Clutch z20 (67/68) - BGM PRO Superstrong 2.0 Touring CR Ultralube - Cosa2 Coating (14mm aluminum/sintered) - 20 teeth for primary wheel 67/68T - Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Original reference: BGM6820TOU
Touring CR aluminum/sintered Unlike the STD type, the Touring CR uses an ultra-modern pad type with sintered material, as is also common in the motorcycle sector. The coating support is made of high-strength aluminum with reinforced discs (width 14 mm) and an extra-wide clutch lining. The wide lining ensures smooth clutch engagement behavior and the large friction surface is extremely durable. The doubling of the material on the discs, which engage in the clutch basket, is designed for extremely high mileage. Thanks to the large contact surface, the basket and linings remain in perfect condition in the long term. Ideal for powerful engines that have to face long journeys.
Vespa PX80, PX125, PX150, T5 125cc, Cosa, Sprint150, Rally180, GT125/GTR125, TS125, GL150, Super125
Related articles
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Straight Teeth: No. 26
Helical Teeth: No. 23
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. Frequently used for acceleration races.
Note: Correct functioning is not guaranteed with primary Z.67.
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Diameter: 107 mm
Clutch group gear Z 23 on primary Z67/68 clutches with 7 springs (diam. 107 mm)
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Diameter: 107 mm
Attention--> This gear is mounted ONLY with 7-spring clutches
Clutch gear Z 24 on primary Z65 for Vespa 180/200 Rally-PX-Cosa
Vespa 180 Rally VSD1T
Vespa 200 Rally VSE1T
Vespa P 200 E VSX1T
Vespa PX 200 E VSX1T
Vespa PX 200 E Arcobaleno VSX1T
Vespa PX 200 E Arcobaleno Elestart VSX1T
Vespa 200 PE VSX1T Millennium '98
Vespa 200 Cosa VSR1T
Diameter: 107 mm
DRT 8-spring clutch disc kit for Vespa 125 VNA/VNB/TS/150 VBA/VBB/GL/Sprint/Super/180-200 Rally/PX80-200/PE/Cosa/T5
Vespa 125 VNB/GT/GTR/TS/PX
Vespa 150 VBB/GL/Sprint/Sprint Veloce/PX
Vespa 200 PE
Kit composed of--> 3 cork discs, 2 metal discs, locking ring
Attention--> Kit compatible with clutch 07-BO-046-DT
Crimaz clutch plate with 30mm bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Clutch gear group Z21 on primary Z67/68 for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z68, it fits perfectly with 7-spring clutches (Diam.107.769mm), it is possible to mount it on 6-spring clutches by turning the disc to 97 mm. It is also possible to mount it on primary 65 teeth DRT.
Clutch gear group Z22 on primary Z62 DRT/SIP for Vespa 80-125-150-200 PX PE
Vespa 80/100/125/150/200
Tested on primary Z62, it fits perfectly with 7-spring clutches (Diam.107.769mm)
BGM Pro Clutch Gear - Pro Superstrong Z 23 for 64/65 Tooth Elastic Gear Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Developed for the high performance and torque of today's engines, they are made of high-alloy steel (SCM415/15 CrMo 5), in compliance with the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) is a secure foundation for the production of BGM sprockets.
The production meets the high standards in force for Honda gear production. Each individual piece is accompanied by a test report, thus allowing BGM to have continuous and lasting quality assurance.
High quality material 15 CrMo 5
Precise production according to Honda standards
Continuous quality checks
Compatible with COSA2 clutches
Available with 22, 23, and 24 teeth
Compatible with the original primaries of all 200 c.c. engines
Compatible with engines with original primary retrofitted with 65 teeth or with BGM primary with 64/65 teeth
Helical gear clutch group Z 23 (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS- VBB-GL-Sprint -PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
DRT Z22 clutch gear on primary Z65 for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Tested on primary Z65, it fits perfectly with 7-spring clutches (Diam.107.769mm)
DRT clutch gear Z 23 for elastic gear 64/65 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
CRIMAZ clutch pressure plate with oil catcher for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125/150/200
The pressure plate is made from solid anticorodal aluminum with hard oxidation treatment. Designed
for all central spring/double central spring clutches, it has a
special shape that prevents the ring from coming out and directs oil onto
the clutch pack discs, improving their performance. Compatible with all clutch covers for smallframe Vespa.
DRT clutch gear Z 23 for elastic gear 64/65 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
DRT Z22 clutch gear on Polini Z64 primary for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
For clutch 6 springs d. 97 mm
BGM Pro Clutch Gear - Pro Superstrong Z 22 for 64/65 Tooth Cush Drive Gear Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Developed for the high performance and torque of today's engines, they are made of highly alloyed steel (SCM415/15 CrMo 5), in compliance with the highest production standards. The enormous strength of the base material (up to 1100N/mm2, HRC 58-62) is a reliable foundation for the production of BGM sprockets.
