Pinasco electronic ignition 1.9 kg for Vespa 125 VM/VN/ACMA/150 VB1/VGL1/VL
Original reference: 26357762
Weight: 1.9 Kg
Pinasco expands the Flytech ignition range with new models
developed for the touring world for "Vespa Wide Frame". The Flytech Touring ignition is characterized by a Zama cast fan
similar to the original that maintains the Vespa's design unchanged and is
equipped with a high voltage “Sparkey” control unit. The main features of this new ignition are: - greater inertia (increase and redistribution of peripheral weight) - high voltage spark plug spark - “Original Style”, does not alter the Vespa's aesthetics - greater reliability thanks to operation without pick-up and the enhanced electronic control unit.
Vespa 125 VM1>2T
Vespa 125 VN1>2T
Vespa 150 VL1>3T
Vespa 150 VB1T
Related articles
Rubber intake sleeve (d 40-44mm) for carburetor TMX 32-35/PWK 33-35/KOSO 28-34/VHS 34-39.5/TMX 38/PWK 38
Vespa 50/90/125/150/180/200
H 39 mm
Multiple spindle nut safety lock for Vespa 180-200 Rally/PX80-200/PE/Lusso/Cosa/T5
Vespa PX 80 E V8X1T
Vespa P 125 X VNX1T 146314>
Vespa PX 125 E VNX2T
Vespa 125 PX E Arcobaleno VNX2T
Vespa 125 PX E Arcobaleno Elestart VNX2T
Vespa PX 125 T5 VNX5T
Vespa PX 125 T5 Elestart VNX5T
Vespa 125 PX CAT ZAPM50100 '07
Vespa 125 PX VNX1T Millenium '98>'05
Vespa 125 Cosa VNR1T
Vespa 125 Cosa 2 VNR2T
Vespa 125 PX 2011 ZAPM74100 2T AC
Vespa P 150 X VLX1T 264565>
Vespa PX 150 E VLX1T
Vespa PX 150 E Arcobaleno VLX1T
Vespa PX 150 E Arcobaleno Elestart VLX1T
Vespa 150 C
Glove box door gasket 108 Project for Vespa 125/150 GT-GTR-Super-Sprint
Vespa 125 Super VNC1T
Vespa 125 GT VNL1T
Vespa 125 GT VNL2T
Vespa 125 GT R VNL2T
Vespa 150 GL VLA1T (Adaptable)
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
In neoprene, to glue.
Primary transmission pair TOP Crimaz z25 on 72 bell with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T
The construction of the teeth is carried out with a module gear shaper
1.5 with relative corrections for the pinions added to the original
pair.
The width of the tooth has been widened (1 mm inward) to
provide greater strength without compromising smoothness.
The spring seats have been revised to use springs with square
wire. The greater travel of the shock absorber preserves the gearbox and clutch.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting
gears.