Crankshaft bearing SKF flywheel side 20x47x14 mm (6204-C3) for Vespa 50 2°/N/L/R/S 2°/Special/SR/SS/PK50/S/SS/XL/XL2/Ape 50 gear shaft wheel side for Vespa 50-125/PV/ET3/PK/XL/XL2/125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso 1°-Ape 50
Dimensions: 20x47x14 mm (Flywheel side )
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 90 V9A1T
Related articles
Mazzuchelli crankshaft advanced cone 19 for Vespa 125 Primavera ET3
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Anticipated
Cone: 19mm
Complete crankshaft like the original (19 mm cone) for Vespa 50 N/L/R-Special-PK 1st series-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK S
ECONOMIC Version
Cone: 19
Mazzuchelli crankshaft for Vespa PK50/S/SS/XL/XL2/FL/HP/N/Rush-Ape 50
Vespa 50 PK XL
Vespa 50 PK N
rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S
Cone 19 mm / Cone 19 mm
Stroke 51
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is forged, designed to withstand any type of stress.
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL
Cone 20 mm / Cone 20 mm
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.
Crankshaft Pinasco Anticipated (19 mm cone) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK (1st series)
Cone 19 mm / Cone 19 mm
Made of forged steel, CNC machined. The shaft is produced with numerous heat treatments that ensure maximum quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.
Pinasco Anticipated Crankshaft (20 mm cone) for Vespa 50 N-L-R-Special-PK-XL-N-HP-FL-Ape 50
Vespa 50 PK XL V5X3T
Vespa 50 PK N
Vespa 50 PK HP
Cone 20 mm / Cone 20 mm
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure the highest quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.
Pinasco Anticipated Crankshaft (20 mm cone and 45 mm stroke)
Vespa 50 PK XL V5X3T
Vespa 50 PK N
Vespa 50 PK HP
Cone 20 mm
Made of forged steel, CNC machined. The shaft is made with numerous heat treatments that ensure maximum quality and reliability. The connecting rod is made by forging, designed to withstand any type of stress.
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S
51 mm stroke, roller cage included, quality guaranteed.
Mazzuchelli crankshaft (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Vespa 50 PK XL /N/HP
Ape 50
Stroke 43 mm
Polini For Race crankshaft (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Vespa 50 PK XL /N/HP
Ape 50
Stroke 43 mm
Jasil crankshaft with advanced timing (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Vespa 50 PK XL /N/HP
Ape 50
rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12
VMC crankshaft stroke 43, cone 20, rod 87 cnc for Vespa 50 PK XL/N/HP/FL
Vespa 50 PK XL /N/HP
Ape 50
stroke 43, cone 20, rod 87 cnc
VMC ROTARY VALVE crankshaft, stroke 43, cone 20, rod 87 cnc, for Vespa smallframe
Also perfect when mounted with reed valve intake to the crankcase.
Made in Italy with the best materials and treatments, it weighs over 1.5kg
No need to bore the crankcases, the shoulders are 82mm and 86.5mm
It is recommended to use rollers cages wider than the original Piaggio ones.
WARNING:
THE CRANKSHAFT DOES NOT HAVE THE LATERAL LIP ON THE VALVE SHOULDER LIKE THE ORIGINAL CRANKSHAFTS
THEREFORE ON SOME CRANKCASES THE VALVE MAY NOT SEAL.
THE CRANKSHAFT CAN BE MOUNTED ON REED VALVE INTAKES TO THE CRANKCASE
Ideal for VMC 100 RVA
Jasil crankshaft original version (20 mm cone) for Vespa 50 PK XL/N/HP/FL-Ape 50
Vespa 50 PK XL /N/HP
Ape 50
rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12
Mazzuchelli advanced crankshaft for Vespa PK50/S/SS/XL/XL2/FL/HP/N/Rush-Ape 50
Vespa 50 PK XL
Vespa 50 PK N
rotary disc valve
stroke: 43.0mm
connecting rod: 87.0mm
cone 20/20mm, M12
Crankshaft TNT cone 20 rod 87 stroke 43 mm for Vespa PK50/S/SS/XL/XL2/FL/HP/N/Rush
Vespa PK50/S/SS/XL/XL2/FL/HP/N/Rush
Cone 20 mm, stroke 53 mm, connecting rod 100 mm
shoulders 86mm (boring required)
Fabbri Racing "MOWER" Evo full circle crankshaft 83mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Crankshaft Full Shoulders with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
The use of a crankshaft with 83 mm shoulders does not require boring the engine casings.
Fabbri Racing recommends using a 6204 bearing instead of the 6303 on the transmission side, paired with a specific oil seal with dimensions of 27x47x6 mm.
