Classic Vespa
BGM PRO crankshaft bearing and oil seal kit FKM/Viton® (E10/ethanol resistant) for Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
Vespa 125/150 VM/VN/VL/VB1T/VNA/GS
WIDE FRAME ENGINE ISSUE: The BGM Pro and Corteco oil seals, of much higher quality, are available (for safety reasons) only with a 0.8 mm sheet metal coating. If installed in a wide frame engine, the crankshaft bearings deform, causing damage to the bearings.
WIDE FRAME ENGINE SOLUTIONS: The circumferential bead of the oil seal is flattened, reducing the height of the oil seal plate by approximately 0.3 mm. The bearings then move freely. b) The BGM Pro bearing set with special FAG 9-ball bearings. In this case, the bearing shoulders have been precisely machined to ensure stress-free mounting of the crankshaft bearing. The set includes high-quality, durable BGM Pro FKM/Viton® oil seals.
Stainless steel spare wheel cover for Vespa PX80/125/150/200/PE/Lusso/T5
Vespa PX (all)
Vespa PE (all)
Chrome
Metal
Fixing screw
Complete corteco oil seal kit cone 19 for Vespa 50/90/125 Primavera ET3
Vespa 50
Vespa 90
Vespa 125 Primavera
Vespa 125 Primavera ET3
Including OR'ing
Vespa 150 VB1T
complete kit of Aluminum strips, rubber, end caps, rivets, screws.
Vespa 150 VL3T
Vespa 150 VB1T
In Steel, nickel-plated
Pair of right and left side panels for Vespa 125/150/200 PX-PE Without indicators
Vespa 125 PX VNX1T
Vespa 150 PX VLX1T
Vespa 200 PE VSX1T
For Models WITHOUT arrows
Inner ring secondary shaft right-hand thread for Vespa 125/150 VM-VN-GS-VB
secondary gear shaft right-hand thread for Vespa 125/150 VM-VN-GS-VB
Mounting plates
Black hub cover for Vespa 125/150/180/200 VNB-Super-TS-GT-GTR-Sprint-Sprint Veloce-Rally
Vespa 125 VNB6T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Pair of black strips for fixing mat for Vespa 125/150/160/180/200 VNB/VBA/VBB/Super/Sprint/TS/GT/GTR/Rally/SS
Vespa 125 VNB3>6T
Vespa 125 Super VNC1T
Vespa 125 TS VNL3T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 150 VBB1T > VBB2T
Vespa 150 Super VBC1T
Vespa 150 GL VLA1T
Vespa 150 VBA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 160 GS VSB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
In Stainless steel
Included: Self-tapping screws
Complete black strip kit for 108 Project footboard for Vespa 125 GT/GTR/TS/150 Sprint-S. Veloce-180/200 Rally
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 SS VSC1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Powder coating, very durable.
Black Aluminum shield edge for Vespa 125 Super-GT-GTR-TS/150 Sprint-S.Veloce
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Original
Vespa 200 PE VSX1T
Vespa 200 Cosa VSR1T 3016725>
Vespa 200 Rally VSE1T
Vespa Cosa 1 Adaptable
Note: Original Piaggio
Chrome headlight frame for Vespa 50-125/S (CH)/SR (D)/SS/90(RC)/R/SS/PV/ET3/Super/150 Super
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 Super VNC1T
Vespa 150 Super VBC1T
Diameter: 115 mm
EVOK complete optical group full LED 3000 lumens with converter for Vespa 50 Special V5B3T/Elestart
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Dimensions: 90x140 mm
In addition to the basic version, we have added our proprietary voltage
converter that optimizes the headlight's performance even without a battery.
Technical specifications of the Evok Iron Led complete front headlight:- 12 Volts;- 25 Watts;- 3000 Lm power;- 6500K Led (Cool white light);- Specific shape for 50 Special. Installation is carried out respecting the colors of the original system.
Vespa 125 GT VNL1>2T
Vespa 150 GL VLA1T
Vespa 180 SS VSC1T
Vespa 150 Sprint VLB1T
Trapezoidal Shape (90x150 mm)
Reinforced gear shift rod screw for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2
Vespa 50-125/PV/ET3/PK50 -125/S/XL/XL2
Ref.Orig: 098787
Reinforced model
Oil can support - luggage rack for internal shield -MRP- Vespa Smallframe, Largeframe 10 inches - to be mounted on the thread for the front spare wheel support - right side
All models
Vespa 50/90/125/150/160/180/200
Vespa PX
Vespa PE
Vespa PX Rainbow
Vespa PE Rainbow
Black metal headlight frame for Vespa 125 GTR/TS/150 SprintV/180-200 Rally
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 150 Sprint Veloce VLB1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Diameter: 130 mm
Couple of G piston pin stops Polini for Vespa 50 Special V5B3T/90 V9A1T-125 Primavera ET3-PK
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS
Vespa 125 PK
5 Faston original Piaggio voltage regulator for Vespa 125/150/PE/PX200E /Luxury/T5/2011
Vespa 125/150/PE/PX200E /Lusso/T5/2011
Vespa 50 PK FL V5N1T
Vespa 50 PK HP V5N2T
Vespa 50 N Plurimatic V5P1T
Vespa 125 N (FL) VMX7T
Color--------------> Black
Internal cable------> 1810 mm
Ø------------------- -> 2.5mm/7.0 mm
Sheath-------------> 1630mm
FB 36 clutch spring kit Fabbri Racing for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
For Fabbri racing clutches
Multiple gear Fabbri Racing 10-14-17-19 THIRD AND FOURTH SHORT triangle section + z=47 Vespa 50, 90, 125 ET3 Primavera, PK + spider
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The cluster 10 14 17 19 meshes with original Vespa sprockets: 58 54 50 and
dedicated fourth gear z47 Compatible with Vespa/ape50 Piaggio engine cases and
aftermarket. The smaller gap in gear shifting from second to third to fourth,
allows the engine to stay in power band reaching maximum speed
in less time. Ideal for tuned engines or track configurations.
