Lamellar thermal group CCcorsa in aluminum (160 cc) for Vespa faro basso 125/150 VM-VN-VL-VB1T
This kit has been designed and studied for plug & play assembly,
it does not require any type of machining of the engine casing.
The power developed is 17 HP at 7000 rpm and reaches up to 8500 rpm if
correctly configured. In terms of performance and reliability
nothing to say, 2 years of road testing have been carried out on this product and in the summer of 2019 it covered 10000 km going to and returning
from Nord Kapp.
The kit's production is purely artisanal, coming from
sand castings strictly Made in Italy to provide those
qualities of quality and reliability that distinguish it. It can
be installed on any type of low headlight casing with 3
studs starting from the year 1953. Having the short insertion collar
in the casing, it does not require any machining. It requires the
installation of a 57 stroke crankshaft, 110 rod.
The kit includes: head, cylinder, piston, reed valve pack,
intake manifold, exhaust manifold, rubber sleeve for
24 PHBL carburetor, gaskets, and
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Related articles
Power Clutch Kit 2.0 forged 6 springs Pinasco for Vespa 125 VM1T/VM2T-VN1T-VN2T-VL-VB1T
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Vespa 125 VM1T > VM2T
Vespa 125 VN1T > VN2T
Vespa 150 VL1T > VL3T
Vespa 150 VB1T
Pinasco carburetor d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for assembly, including a specific foam air filter that fits perfectly in the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110-double cage
Attention--> Compatible with thermal groups in 57 stroke.
Shoulders--> 93 mm
Expansion exhaust CCcorsa V2.0 for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125 VM1>2T/VN1>2T-VB1T-VL1>3T
This exhaust has been specifically designed and developed to maximize performance on the 160cc kit. The results have been verified on the test bench after several hours of testing different geometries on the diffusers. The exhaust is an Artisan product made by manually assembling each individual piece. The attention to welding and the production process gives the product the quality and durability that distinguishes it in the market.
Vespa 125 VM1>2T/VN1>2T-150 VL1>3T-VB1T
New 8-spring solution for Vespa Wideframe and Largeframe.
The clutch has been designed and studied for those extreme uses where heat and poor lubrication prevail. Thanks to the use of discs with particular characteristics and used on Vespa Smallframe, the clutch has a
new geometry. In fact, both the basket and the drive disc have been
designed to be assembled with Smallframe discs. Also, the shim and the bushing where the primary gear pinion slides have been
carefully crafted in terms of coupling tolerances and material quality. A particular geometry of the basket and the closure ring makes it reliable in its extreme functioning.
The clutch is CNC machined from solid, made of high-performance material that undergoes a bluing treatment after machining.
It comes with 8 springs, 8 cups, 4 discs, and 3 intermediate discs. The
fact of having 8 springs allows the use of different types of
springs (different stiffness depending on engine power) and always having
a uniformly distributed load. Working on a very large diameter allows the transmission of significant loads.
Diameter 107 mm, fits PX pinions
Pinasco carburetor filter d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Complete DRT crankshaft stroke 60 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 60 mm connecting rod 110-double cage
Attention--> Compatible with thermal groups in 60 stroke.
Complete piston POLINI D.60 SELECTION A (59.935) 144/153/154 cc for ROTAX 123/ GT FALC V0012 "R"/V0013D/V0012D
Ø 60mm
2 Segments
piston pin Ø 15mm
Complete piston POLINI D.60 SELEZ.B (59.935) 144/153/154 cc for ROTAX 123/ GT FALC V0012 "R"/V0013D/V0012D
Ø 60mm
2 Segments
piston pin Ø 15mm
Carburetor sleeve Pinasco d.22 for Vespa low light 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for installation, including a specific foam air filter that fits perfectly into the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Size: 28x36mm
Complete crankshaft Falc Racing CCCorsa C57-110 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
PIAGGIO carburetor bowl, for PHVA-PHVB carburetor for Vespa ET2/LX/LXV/S/Primavera/Sprint 50ccm 2T AC
Vespa ET2/LX/LXV/S/Primavera/Sprint 50cc 2T AC
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Stroke: 57 mm connecting rod 110
Attention--> Compatible with thermal groups in stroke 57.
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Vespa 50/90/125/150/160/180/200
Complete 4-speed Pinasco gearbox for Vespa 125 VM1>2T-VN1>2T-VL1>3T-VB1T
Vespa 125 VM1T (Adaptable-adaptable)
Vespa 125 VM2T (Adaptable-adaptable)
Vespa 125 VN1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Complete with multiple shaft, WITHOUT selector
For VM1>2T versions support and starting gear with bushing.
