RDV Scootershop
RDV > Spare Parts and Accessories > Engine and parts > Primary transmission pairs > Primary transmission pair TOP Crimaz z23 on bell 72 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Primary transmission pair TOP Crimaz z23 on bell 72 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3
Available
07-EC-077-CR

Primary transmission pair TOP Crimaz z23 on bell 72 with reinforced clutch basket and shock absorber for Vespa 50/125 Special-Primavera-ET3

Original reference: DC2078-0RAP

technical specifications

The construction of the teeth is carried out with a module
1.5 gear shaper tool with relative corrections for the pinions added to the original pair.


The width of the tooth has been widened (1 mm towards the inside) to
provide greater resistance without compromising smoothness.
The spring seats have been revised to use springs with square wire. The greater stroke of the shock absorber preserves the gearbox and cruise.
In the center, there is a roller bearing on the most
stressed part and a guide bushing on the shaft. This solution
allows the bell to be compatible with the original starting gears.

Shipping time:

24/48 hours

1 point RDV = 2 cents 390 points RDV = 7,80 € cashback
390,00 €
319,67 € VAT excluded
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 PK
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Request information

Do you have any questions? Request more information from the staff

I have read and accept the use of my data according to the disclosure of privacy. Read Privacy Policy.
accept
Fields with an * (asterisk) are required

Related articles

Bevel gear primary drive pair z22 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and the pinion.

With this system, the key does not need to be used. Ideal
for tuned engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply a strong type of locking agent on the
fastening nut and to respect the tightening torque of 60-70 Nm.

A 3-thread extractor is required for disassembly, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type threadlocker on the
fastening nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z24 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type locking agent on the
fastening nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong threadlocker on the
fastening nut and to respect the tightening torque of 60-70 Nm.

A three-thread puller is required for disassembly, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z25 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for tuned engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type threadlocker on the
fixing nut and to respect the tightening torque of 60-70 Nm.

A 3-thread puller is required for disassembly, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z26 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts and interchangeable. It is recommended to apply strong type threadlocker on the
fixing nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z27 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
low availability
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type locking compound on
the fixing nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread extractor is necessary, not included.

Approfondisci
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z23 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and
for crankshafts damaged at the key seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong-type locking compound on
the fastening nut and to respect the tightening torque of 60-70 Nm.

A 3-thread puller, not included, is required for disassembly.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z24 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the
key seat.

The cone is compatible with the entire range of Piaggio
crankshafts and interchangeable.  It is recommended to apply a strong type of locking agent on the
fixing nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
Bevel gear primary transmission pair z25 on crown z61 DE for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged on the key
seat.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type lock
on the fixing nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback
-5% VMC primary transmission gear z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

Approfondisci
Shipping time
24/48 hours
24,70 € 26,00 €
20,25 € VAT excluded
1 point RDV = 2 cents 24 points RDV = 0,48 € cashback
-5% VMC primary transmission gear z25 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications


Approfondisci
Shipping time
24/48 hours
24,70 € 26,00 €
20,25 € VAT excluded
1 point RDV = 2 cents 24 points RDV = 0,48 € cashback
-5% VMC primary transmission gear z26 on crown z69 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

Approfondisci
Shipping time
24/48 hours
24,70 € 26,00 €
20,25 € VAT excluded
1 point RDV = 2 cents 24 points RDV = 0,48 € cashback
Three-hole puller for disassembling the conical gear of the primary transmission for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Provided are no. 3 M4 screws with recessed hexagon and one central hex head screw no. 13

Required wrench: 19

Approfondisci
Shipping time
24/48 hours
16,00 €
13,11 € VAT excluded
1 point RDV = 2 cents 16 points RDV = 0,32 € cashback
Lock pinion-primary transmission pair tightening bevel gear for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
low availability
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

The gear lock is used to easily block the primary transmission of your Vespa smallframe engine.

By placing the component between the sprocket and the gear, thanks to its asymmetrical shape,

we can securely and stably block the normal rotation of the gears.

Approfondisci
29,86 €
24,48 € VAT excluded
1 point RDV = 2 cents 29 points RDV = 0,58 € cashback
-5% VMC primary transmission gear z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

Approfondisci
Shipping time
24/48 hours
24,70 € 26,00 €
20,25 € VAT excluded
1 point RDV = 2 cents 24 points RDV = 0,48 € cashback
-5% VMC primary transmission gear z22 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

Approfondisci
Shipping time
24/48 hours
24,70 € 26,00 €
20,25 € VAT excluded
1 point RDV = 2 cents 24 points RDV = 0,48 € cashback
Crimaz cone sprocket mounting kit for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications


Approfondisci
Shipping time
24/48 hours
15,00 €
12,30 € VAT excluded
1 point RDV = 2 cents 15 points RDV = 0,30 € cashback
-5% EVOK primary transmission gear z23 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Made in Italy

Approfondisci
28,50 € 30,00 €
23,36 € VAT excluded
1 point RDV = 2 cents 28 points RDV = 0,56 € cashback
-5% EVOK primary transmission gear z25 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Made in Italy

Approfondisci
Shipping time
24/48 hours
28,50 € 30,00 €
23,36 € VAT excluded
1 point RDV = 2 cents 28 points RDV = 0,56 € cashback
Bevel gear primary transmission pair z26 on crown z72 DD for Vespa 50 Special-N-L-R/90/125 Primavera ET3-PK-ETS-Ape 50
Available
Compatibility

Vespa 50 V5A1T N,L,R
Vespa 50 Special V5A2>3T
Vespa 50 Special V5B1>4T
Vespa 50 PK
Vespa 50 PK XL
Vespa 90 V9A1T
Vespa 125 Primavera VMA1>2T
Vespa 125 Primavera ET3 VMB1T

Vespa 125 PK

technical specifications

Equipped with a self-locking cone capable of stably coupling the crankshaft and pinion.

With this system, the key does not need to be used. Ideal
for modified engines and for crankshafts damaged at the keyway.

The cone is compatible with the entire range of Piaggio crankshafts
and interchangeable. It is recommended to apply strong type locking compound on
the fixing nut and to respect the tightening torque of 60-70 Nm.

For disassembly, a 3-thread puller is required, not included.

Approfondisci
Shipping time
24/48 hours
55,00 €
45,08 € VAT excluded
1 point RDV = 2 cents 55 points RDV = 1,10 € cashback