The production meets the high standards in place for Honda gear manufacturing. Each individual piece is accompanied by a test report, allowing BGM to have continuous and lasting quality assurance.
High-quality material 15 CrMo 5
Precise production according to Honda standards
Continuous quality controls
Compatible with COSA2 clutches
Available with 22, 23, and 24 teeth
Compatible with the original primary of all 200 c.c. engines
Compatible with engines with original primary retrofitted with 65 teeth or with BGM primary with 64/65 teeth
Clutch gear 8/12 springs BGM Z 23 dd for elastic gear 63 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Clutch gear group 6 springs Pinasco Z22 on primary Z64 for Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
Vespa 80-125-150-200 PX PE-GT-GTR-SPRINT-V-TS-GL-RALLY
For clutch 6 springs d. 97 mm
DRT Z 23 helical gear clutch group (6 springs) on primary Z67/68 for Vespa 125/150 VNB-GT-GTR-TS-VBB-GL-Sprint-PX
Vespa 125 VNB/GT/GTR/TS/VBB/GL/Sprint/Sprint Veloce (required 07-DH-105-DR)
Vespa 125/150 PX
Diameter: 97 mm
height: 34 mm
Elastic ring for clutch pack tightening BGM Pro Superstrong Ø=108 am=6.3mm al=1.5mm- Vespa GS 150 (VS1T, VS2T, VS3T, VS4T, VS5T), GS 160 (VSB1T, VSB2T), SS 180 (VSC1T), Rally 180 (VSD1T), Rally 200 (VSE1T), PX 200 (VSX1T), PX 150 (1995-) PX 125 (1995-), T5
Vespa 200 PE VSX1T
Vespa 200 Rally VSE1T
Vespa 200 Cosa VSR1T
Clutch gear 8/12 springs Pinasco Z 22 dd for elastic gear 63 teeth Vespa 200-PX-PE-Rally
Vespa 200 PE
Vespa 200 Rally
Straight-tooth gear & bull clutch Pinasco
Fabbri Racing clutch pressure plate with bearing for Vespa 50/90/125 Special-N-L-R-Primavera-ET3
Vespa 50/90/125/150/200
DEXTER racing clutch plate with axial thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
SIP PK XL2 2.0 clutch plate with thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Clutch plate MALOSSI with thrust bearing for Vespa 50-125/PV/ET3/PK/S/XL
Vespa 50/90/125
Malossi also thinks about the most hidden corners of the engine, as in the case of the thrust plate for Vespa Smallframe. If you are an experienced Vespa enthusiast, you certainly know that every time you pull the clutch lever, a brass pin cries from the effort.
At Malossi, we wondered how to solve the issue and responded with a new thrust plate for Vespa Smallframe that guarantees a longer lifespan for the pin, better lever feel, and greater efficiency.
Why choose the thrust plate for Vespa Smallframe
First of all, let's specify that the thrust plate is an accessory we recommend adding to our clutch for Vespa Smallframe, even though it is perfectly compatible with the original one.
Replacing the original Vespa plate with the Malossi one means saving the brass pin from sliding in its seat, effectively exponentially increasing its useful life.
The advantages don't end there because, with the Malossi thrust plate for Vespa Smallframe, the clutch disengagement is smoother, and gear changes are softer and more precise.
Features of the thrust plate for Vespa Smallframe
The original thrust plate is a single block, consequently, with
Clutch cover OR ring for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200
Crimaz rack and pinion for Vespa 125 VNA-TS/150 VBA-Super/Rally/PX80-200/PE/Lusso/T5/Cosa
Vespa 125 VNA1>2T
Vespa 125 VNB1>6T
Vespa 125 Super VNC1T
Vespa 125 GT VNL2T
Vespa 125 GTR VNL2T
Vespa 125 TS VNL3T
Vespa 125 PX
Vespa 125 PX T5 VNXST
Vespa 150 VBA1T
Vespa 150 VBB1>2T
Vespa 150 GL VLA1T
Vespa 150 Super VBC1T
Vespa 150 Sprint VLB1T
Vespa 150 Sprint Veloce VLB1T
Vespa 150 PX
Perfectly compatible without any modification, it increases the operating pressure by significantly "softening" the lever.
EVOK clutch plate with 30mm bearing for Vespa 50-125/PV/ET3/PK/S/XL/VNA-TS/150 VBA-Super/PX80-150/PE/Lusso
Vespa 50/90/125/150/200
Ring OR clutch cover for Vespa 125 VM/VN/VNA/VNB/VBB/Sprint/GT/GTR/TS/VL-Super/160 GS/180 SS/Rally/PX80-200/PE
Vespa 125 1953>
Vespa 150 1954>
Vespa 160
Vespa 180
Vespa 200