Gear teeth: 57-52-47-43
Multiple teeth: 13-18-23-27
Multiple bearing: 12x37x12
Coppia trasmissione primaria Pinasco ( Z22/65 ) per Vespa 125/150 VM-VN-VNA-VL-VB1-VBA
Vespa 125 VM1T
Vespa 125 VM2T
Vespa 125 VN1T
Vespa 125 VNA1T
Vespa 125 VN2T
Vespa 150 VL1T
Vespa 150 VL2T
Vespa 150 VL3T
Vespa 150 VB1T
Vespa 150 VBA1T
Pinasco carburetor d.22 for Vespa low headlight 125/150 VM-VN-VL
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
A new Pinasco product is added to the wide range of products for Vespa Farobasso, the Ø 22 carburetor kit. The kit is already calibrated for the Vespa Farobasso and only requires adjustment of the main jet. The package contains all the accessories
necessary for assembly, including a specific sponge air filter that fits perfectly in the carburetor compartment without modifying any original elements. The Pinasco carburetor kit uses a Dell'Orto carburetor whose calibration components are easily available on the market for optimal carburetion.
Pinasco engine casing with 57 stroke crankshaft for Vespa faro basso 125/150 V1
Vespa 125 V1>15T
Vespa 125 V30>33T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>VN2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
Have you ever wondered what a Vespa engine from the 50s would be like
produced with 2020 technology? Pinasco can finally give you the
answer you've been waiting for with the new engine casing dedicated to the world of
"grandmothers". Die-casting technology, steel sliding track inserts,
engine casing closure with studs,
new gearbox shaft bearings, crankshaft enlarged by +7mm in
width compared to the original, reed valve intake (optional),
preparation for 4-speed gearbox, high-speed main bearings,
operating with 2% mixture.
All this without modifying the aesthetics of the engine, the external walls have NOT been sandblasted to maintain the color and raw style of the historic engines, the logos
have been placed in hidden areas and with period fonts, to have a modern product but as similar as possible to the original.
The new Pinasco Wide Frame Engine Casing allows using the Vespa
Old exactly like the more modern ones with high performance and
reliability.
Fits VL3T components or higher.
Pinasco touring classic 2.0 exhaust for Vespa 125 VM1>2T-VN1>2T/150 VB1T-VL1>3T
Vespa 125 VM1>2T/VN1>2T-VB1T-VL1>3T
Painted in black
The PINASCO TOURING exhaust has been
designed to enhance engine performance both at low and
high revs while maintaining the same level of quietness. The innovative design
that "breaks all current patterns" has been studied to achieve the
proper gas expansion which significantly increases
engine performance (about 4HP) even in stretch.
Albero motore completo Falc Racing CCCorsa C60-110 per Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM Pro Touring Exhaust for Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
The new BGM Pro Touring muffler is a real wolf in sheep's clothing: a powerful sports exhaust that perfectly blends into the unobtrusive design of a standard exhaust. Thanks to the innovative design of the BGM PRO Touring Box, with the flat diffuser opening angle and moderate resonance length, it optimally adapts to different cylinder concepts. The result? A wonderful touring machine that moves with great thrust right from low revs.
Perfect on tuning cylinders like BGM150, Pinasco160, or CC Corsa 160/175
Road Race expansion chamber exhaust type 6 days for Vespa 125 VM1>2T/VN1>2T-150 VL1>3T-VB1T
Vespa 125VM1>2T/VN1>2T-150 VL1>3T-VB1T
Perfect on tuning cylinders such as BGM150, Pinasco160, or CC Corsa 160/175
Kit 2 reed petals CCCorsa (thickness 0.4 mm) for Vespa 125 VNB-TS/150 VBA-Super/Rally/PX80-200/PE/T5/Cosa
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Vespa 200 PE
Pair of elastic rings for CCcorsa thermal group for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM/VN-150 VL/VB1T
Complete crankshaft Larchotek Passo Rolle Signature C60-115 for Vespa 125 VM/VN-150 VL/VB1T
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
LARCHOTEK Passo Rolle Signature has been specially developed for powerful Vespa Wideframe engines and, in particular, for use with the LARCHOTEK Dolomiti cylinder kit of 187 cm³.
The Signature version also stands out for the use of a high-quality racing connecting rod.
Main features
Stroke of 60 mm and connecting rod of 115 mm
Vespa 125 VM1T>VM2T
Vespa 125 VN1T>2T
Vespa 150 VL1T>VL3T
Vespa 150 VB1T
BGM PRO crankshaft for Vespa Wideframe made with high-alloy forged blanks. Ideal in combination with the BGM PRO 150cc Wideframe tuning cylinder.
The crankshaft has been designed as a heavy tuning crankshaft, but it is also clearly recommended as a practically indestructible shaft for original engines.
Stroke: 57 mm
Connecting rod length: 110 mm
Piston pin: Ø15 mm
Connecting rod bearing: needle bearing (upper and lower)
One of the main advantages of the BGM PRO crankshaft compared to the original one is the use of a high-quality connecting rod with needle bearing (instead of a simple bearing bushing) and a slotted lower connecting rod eye. This greatly reduces the oil requirement, so that the engines can run smoothly even with a 1:50 mixture with current high-quality oils.
The balance factor has been improved, among other things, thanks to a hollow crank pin.
The crankshaft is suitable for all 125 and 150 cc engines. The 125 cc engines only have a stroke of 54 mm, so a cylinder designed for a stroke of 57 mm (BGM155
Vespa 50/90/125/150/160/180/200