Bearings and oil seals are not included in the kit and must be purchased separately.
The recommended balance factor for pistons with a diameter between 57 and 60 mm is between 45 and 50.
Technical specifications:
Flywheel side bearing seat diameter: 20 mm
Clutch side bearing seat diameter: 20 mm
Flywheel side oil seal seat diameter: 20 mm
Clutch side oil seal seat diameter: 27 mm
Weight: approximately 1.4 kg
Fabbri Racing "MOWER" crankshaft with Primatist rod, full cheeks 83mm, taper 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
The use of a crankshaft with 83 mm shoulders does not require boring of the engine cases.
Fabbri Racing recommends using a 6204 bearing instead of the 6303 on the transmission side, paired with a specific oil seal with dimensions of 27x47x6 mm.
Bearings and oil seals are not included in the kit and must be purchased separately.
The recommended balance factor for pistons with a diameter between 57 and 60 mm is between 45 and 50.
Technical specifications:
Flywheel side bearing seat diameter: 20 mm
Clutch side bearing seat diameter: 20 mm
Flywheel side oil seal seat diameter: 20 mm
Clutch side oil seal seat diameter: 27 mm
Weight: approximately 1.4 kg
BGM PRO Racing crankshaft (rotary valve) stroke 51mm rod 97mm cone 20 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Material:
The BGM crankshafts are forged according to the traditional Piaggio method. High temperature and pressure forging compacts the material, making it denser, improving heat dissipation, and increasing resistance to deformation. This represents a significant advantage over crankshafts from other manufacturers, often inferior even to standard ones.
Tuning:
The high quality of the material allows the use of very light flywheels without compromising reliability. This improves acceleration and engine longevity, particularly useful in high-performance engines and high revs.
Improvements:
An additional advantage is the ability to convert to 12V electronic ignition, necessary for the use of this type of crankshaft on models like Vespa 50 or Primavera 125.
With the BGM ignition kit, even 6V Vespas can benefit from modern halogen lighting.
Timing angle:
The timing angle is greater than that of a standard 125cc crankshaft.
With modified cylinders, an original crankshaft does not offer sufficient intake time, limiting performance.
Our crank
Dexter Racing full circle crankshaft 83mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
-shoulder diameter 83mm (no need to bore)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Dexter Racing full circle crankshaft 83mm, taper 19, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK-Ape 50
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Circle Crankshaft with 83 mm webs, 51 mm stroke, 97 mm copper-plated rod, and 19 mm taper.
-webs diameter 83mm (no boring needed)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Albero motore Egig Performance spalle piene 88 mm, cono 20, biella 116, corsa 54 per Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Ø Sede del paraolio lato volano: 20 mm
Ø Sede del cuscinetto lato frizione: 20 mm
cuscinetti 6204 su entrambi i lati
paraolio lato frizione 27x47x6
paraolio lato Volano 20x32x7
Fabbri Racing full circle crankshaft 88 mm, cone 20, rod 117, stroke 54 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 88 mm shoulders, 54 mm stroke, 117 mm connecting rod, and 20 mm taper.
requires casing boring
Dexter Racing full circle crankshaft 87mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK-Ape 50
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Ape 50
Full Circle Crankshaft with 87 mm webs, 51 mm stroke, 97 mm copper-plated connecting rod, and 20 mm taper.
-web diameter 87mm (requires boring)
-width 35mm (standard)
-stroke 51mm
-weight approximately 1.3kg
Fabbri Racing "MOWER" Evo full circle crankshaft 87 mm, cone 20, rod 97, stroke 51 for Vespa 50/90/125 Primavera-ET3-PK
Vespa 125 Primavera VMA1T>2T
Vespa 125 Primavera ET3 VMB1T
Vespa 125 PK S/XL/N/HP
Full Shoulder Crankshaft with 83 mm shoulders, 51 mm stroke, 97 mm copper connecting rod, and 20 mm taper.
The use of a crankshaft with 83 mm shoulders does not require boring of the engine cases.
Fabbri Racing recommends using a 6204 bearing instead of the 6303 on the transmission side, paired with a specific oil seal measuring 27x47x6 mm.
Bearings and oil seals are not included in the kit and must be purchased separately.
The recommended balance factor for pistons with a diameter between 57 and 60 mm is between 45 and 50.
Technical specifications:
Flywheel side bearing seat diameter: 20 mm
Clutch side bearing seat diameter: 20 mm
Flywheel side oil seal seat diameter: 20 mm
Clutch side oil seal seat diameter: 27 mm
Weight: approximately 1.4 kg