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK ETS
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Dimensions: 20x47x14 mm (Flywheel side )
Roller bearing gear shaft 16x22x12 mm for Vespa 50 N 2°/L/R/S 2°/SR/SS/90 2°/100/125/PV/ET3/PK50-125/XL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Measurements: 16x22x12 mm
SKF clutch bell bearing 25x47x8 mm (16005) for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 ETS VMS1T
Vespa PK
Dimensions: 25x47x8 mm
SKF bearing 6200/C3 gear shaft SKF 10x30x9 mm for Vespa 50-125/Primavera/ET3/PK50-125/S/XL/XL2-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK
Measurements: 10x30x9
SKF crankshaft bearing clutch side 17x47x14 mm (6303-C3) for Vespa 50-125/PV/ET3/PK50-125/S/XL/XL2/Ape 50
Vespa 50
Vespa 90
Vespa 125 Primavera ET3
Vespa 125 PK ETS
Measurements: 17x47x14 mm (C3)
SKF wheel hub bearing 6204-C5 20x47x14 mm for Vespa 50/90/125/150/200
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa PK
Vespa 150 GS VS5T
Vespa 150 VB1T
Vespa 180 Rally VSD1T
Vespa PX/PE
Measurements: 20x47x14 mm
Needle roller bearing kit for multiple gear shaft for Vespa 125 VNA-TS/150 VBA-Super/160 GS/180 SS/180-200 Rally/PX125-200/PE/Lusso/Cosa/T5
Vespa 125 VNA1T > VNA2T
Vespa 125 VNB1T > VNB6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL1>2T
Vespa 125 TS VNL3T
Vespa 125 GTR VNL2T
Vespa 125 PX VNX1>2T
Vespa 150 Super VBC1T
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa PE
2x11.8 mm
21 pieces
SKF bearing 6302-C3 15x42x13 multiple gear (shock absorber) for Vespa 125 GT/Super 2°/150 Sprint/Super/PX125-150X 2°/PX125-150 E/Lusso/'98/MY/'11/Cosa 125-150 1/2-LML Star 125-200 2T/4T
Vespa 125/150
Vespa 125 T5 VNX5T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PX
Vespa 200 Cosa 1/2
Dimensions: 15x42x13
Roller bearing gearbox shaft 28x35x13 mm for Vespa 125 GT 2°/GTR/Super 2°/TS/150 GL 2°/Sprint 2°/V/Super 2°/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 Super VNC1T 024900>
Vespa 125 GT VNL1T 60900>
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX VNX1>2T
Vespa 125 PX T5
Vespa 150 Super VBC1T 70200>
Vespa 150 Sprint VLB1T 73900>
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX VLX1T
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa 200 PE VSX1T
Measurements: 28x35x13 mm
Nadella roller bearing flywheel side 25X38X15 mm for Vespa PK125 S 2°/ETS/N/XL/XL2/125 GTR 2°/TS 2°/150 Sprint V 2°/Super 2°/200 Rally 2°/PX80-200/PE/Lusso/Cosa
Vespa 125 GTR VNL2T 145901>
Vespa 125 PX
Vespa 125 TS VNL3T 18139>
Vespa 125 PK ETS VMS1T
Vespa 125 PK
Vespa 150 Super VBC1T 412374>
Vespa 150 Sprint Veloce VLB1T 0294260>
Vespa 150 PX
Vespa 200 Rally VSE1T 0033997>
Vespa 200 PE
Measurements: 25X38X15
Nadella Bearing Crankshaft for Vespa 125 VM/VN-VNA-VNB-GT-GTR-TS-PX-Super-150 VL-VB1T-GS-VBA-VBB-Super-GL-Sprint-PX-160 GS-180 SS-200PE-Rally
Vespa 125 from 1953
Vespa 150 from 1954
Vespa 160
Vespa PX
Vespa PE
Measurements: 25x62x12 mm
Polini HT FOR RACE Z 23 clutch for primary Z65 helical teeth for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5 230.0531
Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
The Polini "HT Clutch for Race" is an innovative racing clutch, designed for the most demanding riders. Designed for Vespa Largeframe, it offers exceptional performance thanks to advanced technologies.
Main features:
-Reduced mass on the crankshaft and numerous adjustment options.
-Suitable for high torque.
-Lightweight aluminum construction to improve performance.
-Needle bearing to reduce friction and improve shifting.
-Aluminum friction discs to optimize grip and power transmission.
Vespa 50 V5A1T N/L/R
Vespa 50 Special V5A2T
Vespa 50 Special V5B3T
Raw Finish
Note: Printed up to half frame