately to ensure that each single component is produced according to the highest quality standard.
The heart of the innovations introduced in this transmission is the new clutch bell, made from special solid steel, characterized by six slots for the clutch discs, all six "active" and aimed at locking the discs. In this way, all mechanical play is reduced to a minimum, as well as vibrations and the consequent wear of the basket itself and the guide teeth of the discs.
<
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Related articles
BCR thermal group (50cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2>3T/50 Special V5B1>4T/50 PK/
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore--> 38.4 mm
Ape 50
Bore--> 38.4 mm
Pinasco "Zuerino" SVR thermal group (102cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2>3T/50 Special V5B1>4T/50 PK/
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 and Ape 50 with a 43mm stroke. Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to that of its bigger brother, using the same RD350-type reed valve pack and the same flow guide, it mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a generous engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and commonly called "banana" stamped exhausts but can also be used in more advanced setups.
Pinasco "Zuerino" SVR Thermal Group (102cc) for Vespa 50 PK (manifold Ø19-19)
50 HP
The Pinasco 102cc SRV "Zuerino" Ø 55mm thermal group is a new product dedicated to the world of Vespa 50 with a 43mm stroke.
Based on the famous Zuera 135cc, the 102cc SRV "Zuerino" features a transfer system very similar to its bigger brother, uses the same RD350 type reed valve pack and the same flow guide, mounts a single-ring piston with bi-conical pin, the new central spark plug head with 8 studs and centering bushings that definitively eliminates the problem of leaks and consequent performance drops with a compression ratio of 12.3:1.
The Pinasco 102cc SRV is a copious engine designed to make the most of power at low revs, its exhaust port has been designed to work correctly with original exhausts and stamped mufflers
commonly called "bananas" but can also be used in
more advanced setups.
It does not require special modifications to the engine case, it can be used with
all crankshafts on the market including the original ones, its
installation allows the use of engine
Complete thermal group BCR (102cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore--> 55 mm
Complete thermal group BCR (75cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
Bore--> 47 mm
Ape 50
Bore--> 47 mm
Bevel gear primary drive pair z22 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and the pinion.
With this system, the key does not need to be used. Ideal
for tuned engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply a strong type of locking agent on the
fastening nut and to respect the tightening torque of 60-70 Nm.
A 3-thread extractor is required for disassembly, not included.
Bevel gear primary transmission pair z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type threadlocker on the
fastening nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
Bevel gear primary transmission pair z24 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type locking agent on the
fastening nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
Bevel gear primary transmission pair z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong threadlocker on the
fastening nut and to respect the tightening torque of 60-70 Nm.
A three-thread puller is required for disassembly, not included.
Bevel gear primary transmission pair z25 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for tuned engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type threadlocker on the
fixing nut and to respect the tightening torque of 60-70 Nm.
A 3-thread puller is required for disassembly, not included.
Bevel gear primary transmission pair z26 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts and interchangeable. It is recommended to apply strong type threadlocker on the
fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
Bevel gear primary transmission pair z27 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type locking compound on
the fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread extractor is necessary, not included.
Bevel gear primary transmission pair z23 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and
for crankshafts damaged at the key seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type locking compound on
the fastening nut and to respect the tightening torque of 60-70 Nm.
A 3-thread puller, not included, is required for disassembly.
Bevel gear primary transmission pair z24 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the
key seat.
The cone is compatible with the entire range of Piaggio
crankshafts and interchangeable. It is recommended to apply a strong type of locking agent on the
fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
Bevel gear primary transmission pair z25 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the key
seat.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type lock
on the fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.
Three-hole puller for disassembling the conical gear of the primary transmission for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Provided are no. 3 M4 screws with recessed hexagon and one central hex head screw no. 13
Required wrench: 19
Lock pinion-primary transmission pair tightening bevel gear for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
The gear lock is used to easily block the primary transmission of your Vespa smallframe engine.
By placing the component between the sprocket and the gear, thanks to its asymmetrical shape,
we can securely and stably block the normal rotation of the gears.
Thermal group VMC RV-A 100 (100cc) for Vespa 50 V5A1T N/L/R/50 Special V5A2
Vespa 50 V5A1T N,L,R, Vespa 50 Special V5A2>3T, Vespa 50 Special V5B1>4T, Vespa 50 PK, Ape 50
VMC has developed a superior class cylinder with this lamellar to the RV-A 100 cylinder.
The technical solutions on this cylinder allow performances that were previously reserved for long-stroke cylinders.
The cylinder is made of aluminum with a Nikasil coated barrel and lamellar intake.
The head is CNC machined, with a viton gasket and secured with eight M6 bolts.
It has a bore of 54 mm and a stroke of 43 mm, 8 transfers
Exhaust port with bridge with an outlet diameter of 28 mm and stud spacing of 52 mm
Phases 113° intake and 171° for the exhaust
The manifold has an internal diameter of 25 mm and is equipped with a four-petal reed pack.
Included in the kit are the original valve closure cap screw kit and gasket kit in paper of different thicknesses.
Recommended carburetor sizes: 19 - 24 mm
VMC primary transmission gear z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VMC primary transmission gear z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VMC primary transmission gear z22 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VMC primary transmission gear z25 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
VMC primary transmission gear z26 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Crimaz cone sprocket mounting kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
EVOK primary transmission gear z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Made in Italy
EVOK primary transmission gear z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Made in Italy
Bevel gear primary transmission pair z26 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.
With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the keyway.
The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type locking compound on
the fixing nut and to respect the tightening torque of 60-70 Nm.
For disassembly, a 3-thread puller is required, not included.